Read Crushing and Screening.xls text version

Tradepost - 22 June 2012 - Crushing and Screening

For more information please contact Jakkals Smal Tel +27 82 - 455 9779, Faks +27 866 728 762, e-mail [email protected], RSA Prices exclude VAT, unless specified For comprehensive lists of items available / required, please visit our WebPage www.tradepost.co.za, click on "Vind Lyste" (In the Main Menu, left, top of your screen, under the skets of the little house). Under Trade Post Ads, in red, just to the right of "Vind Lyste", select the list that you want to view or download. In order to offer items to customers or advertise on my website, the following information is required: 1) Detailed description of item/s 2) Delivery period, if applicable 3) Price/s that must include my commission. I refer prospective buyers to you. You do the transaction and give me 5% commission of the final selling price, or in the event that 5% of the selling price is less than R1 000, a minimum amount of R1 000 per transaction. Commission payable by customers from outside the borders of South Africa, is excluded from VAT. All the commission I receive from customers from within the borders of South Africa, is subject to VAT and as result VAT will be payable on all commission, irrespective if VAT was applicable between the buyer and the seller 4) Conformation that my commission is included in the price/s must specified on the e-mail that you send me 5) Photographs, if applicable. Photographs must please be in JPEG format. Photographs and descriptions must be matchable, if necessary, send separate e-mails, with photographs and description for every item 6) Location, country, or if in RSA, the town or province, where the item/s can be viewed by prospective buyers. INDEX CA CA CB CF CG CH CK CM CR CS CT

Screening services Vibrating screens poly panels Vibrating screens wire mesh Pan feeders Vibrating grizzley feeders Stationary grizzley`s Trommel screens Mobile screens Screens other Screen componets Screening plants

DA DC DJ DK DM DR DS DT Z

Crushers services Cone crushers Jaw crushers Impact crushers Mobile & Semi-Mobile Crushers Roller crushers Granulators / Pulverisers Crushing plants Almal is agente vir VIND

ITEMS AVAILABLE

Screening Services available

CAA001 Screening services at toll-rates, availability and prices on request www.tradepost.co.za

Vibrating screens poly panels available www.tradepost.co.za CAA203 Refurbished Telsmith 6 x 16 Vibrating Screen, poly panels, double deck screen, new decks, side plates, bearings and counterweight components, Cape Town area, R270 000. New stand, underpan, catwalks, motor, drive pulleys and guards, R160 000 each

CAA031 9 x 22 Vibrating Screen, single deck, poly panels, with vibrating mechanisms, Witbank R 250 000 CAA082 10 x 18 Allis Chalmers Vibrating Screen, single deck, without motors, poly panels. R 170 000 and with motors, R 270 000. Gauteng CAA141 4 x 10 Vibrating Screen, poly panels, single deck, 525 Volt vibrator motors, sump, 2 x 3/2 Warman pumps, as new, Kimberley. R 200 000

CAA218 New Vibrating Screens, complete with, poly panels, supesion springs, vibrator motors and side wear plates, 6 to 8 weeks delivery, Gauteng. 3 x 7 Single deck screen, R73 182. 3 x 12 Double deck screen, R192 198 4 x 12 Double deck screen, R283 461 5 x 14 Double deck screen, R330 435 6 x 16 Single deck screen, R363 622 6 x 16 Double deck screen, R522 790 Underpan, stand and walkways suitable for a 6 x 16 Vibrating screen, R118k CAA212 5 x 16 Allis Chalmers Vibrating Screeen, double deck, poly panels, bridge sections for motor mounts available, Gauteng. As is, R 48k. Recondioned, 2 weeks delivery, R 95k. Recondioned, with new stand and underpan 4 weeks delivery, R 255k CAA216 5 x 16 Osborn Vibrating Screen, double deck, stringers removed, suitable for wire mesh or poly panels, comes with two motor mounts (bridges) suitable for 2 or 4 vibrator motors, Gauteng. R 72k CAA217 New 6 x 16 Vibrating Screen, double deck, complete with vibrator motors, panels and suspension springs, 6 to 8 weeks delivery, Gauteng, R 450k. New stand and underpan can be supplied. Stand, R 17 500. Underpan, R 23k

CAA224 New 5 x 14 Double Deck Vibrating Screen c/w Italvibras vibrator motors, coil springs, polyurethane panels, 5 to 6 weeks delivery, Gauteng, R331 450. Optional extra: Frame c/w walkways, handrails & staircase, R62 800. Under pan for bottom deck of screen, R31 675 CAA234 2.4 x 7.2 m Pegson Vibrating Screen, triple deck, poly panels, complete with full set of springs and spring bases, 37 kW vibrator motor, currently fitted with 20-24 mm polyurethane tiles on top, 17 mm on middle and 10 mm tiles on bottom deck, £14,500 ex works UK as is. Refurbished i.e. shotblasted and repainted in primer and top coat gloss, electric motor checked over, screen checked over and repaired if required, £21,750 ex works UK CAA235 6 x 20 ft Allis Chalmers Ripl-Flo Screen, triple deck, poly panels, currently fitted with polyurethane tile system (to take 600 mm x 300 mm modules), complete with coil springs and spring bases (x 4), no vibrator motors, £15,000 ex works UK as is. Refurbished i.e. Repaired as necessary, shotblasted and repainted in your preferred colour, new vibrator motor, £24,780 ex works UK

CAA236 8 x 20 ft Hewitt Robins Vibrating Screen, double deck, poly panels, Currently fitted with side clamped rubber mats (one screen has 4 x 10mm and 1 x 12mm on top and 3mm slotted on the bottom, the other has 12mm top and 5 mm bottom). Complete with a full set of (eight) coil springs, spring bases and four support frames no vibrator motor included, £12,850 ex works (UK) as is. Refurbished with vibrator motor, £21,800 ex works (UK) CAA237 4 x 8 Vibrating screen, single deck, poly panels, with vibrator motors, Kimberley area. R30 000 CAA238 5 x 14 Allis Charmers Vibrating Screen, single deck, poly panels, Gauteng. R90 000

CAA240 Refurbished Telsmith 5 x 16 Vibrating Screen, double deck, poly panels, SA 32 vibrating mechanism, new decks, side plates, counterweight components, R260 000. Stand to suit, including under-pan, discharge chutes, catwalks, access stairs, electric motor, pulleys, v-belts and safety guards, R165 000. 4 Weeks delivery, Cape Town area CAA243 Reconditioned 8 x 20 ft Hewitt-Robins Vibrating Screen, double deck, poly panels, mechanical drive, new electric motor and new poly panels, 4 to 6 weeks delivery, R576. A new stand, under pan, ladder and walkways can be supplied at an additional cost of R136k Gauteng CAA239 Newly build 4 x 10 Vibrating Screen, single deck, poly panels, reconditioned vibrator motors, stand, underpan, springs and chute, 4 to 5 weeks delivery, Gauteng, R260 000. Price excludes poly panels, these can be supplied at an additional cost. Refer attached photographs of a unit recently sold CAA241 6 x 16 Vibrating Screen, double deck, poly panels, Gauteng. "As is", R95 000. Refurbished, R125 000. Refurbished with stand, platform and ladder, R165 000. Refurbished with stand, platform, ladder, under-pan and discharge chutes, R255 000 CAA244 Refurbished 12 ft X 20 ft Vibrating Screen, single deck, poly panels, with vibrator motors, stand, under pan, walkway and hand-railings, Gauteng. R1.1m

CAA245 Refurbished 6 x 16 ft Telsmith Vibrating Screen, poly panels, double deck, with 3 m high stand and rubber lined under pan, 3 weeks delivery, Cape Town R485 000 CAA246 New 6 x 16 ft Vibrating Screen, single deck, poly panels, price excludes vibrator motors, panels and stand, 2 weeks delivery, Gauteng. R160 000

Vibrating screens wire mesh available www.tradepost.co.za CAB216 New Vibrating Screens, complete with, wire mesh screening media, suspension springs, vibrator motors and side wear plates, 3 to 4 weeks delivery, Gauteng. 600 x 1 200 mm Single deck screen, R58 855 750 x 1 500 mm Double deck screen, R46 956 915 x 3 660 mm Double deck screen, R182 802 1 220 x 3 660 mm Double deck screen, R264 021 1 830 x 4 880 mm Single deck screen, R342 246 1 830 x 4 880 Triple deck screen, R577 697

CAB142 Telsmith triple and double deck screens, wire mesh fully refurbished, including new bearings, decks & side plates, 60 % deposit with order, 4 weeks delivery, Cape Town area. Triple deck 4 x 12 screen, R230 000. Triple deck 5 x 16 screen, R270 000. Triple deck 6 x 16 screen, R310 000. Double deck 6 x 16 screen, R270 000. New stand, underpan, catwalks, motor, drive pulleys and guards, R160 000 each CAB204 Reconditioned 7 x 20 Vibrating Screen, double deck, wire mesh, top mounted mechanical vibrating mechanism, 4 weeks delivery, Gauteng. R 287 000 CAB221 7 x 20 Linkbelt Vibrating Screen, wire mesh, fully refurbished (side plates and decks replaced if necessary), stand, underpan, chutes and motor to be supplied, 4 to 5 weeks delivery, Gauteng. R650 000 or R120 000 "as is:

CAB230 Refurbished 6 x 20 Telsmith Vibrating Screens, tripple deck, wire mesh, SA 32 vibrating mechanism, new decks, side plates, counterweight components, 4 weeks delivery, Cape Town. R520 000 CAB235 Refurbished Telsmith 5 x 14 Vibrating Screen, triple deck, wire mesh, with drive pulley, new decks, side plates, bearings and without frame, 3 to 4 weeks delivery, Cape Town area. R275 000

CAB222 Refurbished 6 x 16 Telsmith Vibrating Screen, triple deck, wire mesh, with new stand, under pan, electric motor, decks and side panels, 4 weeks delivery, Cape Town. R485 000 CAB223 6 x 16 Nordberg Vibrating Screen with stand and underpan, double deck, wire mesh, very good condition, the support structure is strong but the under pan need a bit of work, Gauteng. R250 000 CAB229 Refurbished 5 x 16 Telsmith Vibrating Screens, wire mesh, SA 32 vibrating mechanism, new decks, side plates, counterweight components. Double deck screen, R260 000. Triple deck screen, R270 000. Stand to suit, including underpan, discharge chutes, catwalks, access stairs, electric motor, pulleys, v-belts and safety guards, R165 000. Availability on request , Cape Town area

CAB228 6 x 16 ft Osborn type screen Vibrating Screen, triple deck, wire mesh, complete with stand, under pan and chutes decks, side plates, stand, springs, motor and bearings,good used bearing housings and shaft (will supply a new shaft if the used one is not suitable). 4 to 5 Weeks delivery, Gauteng. R550 000 Refer attached photographs of a similar unit recently sold CAB231 4 x 18 ft Vibrating Screen, triple deck, wire mesh top and poly panels middle and bottom decks, complete with stand, under pan, vibrator motors and discharge chute, Kimberely area. R320 000 CAB232 Fully refurbished 5 x 11 ft Vibrating Screen, double deck, wire mesh. Price includes 2 x reconditioned 6.5 kW vibrator motors, stand, under pan, discharge chutes and 750 mm wide x 9 m long discharge conveyor. Rustenburg area, R300 000

CAB234 Refurbished 5 x 12 Telsmith Vibrating Screen, double deck, wire mesh, Gauteng. R130 000 CAB236 New 4 x 10 ft Vibrating Screen, wire mesh, double deck, with reconditioned vibrator motors, 4 weeks delivery, Gauteng, R150 000. A stand with suspension springs and an under pan can be manufactured at an additional cost of R100 000 CAB237 Vibrating Screen, 1.2 x 2.2 m, wire mesh, single deck, with feedbin and product belt, Kimberley area. R150 000

CAB238 Pilot Crushtec 4 x 8 Vibrating Screen, double deck, wire mesh, cleaned up and sold in good running order with new stand, 2 to 3 weeks delivery, Gauteng. R170 000 CAB239 4 x 14 ft Hewitt Robins Vibrating Screen, triple deck screen, wire mesh, good condition, Gauteng. R90 000 CAB240 6 x 16 Osborn Vibrating Screen, in excellent condition, triple deck, wire mesh, with skid frame, under pan and walkways, Pretoria area. R378 000

CAB241 4 ft x 8 ft Vibrating Screen, double deck, wire mesh, with stand, under pan and chutes, 2 weeks delivery to complete the stand, Gauteng. R175 000 CAB242 1.2 x 3 m Vibrating Screen, wire mesh, triple deck, mounted on a chassis with bottom conveyor (without conveyor belt), price includes electric motor, Western Cape. R250 000

Pan feeders available www.tradepost.co.za CAF205 Pan Feeder, 600 mm wide x 1.3 m long, suitable for 70 tph, with reconditioned vibrator motors, 1 week delivery, Gauteng. R 45 000

CAF206 New Pan feeder 600 x 1200 including 0.8 kW Visam vibrator motors, coil suspension and Hardox pan liners, 2 weeks delivery, Gauteng. R 38 953 CAF209 Jeffrey Vibrating Pan Feeder, 50" wide x 10' long, type: FDR, 600 Amp, dual vibrator motors, 550V/3Ph/60Hz, serial No: 1777, good condition, ready to go to work. $41,500.00 FOB USA CAF210 General Kinematics Vibrating Pan Feeder/Chute, 5' wide x 8' long feeder/chute, 10 HP/575V/3Ph/60 Hz/705 rpm vibrator motor, vibrator model: 6-961062-40 BG4, type: CJI4B, frame: 326YZ, mounted on frame, good condition and ready for shipping. $12,800 FOB USA CAF211 Nico TR-1100 Hydrastroke Jaw Crusher Feeder, 60" wide x 14' long, 500 tph, 40 hp/575 V/3 Phase/60 Hz vibrator motors. Unit remains intact, indoors and in very good condition. $30,500 FOB USA CAF204 New Pan Feeders, complete with, supesion springs, vibrator motors and wear plates, 6 to 8 weeks delivery, Gauteng. 600 x 1 300 mm Pan feeder, R 36 768 600 x 2 600 mm Pan feeder, R 79 909 1 000 x 1 500 mm Pan feeder, R 61 973 CAF212 2 Off Pan Feeders, 600 mm wide x 4 m long, 1.1 kW vibrating motors with coil springs, Free State. R26 250 each

CAF213 New 915 x 2 500 mm Pan Feeder, complete with vibrator motors and rosta mounts, suitable for 80 tph, 2 to 3 weeks delivery, Gauteng. R103 500

Vibrating grizzly feeders available www.tradepost.co.za CAG106 New Vibrating Grizzly Feeders, complete with, suspension springs, vibrator motors and wear plates, 4 to 6 weeks delivery, Gauteng. 600 x 2 600 mm Grizzly feeder, R79 909 750 x 2 500 mm Grizzly feeder, R122 412 1 000 x 4 500 mm Grizzly feeder, R295 103 1 200 x 3 500 mm Grizzly feeder, R322 137 1 200 x 3 800 mm Grizzly feeder, R334 368

Stationary grizzley`s available

www.tradepost.co.za

CAG143 Telsmith vibrating grizzly feeder, 1.2 x 4.0 m, Telsmith vibrating mechanism with drive pulley, reconditioned with new deck (deadbox or full effective screening area) and new side plates, 3 weeks delivery, Cape Town. R 273k CAG201 Hewitt Robin's VGF, 4 x 16 ft, with new tray and grizzley bars, without stand and electric motor, 3 to 4 weeks delivery, 50% deposit with order, Gauteng. R 200k or Vibrator Unit "as is", R 90k CAG203 Telsmith 3 x 16 Vibrating Grizzley Feeder, step deck, Cape Town area. R 140k

CAG206 New 1.5 x 4.8 m Hewitt Robin's type VGF similar to photographs, 4 ft grizzley bar section, isolation springs and 22 kW electric motor, R 240k. 1.5 m Hewitt Robin's VGF Mechanism only, R 110k. 4 Weeks delivery, Gauteng CAG211 Sizemech Mobile Vibrating Grizzley Feeder, 1 000 x 3 000 VGF, S/N VGF 570, double deck with 8 pins per deck, feedchute and product conveyor, excellent condition, 2.3 kW vibrator motors, Wolmaranstad. R230k CAG213 Reconditioned 3 x 12 ft Telsmith 22H Vibrating Grizzley Feeder with hopper, skid mounted, Gauteng. R480 000

CAG218 New Vibrating Grizzley Feeder, 1.080 m wide x 3.890 m long, 1.5 m grizzly bars, 2 x 4.3 kW vibrator motors, 12 x coil springs, 10 mm liner plates, Gauteng. R294k CAG219 New Telsmith 3 x 12 Vibrating Grizzly Feeder, similar to photograph, 3 weeks delivery, Cape Town area. R270 000

Trommel screens available www.tradepost.co.za CAK113 New Mobile Trommel screen, 250 th, 100 x 50 mm apertures or as per client requirements, 2 x product belts, Kimberley. R 1.45m CAK200 Trommel Screen, 4 m x 1 m, newly built never used, needs motor, gearbox and mesh, Cape Town area. R 42k CAK204 Taurus Screen, Bateman, Kimberley area. R 1.1m

CAK206 Rotaspirals / Trommel screens designed and manufactured to customer specifications. Prices and availabilities on request

CAK205 Trommel Screen, Oranje Vaal Engineering, Kimberley area. R 1.1m CAK207 New Trommel screens, manufactured to suit customer requirements, Gauteng. Prices and deliveries on request CAK208 New Trommel Screen suitable for 50 tph Gypsum, fed by a 6 m³ bin and 900 mm wide by 12 m long conveyor with a 600 mm wide by 12 m long stockpile conveyor. 1.5 m dia x 3.8 m Trommel screen fitted with 3 mm thick perforated plate with 12 mm holes throughout the length of the trommel, comprising of three interconnected sections, each of 1. 265 m long and fitted with lifters, R483 322. The 6 m³ bin can be equipped with a vibrating feeder to feed onto the inlet conveyor, at an additional cost of R55 700.00. Gauteng, 6 to 7 weeks delivery

Mobile Screens & Scalpers available www.tradepost.co.za CAM803 2005 Finlay 694 3-deck screen (20 feet), 5 550 hrs, new engine, Gauteng. R650 000 CAM817 Parker Mobile Double Deck Screen, 4 cylinder diesel engine, new wire mesh, skirting rubbers and liners, unit to be painted, Gauteng. R 890 000 CAM818 Vibrating Live Head suitable for a Power Screen, model 600 or 1400, Gauteng. R85 000

CAM846 2003 Fintec 540 Mobile Screen, double deck 5 x 10, Deutz engine, 1 300 original hours, becomes available first week in August 2011 in Durban and then gets relocated to Cape Town. R800 000 CAM850 Power Screen Chieftain 600 Mobile Screen, double deck, refurbished Deutz engine with 0 hours - one year warranty, 1 week delivery, Cape Town area. R620 000 CAM853 2006 Metso BG171 Locotrack Scalping Screen, 3 542 hrs, Bloemfontein area. R1.145m

CAM854 2 Off Nordberg Metso ST356 Mobile Screens, double deck, currently in workshop for minor repairs. Models 2001 & 2003, current hour meter readings show 4 178 hrs & 7 210 hrs hrs, both units equipeed with reconditioned engines, Guateng, R600 000 each or sold as a package for R1.05m CAM855 Finlay mobile Screen, 20 x 5 ft, trailer mount, equivalent to a Finlay 693, North West province. R850 000 CAM856 Power Screen, Chieftain 600 Mobile Screen in good running order, Cape Town area. R695 000

Screens other available www.tradepost.co.za CAR119 Humboldt Wedag Vibrating Screens, models, capacities, availabilities and prices on request, Gauteng

CAR171 2 x New Linear screens, 25 m², Delkor design, structures only, Gauteng. R 500k each CAR172 Morgenson Sizer, 5 deck, 1.2 m wide x 1. 6 m long, double vibratory motors, Gauteng. R 90k CAR173 New Sweco type Screens manufactured on order, from 12" to 60", 3 to 4 weeks delivery, Gauteng. New 60" Sweco Screen, mild steel, R 147k. New 60" Sweco Screen stainlees steel, R168k

CAR174 Linear screens and screen components, such as steel belts, screen cloth, filter cloth and tracking valves designed and manufactured to customer specifications. Prices and availabilities on request CAR175 New 1200 x 3000 mm Vibrating Screen, multi deck, finger type, 2.3 kW - 380 V vibrator motor, 100 tph, Pretoria. R73 000

Screen components available www.tradepost.co.za CAS199 4 Off Reconditioned Allis Chalmers vibrating mechanism`s Type 4-3 E, 6 weeks delivery, ex works UK. £10,000.00 UK Pounds each

CAS197 Allis Chalmers 4/3 Vibrating Mechanism, mounted on a screen beam, in excellent condition, Gauteng. R45 000 CAS200 Refurbished 3 ft Hewitt Robbins Dive Unit, with new bearings, seals, seal collar and oil level gauge, Gauteng. R87 000

Screening plants available www.tradepost.co.za CAT197 Complete Screening Plants can be put together, to comply with customer specifications, utilizing reconditioned equipment or reconditioning used equipment, to reduce cost. In order to compile a budget price, the following information would be required: 1 Material or product to be screened 2 Feed size, maximum size of the material that will be fed onto the screening plant 3 Feed rate, tons per hour / day 4 Product sizes, final fraction sizes required

CAT201 Screening Plant, 30 to 40 tph capacity, comprising of the following. Feed Bin with plate feeder underneath, R100k. 15 m x 600 mm Conveyor from bin to screen, R80k. 4 x 10 Double deck screen complete, R220k. 3 of 10 m x 450 mm Stock pile conveyors, R120k. Electrical Switch gear for plant, R50k. 3 to 5 Weeks delivery, Gauteng CAT204 Screening Plant, comprising off 1.2 x 3 m double deck screen (30 degrees), bin, feeder and two conveyors, Klerksdorp area. R250 000

CAT205 Screening Plant suitable for 25 to 30 tph gypsum or agricultural lime, comprising of: 1) 4 x 10 Single deck vibrating screen complete with stand, under pan and reconditioned vibrator motors, mounted on a heavy duty skid frame. R250 000 + R15 000 for screen panels/screen mesh 2) 6 to 8 m³ Feed bin with vibrating plate feeder, 2 x reconditioned vibrator motors. The bin will be mounted on a heavy duty skid frame with extension legs to raise the unit to feed directly onto the screen. R180 000. 3) 2 Off 600 mm wide x 10 m long Stacking conveyors, with slewing wheels (driven with a 5.5 kW motor with inline box). R150 000 4) Electrical switchgear and cabling, 380 Volts. R75 000. Price specified are budget prices only, which must be finalized with the design. Switchgear and cabling will be new. Components and structures will be good used, refurbished or newly fabricated. Gauteng CAT208 Screening Plant suitable for 25 to 30 tph gypsum or agricultural lime, comprising of: 1) 3m x 1m trommel screen with mesh size of your choice, R165 000 2) 6 to 8 m³ Feed bin with vibrating plate feeder, 2 x reconditioned vibrator motors. The bin will be mounted on a heavy duty skid frame with extension legs to raise the unit to feed directly onto the screen. R180 000. 3) 2 Off 600 mm wide x 10 m long Stacking conveyors, with slewing wheels (driven with a 5.5kw motor with inline box). R150 000 4) Electrical switchgear and cabling, 380 Volts. R50 000. Price specified are budget prices only, which must be finalized with the design. Switchgear and cabling will be new. Components and structures will be good used, refurbished or newly fabricated. Gauteng CAT206 2 Off Screening Plants, suitable for 25 to 30 tph of Gypsum. Comprising of refurbished and good used components. In-loading bin - 6 m³, feed conveyor to screen, 3 x 10 vibrating screen with stand ­ platform - vibrating motors ­ underpan and chutes, 2 x 15 m long stockpile conveyors, 3 to 4 weeks delivery, Gauteng. R385 000 each CAT207 Screening Plant, suitable for 25 to 30 tph of Gypsum. New In ­loading bin - 6 m³, new feed conveyor to trommel screen, 2 m long x 1.5 m dia refurbished trommel screen, new out loading conveyor, 2 new 12 m long stockpile conveyors, 3 to 4 weeks delivery, Gauteng. R250 000 CAT209 New build 1 m dia x 3 m long Trommel Screen, complete with new or reconditioned 7.5 kW - 380Volt electric motor and gearbox, feed chute suitable for a Bobcat or TLB bucket, 2 sizes wire mesh, under and oversize chute, R165 000. 2 Off good used Stacking Conveyors, 600 mm wide x 10 m long, 3 kW - 380 Volt inline gearbox, excellent condition, R65 000 each. Guateng, 3 weeks delivery, refer attached photographs of a unit recently sold. Price excludes switchgear and cabling. These can be supplied at an additional cost

CAT210 Newly build Trommel Screen 1 500 mm dia x 3 800 mm Long c/w supports, inlet and outlet chutes and diffuser plates, R134 333. 3 Off 500 mm wide x 8 000 mm Long conveyors c/w drives, idlers and leg supports, R58 755 each. 3m³ Feed Bin c/w support & legs, R28 762.00. Electrics, cabling, glands, stop/start, cut-out for 4 drives totaling 12.1 kW, R48 645. 5 To 6 weeks delivery, Gauteng

Crusher Services available

DAA001 Crushing at toll-rates, availability and prices on request

www.tradepost.co.za

DAA007 Consultancy services for Chrome, Ferro Chrome slag and Copper crushing operations, Gauteng. POR

DAA008 Shanboa Jaw Crushres, Cone Crushres, Hammer Mills, Vertical and Horizontal Impactors Crushres and Roll Crushers, fully supported with wear parts, spare parts and after sales service, Gauteng. Prices and availabilities on request

Cone Crushers available www.tradepost.co.za DAC104 3 ft Symons cone crusher, standard head, reconditioned, 3 month warranty, with motor and lube system, 3 to 4 weeks, Gauteng. R 685k

DAC035 3 Off 24" Telsmith Cone Crusher, standard, reconditioned, with lube system, Gauteng. R425k each DAC222 Reconditioned Allis Chalmers 84" Hydrocone Crusher, lube system, cooling system, hydroset adjustment, 315 kW electric motor, 2 to 3 months delivery, Gauteng. R 4.0m 70% dep with order and 30% on final inspection

DAC246 Reconditioned 7 ft Symons Cone Crusher, standatd, main shaft assembly, Gauteng. R 756 000.00 DAC247 2 x Mainframes, suitable for 3 ft Symons Cone Crushers, complete with spring segments, "as is", R 125k each. Reconditioned with mainframe bush, R 315k each. Gauteng. DAC249 Reconditioned 3 ft Symons Gyro Disc, support bowls, complete with upper liner, wedge and bolts, Gauteng. R 105k each

DAC251 Reconditioned 4 ft Symons GYD Gyradisc, complete with lube system and electric motor, 4 weeks from date of order, Gauteng. R 1.385m DAC256 Reconditioned Symons 3 ft STD Support Bowl, complete with liner, Gauteng. R 102 235 DAC257 Reconditioned Symons 4¼ ft STD mainshaft assembly complete, R 192 215.00. Reconditioned Symons 4¼ ft short head mainshaft assembly complete, R 184 625.00. Gauteng

DAC285 2" Cone Crusher, ex China, with stand, lube system and electric motor, Gauteng. R 440k DAC318 Countershaft boxes, suitable for 3 ft Symons Cone Crushers. 1 x Long type, good condition, R 25 000. 1 x Short type, good condition, R 22 000. Gauteng DAC321 Reconditioned 7 ft Symons Cone Crusher, standard head, complete with stand, electric motor and lube system, 6 to 8 weeks delivery, Gauteng. R 4.2m DAC327 Reconditioned 4¼ ft Symons Cone Crushers, standard head with lube system, 10 to 12 weeks delivery, Gauteng. R 1.29m Electric motor optional extra ±R 40k

DAC258 Reconditioned 4¼ ft Symons STD Support Bowl, complete with liner of choice, R227 865. Reconditioned 4¼ ft Symons STD Support Bowl, complete with liner of choice, R187 865 + old bowl on a service exchange basis. Reconditioned 4¼ ft Symons short head Support Bowl, complete with lliner of choice, TBA. Reconditioned 4¼ ft Symons short head Support Bowl, complete with lliner of choice, TBA + old bowl on a service exchange basis. Gauteng DAC260 Reconditioned 48" Telsmith FC mainshaft assembly, Gauteng. R 72 650.00 DAC264 22" Allis Chalmers Cone Crusher, standard head, with electric motor, hydraulics, control panel & stand, recently reconditioned and operated for 3 months only before being replaced with a larger crusher, Middelburg area. R 330k

DAC296 Reconditioned Symons 4¼ Cone Crusher, standard head, complete with lube system and 132 kW electrical Motor, Gauteng. R1.32m DAC306 Reconditioned Symons 4¼' STD Mainframe c/w adjustment ring, springs, segments & outer eccentric bush, Gauteng. R595 000

DAC312 3 Ft Nordberg Cone Crusher, gyro disc, good working condition, lube system and electric motor, Phalaborwa. R 280 000 DAC316 Telsmith 36" Cone Crusher components. Standard FC mainframe, with springs, R375 565. Standard FC lower mainframe, R205 250. Standard FC mainshaft assembly with liners, R75 255. Standard FC eccentric with main drivegear, 3 to 4 weeks delivery, R83 015. Standard FC countershaft box, 2 weeks delivery, R55 050. Gauteng DAC317 4¼ ft Symons Cone Crushers, standard head, lube system and electric motor, Welkom area. R780 000

DAC326 Reconditioned Telsmith 36S FC Cone Crusher with lube system and electric motor, 4 weeks delivery, gauteng. R 925k DAC330 Fuller Traylor 54" x 74" Bulldog type Gyratory Crusher, capacity: 1200 tph, inlet size: 54" (1350 mm), discharge size: 8" (200 mm), material: Limestone, speed: 200 rpm, USA. $650 000 USD DAC332 2 Off 7 ft Nordberg Cone Crushers, short head, with lube systems and electric motors, UK. $180 000 each

DAC334 Reconditioned 5½ ft Symons Cone Crusher, short head, lube system, electric motor, hydraulics, control cab, lock post, bowl rotation cylinders, tramp iron cylinders, 12 months full guarantee, ready to go, Gauteng. R3.135m DAC335 Reconditioned 5½ ft Symons Cone Crusher, short head, with lube system and electric motor, 16 weeks delivery, Gauteng. R2.4m DAC333 Reconditioned 2 ft Symons standard Cone Crusher, with lubrications system, without electric motor, 4 weeks delivery, Gauteng. R425k DAC336 Refurbished ±2004 Metso HP200 Cone Crusher, short head / standard head, hydraulic setting and clamping, oil tank and hydraulics, oil cooler and switchgear, 3 month major component warranty, 8 weeks delivery, Cape Town area. R1.2m DAC337 5½ ft Symons Cone Crusher, short head, S/N C5644, hydraulic adjust, hydraulic clamping, 200 HP electric motor, offered as is where is. It was disassembled and inspected, but is not reconditioned. $219,750 FOB (USA) List of spare parts available, which is not included in the purchase price

DAC339 New 3 ft Symons Cone Crusher, Chinese version, standard head, with lube system, 525 Volt electric motor and stater panel, Gauteng. R750k DAC340 New 4¼ ft Symons Cone Crusher, Chinese version, standard head, with lube system, 525 Volt electric motor and stater panel, Gauteng. R1.550m DAC342 Refurbished 3 ft Symons Cone Crusher, short head, 3 weeks delivery, Nelspruit. R500 000 DAC345 2 Off New Concave Support Bowls, suitable for a 36" D style, Telsmith cone crusher, standard head, Gauteng.

R82 000 each

DAC346 Reconditioned 4¼ ft Symons Cone Crusher, standard head, with lube system, 10 weeks delivery, Cape Town. R1.3m DAC349 4¼ ft Symons Cone Crusher, short head, complete with stand, lube system and electric motor, in daily use, Limpopo Province. R1.2m DAC347 New 4¼ ft Cone Crusher, standard head, with lube system and electric motor, 8 to 10 weeks delivery, Gauteng,

R 1.5m, subject to the rand/dollar exchange rate. A suitable stand can be supplied at an additional cost of R150k. Attached is a photograph of a recently sold unit

DAC348 Used but in good condition, Head and Mainshaft, suitable for a 5½ ft Symons Cone Crusher, standard head, Gauteng. R150k DAC350 4¼ ft Symons Cone Crusher, short head, working condition, extra head, Free State. R367 000

DAC351 2 Off Telsmith 48" Cone Crushers, price excludes lube systems and electric motors. 1Off C-Style refurbished with a few components still missing. 1 Off D-Style still running. Cape Town area, R750k for both machines DAC352 5½ ft Symons Cone Crusher components. One of each, new components: Bowl liner - fine, bowl liner - medium, mantle shaft without liner, bevel gear, feed core liner, excentric with inner excentric bushing, main shaft sleeve, counter shaft assembly without sheeve, main shaft nut, feed plate, bevel gear - solid, adjustment cap, feed plate, feed plate - short head, feed adjusting post - short head, adjusting nut - standard head. Two of each, new components: Bevel gear, socket liners - brass. Three of new head sealing ring. Excentric shaft with a new bevel gear - press fit arrangement. Main shaft nut - rebuilt. One of each, good used components: bowl with liner and nut, mantle liner, counter shaft with gear without housing, rim protection. Lot of pulleys (8) for cones 5½' and 4'. Lot (4) main frame pin and spacers. Set of pulleys - motor & cone. FOB Canada. CND $246,505 Prices for individual items are available on request DAC354 7 ft Symons Cone Crusher. It stopped crushing about 1 and a half years ago. Top is heavy duty and bottom extra heavy duty. S/N E716, 5" to 6" feed size, 2" product size, material crushed: Limestone, rate: 300 to 400 tph. 145,000 Euros ex Dublin including dismantling, packing and prepare for shipping DAC355 Telesmith 36D Cone Crusher, good operating condition, includes lubrication system with tank and electric motor, installed manganese ±75%. Frame, seals, bushings, and springs in good condition. $48,750 Fob USA DAC356 Telesmith 489 Standard Cone Crusher, $48,750 Fob USA. Can accept a 10" rock and be set to 1" discharge. Can be used as the only crusher for processing a sand and gravel deposit. Can make 300 tons per hour of three products of 1½" minus material, using the cone and two screens. Add a 27 X 48 jaw crusher to the circuit and make 400 tons per hour. Crusher is in good operating condition, has been well maintained. Very good threads, tight, good seals, manganese ±80% plus, pulley turns easily and smoothly, and good bearings and bushings. Can place into a container. Can package it with a jaw crusher and screens. Electrical control panel and soft start package available.

DAC360 Reconditioned Stand, heavy duty, suitable for a 3 ft Symons Gyro Crusher, Gauteng. R40k DAC362 Reconditioned 4 ft Symons Cone crusher, standard head,with lube system and electric motor, Gauteng. R1.15m DAC363 Reconditioned 3 ft Symons Cone Crusher, standard head, with lube system and electric motor, Gauteng, R895k. Components available to convert to short head on request DAC369 Reconditioned Symons 36" Gyradisc Eccentric complete with inner bronze bush, Gauteng. R85 965 DAC370 New 3ft Symons Cone Crusher, short head, with lube system and electric motor, 8 weeks delivery. R890k DAC357 Refurbished Symons 2 ft Standard Cone Crusher complete with lube system and electric motor, Gauteng. R450k DAC358 Refurbished Symons 3 ft Cone Crusher, standard head' with lube system and electric motor, Gauteng. R875 000 DAC359 Reconditioned Head and Main Shaft, suitable for a Symons 5½ ft Short head Cone Crusher. Reconditioned 6/98 at a cost of $6,500. $35,000 FOB (USA)

DAC364 48" Symons Gyra Disc Components, Gauteg. Main Frame, R120k. 3 Off Coutershaft Boxes complete with new pinions, R75k each. 2 Off Eccentrics complete with new bevel gears and brass bushes, R80k each. 2 Off Adjustment Bowl, R45k each. Special discount available to total purchase DAC368 Stripped 36" Symons Gyradisc Cone Crusher, Gauteng. R200 000 DAC374 New 3 ft Symons Cone Crusher, Standard head, c/w lubrication system, electric motor and controls, Gauteng. R880 000

DAC375 1972 Nordberg 4¼ ft Symons Cone Crusher, shorthead, complete with hydraulic clamping and adjustment. Diesel motor and belt driven. The crusher is installed on a tandem axle chassis with an under crusher hopper and rock ledge, cone rock box feed hopper with over flow chute, four ground support stands and pads and a fold down catwalk and access ladder. Crusher is reported as an excellent running machine and has been test run since it was taken out of service. $158,750 FOB USA DAC376 4¼ ft Symons Cone Crusher, shorthead, Serial # 40012, excellent running condition. Water seal style, Duckworth clamping, cast style main frame. Fully rebuilt head and shaft assembly (with new shaft). New locking nut and cover and socket liner. New spare mantle included: 4830-0158 and new spare bowl liner included: 5013-4801. Very low hours since repair work was completed. Complete with lubrication system and 575 volt electrics. Crusher is presently installed on a chassis, the chassis is not included in the price. $75,500 FOB USA DAC377 2 Off Nordberg 3 ft Gyradisk Cone Crushers, bare cones (no motors, elect. or oil pumps), manual adjustment, manual clamping, very good condition, ready to work, cleaning and loading onto trucks. $45,000 each FOB USA DAC378 Symons 3 ft Cone Crusher, shorthead, 100hp/550V/3Ph/60Hz electric motor, lubrication system available, but may not be salvaged and Is not Included in price, 60 to 70% life remaining on current wear parts. Unit remains intact, indoors and in very good condition, price includes disassembly/removal/cleaning/loading onto truck. $69,950 FOB USA DAC379 4 Off New Stepped Mantle Liners, suitable for a 4¼ ft Symons cone crushers, standard head, Gauteng. R14 500 each

DAC381 New Support Bowls, suitable for a 4¼ ft Symons Cone Crusher, standard head, 8 to 10 weeks delivery, Gauteng. R130 000 each DAC382 3 Off New Heads and Shafts, suitable for a 4¼ ft Symons Cone Crusher, standard head, Gauteng. R130 000 each DAC384 2 Off BS 1350 Morgardshammar Gyratory Crushers, approximate opening feed 54" x 128", Sweden. USD$1 430 000 each

DAC390 Telsmith 24" Cone Crusher, standard head, complete with stand, pump, electric motor, safety guard and tank, very good condition, Cape Town area. R310 000

DAC387 New 2' Symons Cone Crusher, standard head, complete with lube system, electric motor and controls, 8 to 10 weeks delivery, Gauteng. R440 000 DAC386 Telsmith 18" Intercone Cone Crusher, complete with 22 kW electric motor and lubrication system, fully rebuilt, Gauteng, R290 000. Attached is a photograph of a unit recently sold DAC388 3 ft Symonds Cone Crusher, short head, new head, excellent condition, price includes lube system but excludes electric motor, Welkom area. R441 000

DAC393 Reconditioned Symons 3 ft Cone Crusher, standard head, with lube system and electric motor, Gauteng. R895 000 DAC396 New Hydrocone Crusher, similar to the Nordberg HP300 Cone Crushers, with electric motor, lube system and hydraulic pack, Gauteng. R 1.9m Current population in RSA is 6 units operating DAC392 36 " Telsmith Gyrasphere Crusher, standard head, comes with lube system, electric motor and stand,Gauteng. R450 000 DAC397 New 4¼' Symons Cone Crushers, hydraulically assisted, standard and short head, c/w lube systems, electric motors, and starter panels, Gauteng. R1.34m each

DAC398 Reconditioned 36" Telsmith Gyro Crusher, excluding lube system and electric motor, R800 000. Or with stand, lube system, electric motor and stater panel, R1.25m. Delivery not specified, Gauteng DAC399 Telsmith 36" C-style Cone Crusher, complete with stand, lube system and electric motor, 3 weeks delivery, Cape Town area. R800 000 DAC394 New 3ft Symons Cone Crusher (Chinese replica),short head, with lube system electric motor and stater panel, Gauteng. R580 000 DAC395 Telsmith 36 'D' Mainframe complete with springs, segments & new mainframe bush, Gauteng. R325 000 DAC403 Nordberg HP400 (7 ft) Cone Crusher, 2000 model, self-contained, less than 500 000 tons of use, 60 HZ electric motor, equipped with soft start, ready to work, USA. USD$ 335,000

DAC404 Telsmith 48S C-style Cone Crusher, fully refurbished by Osborn and never installed, price excludes electric motor, lube system and stand, Cape Town area. R990 000 DAC405 2 Off 5½ ft Symons Cone Crushers, in good order with spares, Gauteng. R950 000 each

DAC406 New 3 ft Symons Cone Crusher, standard head, manual adjustment and manual locking, price includes lubrication system and 75 kW electric motor, 12 month warranty on all workmanship, 12 to 16 weeks delivery, Gauteng, R900 000. A stand can be supplied at an additional cost DAC408 Reconditioned 48" Symons Cone Crusher, gyro disc, c/w electric motor and lubrication system, 3 to 4 weeks delivery, Gauteng. R1.115m DAC407 48" Symons Cone Crusher, gyro disc, currently stripped, the unit can be assembled and supplied in an excellent running condition in 6 to 8 weeks, Gauteng, R1.25m. The price excludes an electric motor and lubrication can be supplied at an additional cost DAC409 Support Bowl, with liner, suitable for a Telsmith 36 FC cone crusher, C-style, Cape Town area. R60 000 DAC410 3 ft Symons Cone Crusher, shorthead, complete with lube system, 400 Volt - 50 Hz electric motor and stand, Vilhelmina Sweden. Euro 34.000

DAC411 Reconditioned 7 ft Symons Nordberg Cone Crusher, CR3003, heavy duty, short head, S/N 730, with coarse bowl. Unit has hydraulic clamping, clearing and adjustment. Complete with lubrication system and hydraulic power pack. Power is provided by a 220 kW, 380 Volt, 50 Hz, 740 rpm drive motor. Vilhelmina, Sweden. USD$285,000 DAC412 7 ft Symons Nordberg Cone Crusher, CR3004, heavy duty, short head, S/N 767, with coarse bowl. Good used condition, Unit has hydraulic clamping, clearing and adjustment. Complete with lubrication system and hydraulic power pack. Power is provided by a 220 kW, 380 Volt, 50 Hz, 740 rpm drive motor. Vilhelmina, Sweden. USD$250,000 DAC413 2 Off 7 ft Symons Nordberg Cone Crushers, CR3005, heavy duty, short head, S/N 743 757, with coarse bowl. Good used condition, Unit has hydraulic clamping, clearing and adjustment. Complete with lubrication system and hydraulic power pack. Power is provided by a 220 kW, 380 Volt, 50 Hz, 740 rpm drive motor. Vilhelmina, Sweden. USD$240,000 each

DAC415 New 2 ft Symons Cone Crusher, shorthead, complete with lube system, electric motor and controls, 12 to 14 weeks delivery, Gauteng. R440 000 DAC414 Refurbished Nordberg HP 400 Cone Crusher, with lube system and hydraulic settings. New gears, bushings and main shaft. Price excludes liners/mantel due to crushing requirements being unknown and excludes electric motor. 2 weeks delivery, Sweden. ZAR1.9m DAC416 Telsmith 36" D-style Cone Crusher, when stripped for inspection and repairs, it was established that all the components condition. The crusher is being assembled and tested. Price includes a 75 kW - 380 Volt electric motor and a lubrication system consisting of a tank, pump, electric motor and pressure protection switch, Gauteng. R550 000

Jaw Crushers available www.tradepost.co.za DAJ132 14 x 24 Telsmith jaw crusher, fully refurbished, 6 months warranty, 3 weeks delivery, Cape Town. R400 000

DAJ184 New 30 X 42 Du Ling Watson Jaw Crusher, spare parts available in the country, Gauteng. R 950 000.00 DAJ185 42 x 30 (30 X 42) Hadfield Jaw Crusher, single toggle, to be refurbished, Gauteng. R 1.1m DAJ041 10 x 16 Telsmith Jaw Crusher, fully rebuilt, Gauteng. R 165k or R 215k with stand and motor DAJ248 Reconditioned 25 X 36 Telsmith Jaw Crusher, single toggle, roller bearings, 2 weeks delivery, Gauteng. R950 000 DAJ299 Main Frame suitable for a 25 x 36 Telsmith Jaw Crusher, single toggle, C-style, Gauteng. R 355 000

DAJ318 2 Off 12 x 7 Hadfield Jaw Crushers, single toggle. Sold as good runner, R 60k each or reconditioned, R 130k each. Gauteng DAJ326 2 Off Reconditioned 20 x 10 Hadfield Jaw Crushers, single toggle, 4 weeks delivery, Gauteng. R 220 000 each DAJ328 Reconditioned 30 x 20 Hadfield Jaw Crusher, single toggle, Gauteng. R650 000

DAJ329 18 x 32 Telsmith Jaw Crusher, single toggle, complete with new liners and cheek plates, ready to work, North West Province. R420 000 DAJ341 Reconditioned 14 x 24 Telsmith Jaw Crusher, 4 to 5 weeks delivery, R440 000. Or complete with stand, electric motor, v-belts, guards, chute and starter panel included, R550 000. Gauteng DAJ345 Reconditioned 10 x 21 Telsmith Jaw crusher, skid base, electric motor, v-belts and belt guard, 2 to 4 weeks delivery, Gauteng. R 225 000

DAJ359 Reconditioned 25 x 36 Telsmith Jaw Crusher, single toggle, complete with electric motor, 4 to 5 weeks delivery, Gauteng. R1.295m DAJ360 Reconditioned 18 x 32 Tesmith Jaw Crusher, STRB, 5 weeks delivery, 3 month warranty, Cape Town. R670 000 DAJ372 Reconditioned 10 x 21 Telsmith Jaw crusher, Gauteng. R 200k DAJ376 New 3 x 5 Lab Jaw Crusher, complete with feed chute, guard, discharge pan, stand and electric motor, Locally manufactured, Gauteng. R 35k

DAJ348 25 x 26 Metso VB93 Jaw Crusher, STRB, good condition, new cheek plates and liners, Gauteng. R680 000 DAJ354 42 x 30 Hadfield Jaw Crusher, STRB, Gauteng. "As is", R280k or refurbished, R977 500 DAJ357 Reconditioned 30 x 20 Hadfield Jaw Crusher, single toggle, skid mounted, complete with electric motor, V-belts and guards, Gauteng, R648k. Over band magnet for a 1050 belt complete with rectifier available at an additional cost of R11 0000

DAJ363 Nordberg C80 Jaw Crusher (32 x 20), with motor and starter panel, Gauteng, R650 000. A stand can be supplied at an additional cost DAJ364 Reconditioned 42 x 32 Hatfield Jaw crusher, double toggle, spare swingjaw en liner, Gauteng. R1.356m DAJ365 2000 Metso C105 (28x42) STRB Jaw Crusher, hydraulic setting, fully refurbished, 6 month warranty, 5 weeks delivery, Cape Town area. R1.2m

DAJ366 12 x 7 Hadfield Jaw Crusher, Gauteng. R70 000 DAJ367 2 Off New 10 x 16 Sanland Jaw Crushers, single toggle, with electric motor, slide rails and V-belts, Gauteng, R128 000 each. A skidframe can be supplied at an additional cost of R35 000 DAJ368 Reconditioned 14 X 24 Telsmith Jaw Crusher, single Toggle, Cape Town. R450 000

DAJ369 3 Off New 150 x 250 Sanayo Jaw Crushers, without stand or electric motors, Port Elizabeth. R45 000 each DAJ370 New 10 x 16 Jaw Crushers, Terex style c/w electric motors, 8 to 10 weeks delivery, Gauteng. R110 000 each DAJ371 New 14 x 24 Jaw Crushers, Terex style c/w electric motors, 8 to 10 weeks delivery, Johannesburg. R220 000 each

DAJ384 New Fixed Jaw, suitable for a 30 x 42 Hadfields Crusher, ribbed, 18%, Gauteng. R43 160 DAJ382 Fixed Jaw, suitable for a Hadfields Crusher, AH 30 x 42B, 702B, deep tooth 8H, never been used, Gauteng. R44 800

DAJ373 25 x 36 Telsmith Jaw Crusher, single toggle, stripped condition, components in excellent condition. Outer bearing, labyrinth seals en Bearing caps are missing. These can be renewed at an estimated cost of R120k. Gauteng. R367k as is DAJ383 Reconditioned Allis Chalmers 13 x 24 Jaw Crusher, single toggle, new bearings, shaft and labyrinth seals, flat jaws 90%, Gauteng. R328 000

DAJ385 23 x 30 Hadfield Jaw Crushers. 1 Off single toggle and 1 off double toggle, Gauteng. R315k each DAJ389 14 x 24 Telsmith Jaw crusher, Gauteng. R252 000 DAJ390 Pex 30 x 23 Jaw crusher, double toggle, never been used since new, Mpumalanga. R650 000

DAJ392 30 x 42 Osborn Jaw Crusher, single toggle, bearings and bearing caps missing, NDT certificate available, Gauteng. R400 000 DAJ393 Birdsborough-Buchanan 48 x 60 Jaw Crusher, double toggle, 4 piece frame, Farval lube system, 200 hp - 2 200 Volt - 3 Phase - 60 Hz - 705 rpm electric motor, unit remains intact and in very good to excellent condition. Price includes match-marking, removal, cleaning, sandblasting, painting and loading onto trucks. USA Dollars $195,000.00 F.O.B. Ex-Site Canada. An abundance of spare parts are available at an additional cost DAJ394 Kobe Steel Allis Chalmers 42 x 54 S-T Jaw Crusher, S/N 11-0793. Fabricated steel main frame - very good condition. Stationary jaw plate, corrugated 52" wide, 30% worn. Cheek plates and side liners in good condition. Fabricated swing jaw in very good condition. Swing jaw plates 51" wide, 30% worn. Flywheel in good condition. No lube system. Shinko electric motor, 2.3 tons, 150 kW, 50 HZ, 735 rpm - Primary volts 3000, secondary volts 385, primary ampere 38, secondary ampere 238. USD $380,000.00 FOB Philippines

DAJ398 30 x 20 Hadfield Jaw Crusher, single toggle, sold as is, needs to be refurbished, Gauteng. R200 000 DAJ399 Reconditioned 18 X 32 Telsmith Jaw Crusher, short frame, STRB, Gauteng. R700 000 DAJ395 New 500 x 750 (20 x 30) Terex Style Jaw Crusher, with electric motor, ex stock, Gauteng. R400 000 DAJ403 Reconditioned 14 X 24 Telsmith Jaw Crusher, with stand, electric motor and stater panel, Gauteng. R980 000

DAJ397 32 x 20 Nordberg Jaw Crusher, signle toggle, with electric motor, excellent condition, Gauteng. Price: R 575 000 DAJ400 80 x 60 Telsmith Jaw Crusher, with electric motor and lube system, liners in very good condition (80% and better), Gauteng. R3.6m DAJ401 25 x 36 Hatfield Jaw Crusher, double toggle, becomes available middle March 2012, Gauteng. R600 000

DAJ402 16 x 9 Pegson Telsmith Jaw Crusher, unit will be rebuilt and supplied in excellent running order, 4 weeks delivery, Gauteng. R170 000 DAJ404 New Telsmith T 14 x 24 Jaw Crusher. Max feed size: 300 mm. Minimum closed size setting: 30 mm at approx 12 to 14 tph. Gauteng, R485 000 DAJ407 20 x 36 Telsmith Jaw Crusher, reconditioned 3 month ago, price includes the electric motor, Gauteng. R400 000

DAJ408 24 x 36 Telsmith Jaw Crusher, STRB, good working condition, Mpumalanga. R480 000 DAJ409 60 x 40 cm Svedala-Arbrå (Sandvik) Jaw Crusher, 2 m wide 1.8 m high and 3 m long, with overhauled electric motor and steel frame, Vilhelmina Sweden. Euro 20,000 DAJ410 2 Off 10 x 21 Telsmith Jaw Crushers, STRB, both in working condition - replaced to upgrade the plant, Kimberley area. R250 000 each

DAJ411 24 x 15 Hadfield Jaw crusher components. Unused fix and swing jaws,new side plates, tension rod, seats, Western Cape. R35 000 total DAJ412 Reconditioned 10 x 21 Telsmith Jaw Crusher, Western Cape. R250 000 DAJ413 14 x 24 Telsmith Jaw Crusher, on chassis,with motor and feeder bin, Western Cape. R450 000

DAJ414 Reconditioned 8 x 12 Telsmith Jaw crusher, new bearings wear parts etc, Gauteng. R137 000

Impact Crushers available www.tradepost.co.za DAK316 New replacement Wear Components for all known name Horizontal and Verticle Impact Crushers, Gauteng. POR

DAK326 Reconditioned Hazemag APKE 0806 Impact Crusher, with 45 kW electric motor, no stand, 4 weeks delivery, Gauteng. R300 000 DAK314 24 x 20 Mud Hog Impact Crusher, 35 tph clay crusher, suitable for brick manufacturing, Gauteng. R 300k DAK320 Pilot Crushtec TM0605 Rubble buster, with feed conveyor, diesel driven, mounted on a 4 wheel draw bar trailer, Cape Town. R450 000 DAK327 Refurbished Krupp APSE1010 Impact Crusher, stand and electric motor can be supplied at an additional cost, 4 to 5 weeks delivery, Gauteng. R550 000

DAK328 Reconditioned Hazemag APKM0805 Impact Crusher, with stand and electric motor, 3 weeks delivery, Gauteng. R350 000 Refer photographs of previous unit sold DAK329 Sandvik CI221 Impact Crusher, Gauteng. R460k DAK335 New Hazemag APS-1006 Impact Crusher, 60 tph capacity, c/w 95 kW electric motor, centralized greasing system and hand pump, Steinert SQ 800 metal detector, Gauteng. R850 875

DAK336 Pilot Crushtec Vertical Impact Crusher, 160 kW electric motor, Gauteng area. R225 000 DAK337 SBM Mill 1310-4, similar to a Hazemag 1310, 150 to 300 tph capacity, hydraulic drive, excellent condition, all maintenance and installation manuals available, Rustenburg area. R400 000 DAK339 Fully refurbished 2010 Pilot Crushtec AC208 VSI Crusher, 160 kW electric motor, Gauteng. R575 000

DAK338 2 Off New Hazemag 1010 Impact Crushers, Gauteng. R680 000 each DAK340 Pilot Crushtec Rubble Buster, 1 160 hrs, it had just been overhauled by OEM, price includes spares and 2 sets of hammers, Gauteng. R685 000

Mobile & Semi-Mobile Crushers available www.tradepost.co.za DAM836 2 Off Osborn Trackmounted 30 x 42 Mobile Crushing Plants, Gauteng. No 1 - Refurbished, complete with hydraulic pecker and self cleaning magnet, R 2.8m. No 2 as is, R 2.19m, or refurbished, 5 weeks delivery, R 2.6m. DAM837 2005 Metso LT1213s Horizontal Impactor, 250 tph, Cat engine, 5100 hrs, built in single deck screen and recirculating conveyor, Cape Town area. R 3m DAM840 Mobile Jaw Crusher, reconditioned Hadfield 36 x 25 (25 x 36), single toggle, roller bearing, refurbished Telsmith 3 ft x14 ft step deck VGF, feed hopper to suit a Bell B20 Dump Truck, mounted on a new double axle trailer and repaired as necessary bogie, with operator platform, access stairs and guards, 4 weeks delivery, Cape Town area. R1.4m

DAM841 Mobile Jaw Crusher, Telsmith 18 x 32 Jaw Crusher, with liners 85%, 55 kW electric motor, mounted on a trailer with 6 to 8 m³ receiving bin, 1m x 4 m feeder, 750 mm x 11 m discharge conveyor, no switchgear available, total weight ±24 ton, R 850k as is. Cleaned up and supply switchgear, R1.0m. Gauteng DAM843 Skid Mounted 3 ft Cone Crusher, comprising of 3 ft STD Pilot Crushtec Cone Crusher, 75 kW, 380 V crusher motor, skid, lube system, hydraulic adjustment and control station, discharge chute, discharge conveyor, this equipment has only run for one month only and is in excellent condition, Gauteng, R1.5m. A generator set and electrical panel are also available at an additional cost. DAM847 2007 Osborn Telsmit 30 x 42 Mobile Jaw Crusher, 1 900 hrs, Postmasburg area. R 2.85m

DAM873 Track mounted Metso HP300 Cone Crusher comprising off: New Track mounted chassis to suit a Metso HP300 cone crusher, new Volvo Genset, new switch gear and cabling, new belt feeder, all electric motors, pulleys v-belts and safety guards ready to operate, fully refurbished 1993 Metso HP 300 STD crusher, new 200 kW electric motor, 10 weeks delivery, Cape Town area. R3.3m

DAM848 Hazemag APK 1010 Impact Crusher, mounted on a mobile chassis with double axle bogey, electric motor, feeder, feed hopper. Chassis equipped with hydraulic jacking legs and power pack for jacking, Cape Town area. R450 000 DAM856 2007 Pilot Crushtec, Twister Track, mobile crusher, hrs unknown refurbished Barmac 900 Impact Crusher, 6 cyl Caterpillar engine, Gauteng. R1.1m DAM859 Symons 4¼ ft Std Mobile Cone Crusher. Mounted on Tri-Axle Chassis, Highway Trailer. Trailer is Roadworthy with Good Tires, Lighting and Brakes. Includes All Necessary Electrical Switchgear. Crusher Lubrication System. Rear and Side Discharge Conveyors. Operational Lighting. Safety Guards & Railings. Push Button Control Station. Hydraulic Levelling Jacks. Well maintained and in very good operating condition, ready to go to work. F.OB. Ex Site, USA. Canadian Dollars $199,900

DAM862 Nordberg LT105 Mobile Jaw Crusher, 5 267 hrs, good working condition, Kimberley area. R790 000 DAM864 2006 Terex Pegson Mobile Crusher, 1100 x 800 jaw crusher, 3 000 hrs, good working condition, Gauteng. R1.8m DAM867 Metso LT80 Mobile Crusher, 20 x 32 jaw crusher, Deutz Engine with ±7 000 hrs, comes with VGF feeder, side conveyor and magnet belt, Cape Town area. R800k

DAM868 Refurbished 2010 Pilot Crushtec Twister Track, Mobile Crusher, 2 887 hrs, newly painted, new engine fitted, 3 Month warranty 2 to 3 days delivery, Gauteng. R2.2m DAM869 2005 Pilot Crushtec Twister Track, Mobile Crusher, 1 072 hrs, demo machine, Gauteng. R2.0m DAM870 Pilot Crushtec Twister Track, Mobile Crusher, good running machine, new 3 port rotor, Gauteng. R1.050m

DAM871 Newly manufactured Track Mounted Oremaster Mark 3 VSI Crushers. Feed Hopper with a 6m 1050mm incline belt feeder which retracts for transport and servicing of VSI. Discharge conveyor, 10 m x 1050 mm which folds hydraulically for transport. Genset, Volvo TAD1641GE 450 kVA water cooled 6 cylinder engine. Full electronic distribution board. 300 tph Capacity, 50 mm maximum feed size, estimated 55L/hour diesel consumption, 12 Weeks delivery, Cape Town. Transport dimensions. Width: 3 300 mm. Height; 3 800 mm. Length: 17 000 mm. Weight: 40 000 kg. R3.0m each DAM872 2010 Metso LT1100 Mobile Jaw Crusher, Caterpillar engine, 2 100 hrs, ex import, R5.9m, landed in Port Elizabeth DAM874 Terex Finlay J1175 Mobile Jaw Crusher, 4 500 hrs, Caterpillar engine, good running condition, Gauteng. R1.85m

DAM876 Track mounted Metso C105 Jaw Crusher comprising off: New Track mounted chassis to suit a Metso C105 Jaw Crusher, new Volvo Genset, new switch gear and cabling, new hopper with hydraulically folding bin for transport, operator platform and all access stairs, new VGF with mechanical vibrating unit, all electric motors, pulleys v-belts and safety guards ready to operate, fully refurbished Metso C105 (28 x42) STRB jaw crusher, 10 weeks delivery, Cape Town area. R3.1m DAM877 2007 Terex Pegson 600 x 900 Metrotrack, 3 800 hrs, Cape Town area. R1.6m DAM878 Maxtrack 1000 Mobile Cone Crusher, 3 500 hrs, needs a new CPU unit (approx R40 000) and a pre-delivery service. Gauteng. R2.2m DAM879 Pegson 900 x 600 Mobile Jaw Crusher, 3 500 hrs, jaw liners and the main discharge belt need to be replaced, Gauteng. R1.0m

DAM880 Metso Locotrac LT95 Mobile Jaw Crusher, Cummins engine, Nordberg C95 Jaw Crusher (37"x23"), 3 222 operating hours, 12.54 m long, 2.5 m wide, 3.1 m high, mass - 27 ton, immediately available, Kimberley area. R1.95m DAM881 Symons 3 ft Standard Cone Crusher on a skid frame complete with lubrication system, motor and electrical panel, R1.0m. Estimate price for a suitable genset, R250 000. Total amount, R1. 25m. Gauteng

Roller Crushers available

DAR095 New Mineral Sizers, various applications and sizes. POR

www.tradepost.co.za

DAR280 New imported Gundlach Roller Crushers and Mclanahan Roller Crushers. Prices and delivery on request DAR276 MMD 500 Mineral Sizer, complete with segments and 132 kW electric motor, Gauteng. R650k DAR282 New Mineral Sizers, designed and manufactured to suit customer specifications, UK. Prices and availabilities on request DAR283 New ALP 1150 Series Mineral Sizer, complete with twin gearbox drive, fluid coupling and electric motors, ideal for coal operation, in feed: 1.2 m, out feed: 300 mm, capacity: 4 000 tph, manufactured in China with Uk technology. USD$825 000.00

DAR284 New ALP 500 Series Mineral Sizer, 2 000 mm working throat, complete with 160 kW gearbox, fluid coupling and electric motor, manufactured in China with Uk technology. USD$115 000.00

Granulators / Pulverisers / Hammer Mills available www.tradepost.co.za DAS191 New 48 x 12 Hadfield Ganulator, 250 mm feedsize, 12 mm (15 tph) to 75 mm (120 tph) product size, without electric motor, 3 months delivery, Gauteng. R850k

DAS200 Refurbished H4818 Swingstock assembly, suitable for a 48 x 18 Hadfield Granulator, consistng of swingstock, new shaft, new bearings and new labyrinth seals, without flywheel and pulley, 20 working days delivery, Gauteng. R 500 000 DAS204 2 x Pex 150 x 750 (6 x 30) Duling Watson Granulators, Guateng. R 150 000.00 each DAS112 1 020 x 1 550 Pulveriser complete met chain feed, Johannesburg. R250 000. DAS205 Heavy Duty Miag Braunschweg Hammer Mill, mouth opening 240 mm wide x 410 mm long. Hammer size 160 mm long x 80 mm wide x 20 mm thick, 6 sets of 6 hammers, Gauteng. R 46 000

DAS206 New 48 x 18 (18 x 48) Hadfield Granulator, complete with fly-wheel, electric motor and V-belts, 3 months delivery, Gauteng. R1.365m DAS209 Granulator, 3 Blade, 230 mm x 230 mm, 3 rotation blades ­ 2 static, 5,5 kW , 955 RPM, Gauteng. R 48K DAS298 Alpine (Augsburg) Granulator, type RO/16/148, feed hopper 920 x 430, throat 175 x 140, blades 170, 3 x moving and 2 x static blades, 800 mm outlet to floor, Gauteng. R 40k DAS321 Refurbished 10 x 36 Pegson Granulator, new liners, Gauteng. R286 000

DAS299 PEX 300 X 1300 ( 52X12) Granulator, refurbished with 1 year warranty, 75 kW electric motor and V-belts, Max feed: 250mm, closed size settings: 20 to 90 mm, capacity: 20 to 90 tph, ex stock, Gauteng. R 440k DAS302 Hadfield 48 X 12 Ganulator, as is R 200k or fully reconditioned with new shaft, bearings, lab seals and warranty, R 595 000 Middelburg area DAS309 New Granulators imported from China, compllete with electric motor and V-belts, Gauteng. Backed-up by a RSA crusher dealer, sold in excess fo 300 units locally, all popular sizes available, 8 weeks delivery, POR. 150 x 750 mm Granulator (6"x30"), R 127 953. 250 x 1200 mm Granulator (10"x48"), R 278 678 DAS314 New 10 x 48 Granulator c/w electric motor, 8 weeks delivery, Gauteng. R307 890

DAS310 42 x 12 Hadfield Granulator, very good condition, Gauteng. R630 000 DAS312 2 Of New 10 x 30 Terex Style Granulator, with electric motor, Gauteng. R235 000 each DAS316 Drotsky M36A Hammer Mill, without electric motor, Gauteng. R26 250

DAS318 30 X10 Hadfield Granulator, with electric motor and stand, Gauteng. R340 000 DAS319 Lump Breaker, no electric motor (30 kW) or hopper, suitable for a coal or clay application, 300 mm feed size, Gauteng. R110 000 DAS320 Hammer Mill, make unknown, Excellent condition, Brits area. R26 250

DAS322 2 off New 0207 Terex Style Granulators, Gauteng. R234 000 each

Crushing Plants available www.tradepost.co.za DAT162 Complete Crushing Plants can be put together, to comply with customer specifications, utilizing reconditioned equipment or reconditioning used equipment, to reduce cost. In order to compile a budget price, the following information would be required: 1 Material or product to be crushed 2 Feed size, maximum size of the material that will be fed into the crushing plant 3 Feed rate, tons per hour / day 4 Product size, final crushing sizes required

DAT163 Complete crushing plant to produce 19mm, 13mm, 6mm crusher stone and crusher dust at roughly 120 tph. Telsmith 2536 STRB Jaw crusher mounted on a static frame complete, VGF feeder, Telsmith 48" C style Std refurbished, .Telsmith 4x12 double Deck screen fully refurbished, 5 x18 m conveyor 600 mm wide, 1 x 30 m conveyor 750mm wide, Telsmith 5 x 16 triple Deck screen fully refurbished, feedbin, operator platforms, catwalks, chutes and electric motors & gearboxes. 6 Month warranty on all workmanship. 10 to 12 weeks delivery. 50% Deposit with order, Cape Town. R 4.6m budget price DAT167 Complete crushing plant to produce 19mm, 13mm, 6mm crusher stone and crusher dust at roughly 50 tph. Feed size is -450 mm. Telsmith 18x32 STRB crusher refurbished mounted on a mobile frame complete with feed hopper, operator platform. Telsmith Single deck VGF, refurbished with all electric motors and safety guards, ready to operate. Symons 3ft Std Gyro or similar with motor , oil pump, oil tank , filter and gauges, also includes new stand. Telsmith 5 x 16 Triple Deck screen refurbished on stand complete with all catwalks, access stairs, safety guards and electric motor. Barmac Mark II VSI fully refurbished mounted on a stand with 110kw motor and new 4 port rotor. New 24m conveyor of lattice construction 750mm wide with shaft mounted gear box, electric motor and stand. 5 x New 13m conveyor of lattice construction 600mm wide with shaft mounted gear box, electric motor and stand. New switchgear to suit above plant. Budget R 3.463m DAT169 New Crushing Plant, suitable for 50 tph dolomite, -300 mm feedsize, -9.5 mm and crusher dust, consisting off: Primary Crushing Section c/w bin, modular structure, chutes, vibrating grizzly Feeder 600 x 2500 mm, Shanbao Jaw Crusher 16" x 24" (400 x 600) and Sacrificial Conveyor, R576k. Secondary Crushing Section c/w feed conveyor, scalping screen 4' x 8' (1 220 x 2 440), 2 off 30" x 6" Granulators, chutes, structure and discharge conveyor, R577 800. Tertiary Section c/w sizing screen, chutes, structure and 2 off stockpile conveyors, R272 600. 10 to 12 Weeks delivery. Gauteng

DAT171 New Crushing Plant, suitable for 50 tph dolomite, -300 mm feedsize, -9.5 mm and crusher dust, consisting off: Feed hopper with liners plates, 600 X 2 500mm vibrating grizzley feeder, 16 X 24 Duling Watson jaw crusher, support structure, 8 m X 600 mm wide conveyor, 4 X 8 double deck screen with walk-way and hand railing, discharge chute and underpan, 12 m X 600 mm conveyor, 3 ft Symons cone crusher, 2 off 12 m X 600 mm stockpile conveyors, 18 m X 600 mm return conveyor, 380 Volt switchgear, 16 to 20 weeks delivery, Gauteng. R2.444m DAT173 20 tph crushing and screening plant, suitable for 3 product sizes, comprising of the following newly fabricated, reconditioned and good used major components: 8 to 10 Cubic Meter Bin on stand. 2 x 6 ft Vibrating Grizzley Feeder on stand mounted under bin. Telsmith 10 x 21 jaw crusher on stand with motor. 15 m x 600 mm Conveyor from jaw crusher to screen. 4 x 8 ft Triple Deck Screen on stand with under pan, chutes, springs, electric motor, screen mesh. Telsmith 24" cone crusher on stand with motor and lubrication system. 10 m x 450 mm Return Conveyor from cone crusher to screen conveyor. 3 Off 10 m x 450 mm Stockpile Conveyors. Electrical switchgear & cables. The maximum input size of rock will be 200 mm due to the jaw crusher opening. 5 to 6 Weeks delivery, Gauteng. R1.6m DAT174 30 to 40 tph crushing and screening plant, skid mounted, suitable for 3 product sizes, comprising of the following newly fabricated, reconditioned and good used major components: 10 Cubic Meter Bin on stand. Vibrating Grizzley Feeder on stand mounted under bin. Telsmith 14 x 24 jaw crusher on stand with motor. 18 m x 600 mm Conveyor from jaw crusher to screen. 4 ft x 12 ft Triple Deck Screen on stand with under pan, chutes, springs, electric motor, screen mesh. Telsmith 24" cone crusher on stand with motor and lubrication system. 10 m Return Conveyor from cone crusher to screen conveyor. 3 Off 10 m x 450 mm Stockpile Conveyors. Electrical switchgear & cables. The maximum input size of rock will be 300 mm due to the jaw crusher opening. 6 to 8 Weeks delivery, Gauteng. R2.145m DAT175 60 to 70 tph crushing and screening plant, skid mounted, suitable for 3 product sizes, comprising of the following newly fabricated, reconditioned and good used major components: 20 Cubic Meter Bin on stand. 3 ft x 12 ft Vibrating Grizzley Feeder on stand mounted under bin. Telsmith 18 x 32 jaw crusher on stand with motor. 30 m x 750 mm Conveyor from jaw crusher to screen. 1.8 x 5.2 m Triple Deck Screen on stand with under pan, chutes, springs, electric motor, screen mesh. Telsmith 36" cone crusher on stand with motor and lubrication system. 20 m Return Conveyor from cone crusher to screen conveyor. 3 Off 15 m x 600 mm Stockpile Conveyors. Electrical switchgear & cables. The maximum input size of rock will be 400 mm due to the jaw crusher opening. 6 to 8 Weeks delivery, Gauteng. R4.055m DAT177 20 tph Crushing and Screening Plant, 3 x product sizes, 200 mm feedsize, consisting of the following; In ­ loading bin with grizzley bars, feed conveyor from bin to crusher, 30 x 12 granulator crusher, feed conveyor from crusher to screen, 5 x 12 triple deck screen, oversize conveyor from screen back to crusher, 3 off stockpile conveyors, switchgear, 150 kW genset (Total plant kW =100) , 6 weeks delivery, Gauteng. R1.485m DAT178 Reconditioned 30 x 20 Hadfield Jaw Crusher, modular constructed complete with 8 m³ feed bin, 750 mm x 2 600 mm Vibrating Grizzley Feeder, sacrificial conveyor , 750 mm wide x 14 m long stockpile conveyor, Mpumalanga. R1.65m DAT181 Manufacture of New Crushing Plant with reconditioned major components, suitable for -325 mm feedsize and ±40 tph, comprising of the following: Telsmith 14 x 24 STRB crusher fully refurbished mounted on frame complete with feed hopper, operator platform, new VGF feeder, with all electric motors and safety guards, ready to operate. Telsmith 24" S gyro crusher refurbished on a stand with motors, catwalk and lube system. Telsmith 4 x 12 triple deck screen fully refurbished on a frame with underpan, discharge chutes and catwalks. 1 x 600 mm wide conveyor and 4 x 450 mm wide conveyors all new. New switchgear and cabling complete to suit above plant. 10 weeks delivery, Cape Town. R1.75m DAT182 Manufacture of New Crushing Plant with reconditioned major components, suitable for -300 mm feedsize and ±40 tph, comprising of the following: 1 Primary Jaw Crusher, Telsmith 14 x 24 jaw crusher fully refurbished on stand with motor and guards R475k. Suitable VGF, bin and stand for the above R300k. 3 to 4 Weeks delivery. Alternatively, Telsmith 20 x 36 D style on stand with VGF, bin and 750 mm discharge conveyor refurbished R1.35m. 4 to 5 weeks delivery. 2 Hadfields 12 x 7 Jaw Crusher fully refurbished on stand with motor and guards R145k. 3 to 4 weeks delivery. 3 Telsmith 24" FC cone crusher on stand with motor and lubrication system R525k. 3 to 4 weeks delivery. 4 New conveyors as required. Refer schedule for conveyor prices. 5 Refurbished 4 x 10 ft Double deck screen on stand with under pan, springs and suitable mesh R250k. 2 to 3 weeks delivery. Alternatively, 5 x 14ft Triple deck screen on stand with under pan, springs and suitable mesh R300k. Gauteng

DAT183 Pilot Crushtec MJ3042 Crushing Plant comprising of heavy duty, single toggle jaw crusher, variable speed vibrating grizzly feeder and skid frame. Limpopo Province. R1.9m DAT184 Complete Crushing Circuit, comprising off: 1) Kue-Ken 36" x 48" Heavy Duty Jaw Crusher, S/N KJ36482071381, double toggle, roller bearings, hydraulic lub system, General Electric 125 hp, 1175 rpm, 575 Volts, 3 phase, 60 Hz, TEFC drive electric motor, very good condition, disassembled, cleaned, painted and is ready for loading, Fob Canada, CAN $113 275. 2) Prefabricated Engineered Grizzly and Chute, 14' high x 14' wide x 14' long, grizzly openings: 10" wide x 17" long, includes wear bar inside chute, unit remains in good condition, ready for shipment Fob Canada, CAN $28 750. 3) Ty-Rock Double Deck Screen, type 900, 78" wide x 16' long, Tamper 25 hp, 1770 rpm, 550V/3/60 electric motor, very good condition, Fob Canada, CAN $69 900. 4) 5125 (4-1/4') Symons Nordberg Standard Portable Cone Crusher, S/N 42064, manufactured in 1977 as a size 5100 and converted in 1982 to size 5125, extra coarse bowl and extra coarse liners, manual adjust and hydraulic clearing, Toshiba 200 hp, 6 pole, 460 Volts, 505UZ frame, 1130 rpm, 1.15 S.F. , 60 Hz, mounted on a 2-axle carrier with new tires and brakes, rear discharge under conveyor, Fob Canada, CAN $155 500. 5) Jeffrey FDR Vibrating Pan Feeder, 4' wide x 10' long, 550 Volt, 3 phase, 60 Hz dual vibrator motors, very good condition, Fob Canada, CAN $43 000. 6) Jeffrey Stephens - Adamson MNF Vibrating Grizzly Feeder, 4' wide x 8' long, 24" x 9" grizzly openings, 550 Volt, 3 phase, 60 Hz dual vibrator motor, very good condition, Fob Canada, CAN $35 000 DAT185 Primary Crushing Sections comprising of 30 X 42 Goodwin Barnsby Jaw Crusher, sinngle toggle, Lined Hopper, 48 X 16 VGF, 900 mm wide x 40 m long stockpile conveyor, retaining wall, supporting steel work, under slung conveyor, Limpopo Province. R1.7m

DAT186 Crushing Plant ±80 tph, comprising off: Telsmith 18 x 32 jaw crusher with VGF feeder and hopper, mounted on a frame. Telsmith 12 x 36 with double deck horizontal screen on mounted on a mobile chassis. Conveyors to suit. 150 kVA Volvo Genset. Switchgear and cabling. Cape Town area, R1.65m DAT187 New Crushing Plant complete with 36 x 10 Pegson Granulator driven by a 55 kW electric motor, feed hopper, 600 mm x 22 m discharge conveyor, support structure with walkway, stater panels and cabling, ready for collection, Gauteng. R450 000 DAT188 Mobile Crushing Plant mounted on two trailers. Trailer 1: Loading bin, vibrating grizzley feeder, 20 x 36 single toggle Osborne jaw crusher, product conveyor and 160 kVA Genset. Trailer2: Double deck screen with chutes and stockpile conveyor. Gauteng. R750 000

DAT193 New Crushing and Screening Equipment, still crated available for inspection in Durban harbor. Please refer the attached Equipment list for details of the equipment included in the price. The footprint sketch attached is an indication of the intended plant, planned to be construct with these components. Also attached are manufactures photographs of the feeder, screen and crushers. USD $ 412,159.24

DAT189 Crushing Plant, 20 to 40 tph, 3 x product sizes, 300 mm optimal feed size, comprising off the following major components. Telsmith 14 x 24 Jaw Crusher with a 600 x 3 000 mm VGF and ±6 m³ bin, all mounted on a common stand, R850k. Telmsith 24" Cone Crusher on stand with lube system and electric motor, R525k. 4 x 10 ft Vibrating Screen, triple deck, wire mesh, with stand and electric motor, R250k. Conveyor belts, chutes, starter panels and electric cables, to suit customer requirements, can be provide at an additional cost. 4 to 6 weeks delivery. Gauteng DAT190 Crushing Plant, suitable for dolerite. Production: 100 tph, with the capacity to increase to 135 tph. Maximum feed size: 175 mm. Product sizes: -40, -28, -20, -14, -10, -6 mm and crusher dust, comprising off: 1) Primary Crushing Section Reconditioned Telsmith 20 x 36D style Jaw Crusher with bin, VGF and 40 m discharge conveyor. The price for complete primary section is R1.550m or R800 000 for the crusher alone. Alternatively, a Nordberg C80 Jaw Crusher with electric motor, excellent running order, R550 000, can be utilized. 2) Secondary Crushing Section - Reconditioned Symons 3ft Cone Crusher, standard head, complete with lubrication system and electric motor, R875 000. 3) Primary Screening section - Newly build 6 x 16 ft Triple deck screen, with stand, electric motor, springs, under pan and chutes, R550 000. 4) Tertiary Crushing Section - Pilot Crushtec AC06 VSI Crusher, good running order, R200 000. 5) Secondary Screening Section - 4 x 10 ft Triple Deck Screen, with stand, under pan, electric motor and chutes, R275 000. Conveyor belts, chutes, starter panels and electric cables, to suit customer requirements, can be provide at an additional cost. 4 to 6 weeks delivery. Gauteng DAT191 Primary Crushing Plant, 80 to 100 tph, 410 mm maximum feed size, comprising off: 1) Reconditioned 30 x 20 Hadfield Jaw Crusher. 2) New 600 x 2500 mm Vibrating Grizzly Feeder. 3) New Stockpile Conveyor, 12 m long. 4) 2 Off 9 m containers. 5) All switchgear and electric cables. Ready for collection, Gauteng, R1.575m

DAT194 Crushing Plant, commissioned in 1996 and operated until 2010 at end of project, comprising off: 1 x Osborn Hadfields 80" x 60" Jaw Crusher (Weight 180Tons. 2 x Osborn Hadfields Apron Feeders 2400 x 16000 Long (Weight +/- 100 Tons). 1 x Osborn Hewitt-Robins 2400 x 5700 Vibrating Grizzly Feeder, stepped deck. 1 x Krupp Stationary Rock Breaker (Pecker) complete with Drive and Base. Mpumalanga. R5.5m total

DAT195 Crushing and Screening Plant, 25 to 65 tph, trailer mounted, comprising off:- 20 x 10 Hadflield Jaw crusher. Trommel Screen suitable for -5 mm, -13 mm, -19 mm and oversize. 4 Off Stockpile Conveyors 600 mm wide x 12 m long. John Deere Front End Loader with 2m³ bucket, year model and hours unknown. Marble Hall, R550 000 total

DAT196 Crushing Plant, ready to work. Comprising off 400 x 600 PEX jaw crusher with 55 kW electric motor, feed bin, pan feeder with Ital Vibras vibrator motors, chutes, structure and 750 mm wide stockpile conveyor, Mpumalanga. R1.89m DAT192 300 tph Primary Crushing Plant, 20 m³ feed bin, 1100 mm x 760 mm Parker jaw crusher, 1.8 x 4 m grizzly feeder, 1.2 m wide x 12 m long stockpile conveyor, 525 Volt mine spec electric motors, weight: 83 tons, Mpumalanga. R1.365m DAT197 18 x 32 Telsmith Jaw Crusher, with skid mounted frame, feed bin, vibrating grizzly feeder, discharge conveyor, complete with all motors, platforms and guards, Heidelberg area. R1.0m

DAT199 Crushing and Screening Plant complete and in good condition, comprising off feed bin, VGF, C 80 Nordberg jaw crusher, 5 x 16 Double deck screen, 5 off 600 mm wide conveyor belts, Gauteng. R677 500

DAT200 18 x 32 Telsmith Jaw Crusher mounted on a 2 axle trailer with 4 m x 1 m feeder, 8 m³ bin and 11 m x 750 mm discharge conveyor, Gauteng. R775 000 DAT201 Reconditioned 10 x 30 Telsmith Granulator (Jaw Crusher), with electric motor, skid stand with walkway, fly wheel guards and vibrating feeder, ready to work, immediately available, Free State. R420 000 DAT202 Complete Coal Crushing Plant, 2 200 tph capacity, plant was in a working order before being dismantled. Price includes the whole plant installation and and excludes the building structure and cladding, the overhead crane and bottom conveyor belt with supporting structure. Major components are as follows: 1) Osborn Hadfields 80x60 Single Toggle Jaw Crusher c/w drive. 2) 2 x Osborn Hadfields Apron Feeders 2400 x 16000 c/w hydraulic gearbox/motor drive. 3) Rock Breaker 3.0 x 6.78 c/w drive, base frame and canopy. 4) Hewitt Robins Eliptex 3.6 x 9.0 single deck feeder c/w VE13 drive unit. 5) All steel gantries, steel hand rails, steel equipment supports (excluding bottom conveyor belt support). 6) Air Compressor (located outside the building). 7) 2 x loose grizzlys. 8) Associated All electrical cables and DB board. 9) Numerous spare components, which includes a 250 kW jaw crusher electric motor, 2 x hydraulic motors and a gearbox. Mpumalanga, R5.8m

DAT204 7 x 12 Cawse and Malcolm Jaw Crusher, new jaw liners, utilized for 4 months only. Complete with 17 kW electric motor, 6 m long conveyor belt, trommel screen with -8 mm apertures, good working condition, Free State. R185 000 DAT205 Mobile Crushing and Screening Plant, 20 to 30 tph, with closed circuit facility, suitable for three product sizes, comprising off the following refurbished components: 1) Feed hopper with plate feeder. 2) 14 x 24 Telsmith jaw crusher. 3) 5 x 24 Telsmith jaw crusher. 4) 3 x 8 Telsmith triple deck vibrating screen. 5) Drum for recirculating load. 6) Three off 450 mm wide product conveyor belts. 7) Switchgear to suit. The plant will be mounted on a double axle bogie with kingpin and will be mobile, except for the three product belts that have to be transported separately. Cape Town area, R900 000 DAT206 Crushing Plant, mounted on a heavy duty steel frame on skids to accommodate the following: 1)New build 1m x 3m VGF with new 2.5 kW, 380 V vibrator motors (8 Springs for mounting and Grizzly bars spaced at 50mm). 5 m³ Receiving bin. Platform mounted on the bin above the jaw crusher with hand railings and stairs up to the platform. Reconditioned Telsmith 14 x 24 jaw crusher with new 37 kW electric motor, v-belts and guards (subject to availability). 4 m x 600 mm Discharge conveyor to take product from VGF and jaw crusher (new 3 kW electric motor with inline gearbox, impact rollers and Lagged drive pulley). R850 000. 2) 10 m x 600 mm Discharge Conveyor. New 3 kW electric motor with inline gear box. Drive pulley lagged. Adjustable leg structure. New rollers, idlers and head and tail pulley. Good used belt fitted. R65 000. 3) Switchgear and cabling for the plant above. New Steel panel. 2 Off new 2.5 kW variable speed controllers for the VGF motors. 2 Off new 3 kW variable speed controllers for the conveyor motors. New 37 kW soft starter for the jaw crusher motor. 3 Off emergency stop buttons (run off the main power feed). Cabling from the steel panel to the motors and stops. R50 000 (assuming the steel panel will be mounted on the steel structure or very close to it). 4) New 100 KVA open genset on a skid frame with fuel tank and panel. R125 000. Total amount, R1.09m. Gauteng. Refer attached photographs of a unit recently sold

ITEMS WANTED

Vibrating screens poly panels wanted www.tradepost.co.za CBA008 Reconditioned or good used 5 x 19 Vibrating Screen, double deck, poly panels, preferably with stand and 380 Volt vibrator motors

CBA009 Reconditioned or good used 5 x 16 ft Vibrating Screen, double deck, poly panels as well as a reconditioned or good used 5 x 5 ft Pan Feeder which is to positioned to extend the discharge of the screen top deck. Both units must come complete with stands and 380 Volt vibrator motors. Required for a project in Lesotho CBA010 Reconditioned or good used 8 x 22 ft Vibrating Screen, single or double deck, poly panels, preferably with 380 Volt vibrator motors, stand and under pan CBA011 Reconditioned or good used 6 x 16 or 8 x 20 ft Vibrating Screen, double deck, poly panels, with stand, under pan and 380 Volt vibrator motors

Vibrating screens wire mesh wanted www.tradepost.co.za CBB004 Reconditioned or good used 4 x 8 Vibrating Screen, single deck, wire mesh, c/w 380 Volt vibrator motors

CBB005 Reconditioned or good used 5 x 16 or 6 x 16 Vibrating Screen, tripple deck, wire mesh, must be Telsmith CBB006 Reconditioned or good used Vibrating Screens, triple deck, wire mesh. 2 Off 6 x 20 or 1 off each 6 x 16 and 6 x 20. Screens must be complete with stands, under pans and electric/vibrator motors, voltage to be advised. Preferably center shaft, Telsmith type, but will also consider other reputable make screens CBB007 Reconditioned or good used Vibrating Screens, ±2 x 3 m, single deck, wire mesh, preferably complete with stand, vibrator motor and underpan CBB008 Reconditioned or good used ±6 x 16 Dabmar or Rotex Vibrating Screen, double deck, wire mesh

CBB009 New or reconditioned 4 x 6 Vibrating Screen, double deck, wire mesh, complete with stand and 380 Volt vibrator motors CBB010 Reconditioned or good used 4 x 12 Vibrating Screen, double deck, wire mesh, without stand, underpan and vibrator motors

Vibrating Pan Feeders wanted www.tradepost.co.za CBF001 Reconditioned or good used Vibrating Pan Feeder or Reciprocating Plate Feeder, suitable to be installed under a stockpile, to feed a conveyor belt @ ±500 tph, -150 mm max feed size

CBF002 Reconditioned or good used Vibrating Pan Feeder, ±900 mm wide x 3 m long, suitable for 80 tph, with 380 Volt vibrator motors

Vibrating grizzly feeders wanted www.tradepost.co.za CBG001 Reconditioned or good used 900 x 4500 mm or 1000 x 4500 mm Vibrating Grizzly Feeder Trommel screens wanted

www.tradepost.co.za

Mobile Screens & Scalpers wanted www.tradepost.co.za CBM806 Good used Cheiftan 1700 Mobile Screen, triple deck screen, machine with low operating hours

CBM808 Reconditioned or good used Finlay 883 Mobile Screen CBM809 Reconditioned or good used Terex Finlay 993 or 994 Mobile Screen CBM810 Reconditioned or good used Terex Finlay 683 Mobile Screen CBM811 Reconditioned or good used Power Screen, Chieftain 600 Mobile Screen, or any other make mobile screen with equivalent screening capacity CBM812 Reconditioned or good used Finlay 683 Mobile Screen CBM813 Reconditioned or good used Powerscreen Warrior 1800

Screens other wanted

CBR018 48" Syncro Sizer Screen Separators and Bag Fillers, similar to photograhs

www.tradepost.co.za

Screen components wanted

CBS019 Lockers R.52 shaker screen gearbox CBS020 Reconditioned or good used Allis Chalmers 4/3 Mechanism

www.tradepost.co.za

CBS021 2 Off Reconditioned or good used Vibrating Mechanism's, suitable for a 6 x 16 Telsmith, triple deck screen CBS022 Reconditioned Allis Chalmers vibrating mechanism Type 4-3 E, required for a customer in Germany

Screening plants wanted www.tradepost.co.za CBT005 Screening Plant suitable for 5 to 10 tph river sand, preferably a skid mounted and a 380 Volt turn-key operation. 200 mm Maximum feed size, -6 mm and -10 mm product sizes, with 2 off stacking conveyors 8 to 10 m long and 3 m high discharge

CBT006 Old type Pilot Mk1 or Mk2 Portable Screening Plant

Cone Crushers wanted www.tradepost.co.za DBC094 Reconditioned or good used 3 ft Symons Cone Crusher, short or standard head, with lube system

DBC095 Reconditioned or good used Main Frame, suitable for a Telsmith 36" D style Cone Crusher DBC096 Reconditioned or good used Metso Nordberg HP300 Cone Crusher, standard or short head DBC097 Reconditioned or good used Telsmith 36" D-style Gyrasphere Cone Crusher DBC098 2 Off reconditioned or good used Metso Nordberg HP500 Cone Crusher, standard or short head DBC099 Reconditioned or good used Metso Nordberg HP400 Cone Crusher, standard or short head DBC100 Reconditioned or good used Telsmith 48S Cone Crusher, preferably with lube system and electric motor DBC101 5½ ft Symons Cone Crusher, shorthead, preferably a good runner, complete with lube system and electric motor DBC102 Reconditioned 36" or 3 ft Cone Crusher, shorthead, must be Telsmith, Symons or Nordberg, complete with lube system, stand, electric motor and starter panel. Required for a project in Mali, operated from a genset, 525 Volt, 50 Hz DBC103 Reconditioned or good used Support Bowl suitable for a Telsmith 36 FC cone crusher, C-style DBC104 Reconditioned or good used 48" Symons Cone Crusher, gyro disc DBC105 Reconditioned or good used T38 Telsmith Cone Crusher, standard head DBC106 Reconditioned or good used 2 ft Symons Cone Crusher, short head, preferable complete with lube system, electric motor and stand DBC107 Reconditioned or good used 5½ to 7 ft ft Cone Crusher, must be Symons and short head, preferable complete with lube system, electric motor and stand

Jaw Crushers wanted www.tradepost.co.za DBJ078 Reconditioned or good used Jaw Stock complete, without fly-wheels, suitable for a 18 x 32 Telsmith Jaw Crusher

DBJ079 Reconditioned or good used Swing Stock complete with bearings, suitable for a 50 x 60 Telsmith Jaw Crusher, single toggle or alternatively a complete jaw crusher DBJ080 Good used 8 x 12 Telsmith Jaw Crusher DBJ081 Reconditioned or good used Telsmith 50 X 60 Jaw Crusher, single toggle DBJ083 New or reconditioned Jaw Stock complete, suitable for a Telsmith 18 x 32 jaw crusher DBJ084 Metso C105 or C106 Jaw Crusher, to recondition DBJ085 Reconditioned 14 x 24 Jaw Crusher, single toggle, must be Telsmith, Symons or Nordberg, complete with stand, electric motor and starter panel. Required for a project in Mali, operated from a genset, 525 Volt, 50 Hz DBJ086 A set of Jaw Liners as well as a set of good used Flywheels, dive and non-drive end, suitable for a 8 x 12 Telsmith jaw crusher

Impact Crushers wanted www.tradepost.co.za DBK055 Reconditioned or good used Barmac 900 or 1000 Impact Crusher, complete with stand and electric motors

DBK056 Reconditioned or good used Barmac MK111 Impact Crusher DBK057 Reconditioned or good used Pilot Crushtec BR0605 Impact Crusher DBK058 Reconditioned or good used 4 bar Rotor for suitable for a APKV1010 impact crusher DBK059 Reconditioned or good used Barmac 9600 impact crusher DBK060 Reconditioned or good used Hazemag AP-KM Impact Crusher, model 0806 or larger DBK061 Reconditioned or good used Hazemag 0805 Impact Crusher DBK062 Reconditioned or good used Pilot Crushtec AC206 VSI Crusher, or similar VSI Crusher

Mobile & Semi-Mobile Crushers wanted

DBM811 Reconditioned or good used Pilot Crushtec Twister Track, Mobile Crusher DBM812 Reconditioned or good used Mobile Crusher, Terex 1540RSP Cone Crusher DBM813 Good used Metso LT1100GP Cone Crusher DBM814 Reconditioned or good used Terex Finlay 1175 Mobile Jaw Crusher

www.tradepost.co.za

DBM815 Reconditioned or good used Mobile Crusher, equipped with a HP300 or Symons 4¼ Cone Crushers DBM816 Reconditioned or good used Nordberg LT105 or LT106 Mobile Jaw Crusher DBM817 Reconditioned or good used Mobile Cone Crusher, 3 ft, HP200 or SR1000, can also be a Hazemag DBM818 Reconditioned or good used Mobile Crushers, must be diesel driven. Jaw Crusher suitable for 30 to 40 tph, 250 to 300 mm feed size. Cone Crusher suitable for 30 to 40 tph, -60 mm feed size.

Roller Crushers wanted

DBR018 Double Roll, Coal Crusher, 100 th DBR020 Mineral Sizer, suitable for crushing 600 th coal, -200mm feed size to +50 mm DBR026 3 To 5 th, Lab, rolls crusher

www.tradepost.co.za

DBR027 Double Roll Coal Crusher, Schumar or similar, suitable for 500 to 600 tph, 120 mm feed size and 40 mm product size DBR028 Reconditioned or good used 30 x 24 Osborn Double Roll Crusher, required for a spare unit. Refer attached photograph for details

DBR029 One off each, reconditioned or good used Roller Crushers, required for a coal application, suitable to crush 200 tph, 300 mm feed size to 70 mm product size and 100 tph, 70 mm feed size to 37 mm product size

Granulators / Pulverisers / Hammer Mills wanted

DBS001 Reconditioned or good used 12 x 36 Granulator

www.tradepost.co.za

DBS002 New, reconditioned or good used 10 x 48 Granulator DBS003 Good used Flywheel, suitable for a 48 x 18 Hadfield Granulator, drive end or non-drive end DBJ087 Reconditioned or good used 48 x 18 Hadfield Granulator

Crushing Plants wanted www.tradepost.co.za DBT004 Reconditioned or good used, Crushing Plant or Plants, suitable for iron ore. Production: 1500 tph. Maximum feed size: 250 mm. Product size: -32 mm. The plant must be electric driven and be semi-mobile. Required for a project in Sierra Leone. Voltage and Hertz requirements to be confirmed

DBT005 Reconditioned or good used, Crushing Plant, suitable for 30 to 40 tph, equipped with a 10 x 21 or 14 x 24 jaw crusher and 2 ft cone crusher DBT006 Reconditioned or good used, Crushing Plant, suitable for 200 tph, equipped with a 30 x 42 jaw crusher and 48" cone crusher DBT007 Reconditioned or good used, Crushing Plant, suitable for dolerite. Production: 100 tph, with the capacity to increase to 135 tph. Maximum feed size: 175 mm. Product sizes: -40, -28, -20, -14, -10, -6 mm and crusher dust. The plant must be equipped with a 40 m³ receiving bin and VGF. Alternatively, reconditioned or good used bin, VGF, crushers and screens for the above application

Everyone is an agent for Tradepost

Z001 Z002 Tradepost pays an agent`s commission, to agents that refer clients to Tradepost. For a client to be registered, person X must contact Tradepost and confirm that he/she has referred person Y to Tradepost, alternatively person Y must, when he /she makes contact with Tradepost confirm that he/she has been referred by person X. Person X then becomes an agent of Tradepost and person Y gets registered permanent as a client of person X. Person X receives commission for al items of person Y, that are sold by Tradepost and for which Tradepost receives commission. Confirmation of referral is strictly controlled. Allegations of referral subsequent to person Y contacting Tradepost, will not be acknowledged to register a client Agents may register as many clients as possible with Tradepost, irrespective if they want to buy or sell, at time. Agents must get permission from clients that Tradepost lists of items available/for sale may be E-mailed to the clients. The following information of clients must be E-mailed or faxed to Tradepost: Name and surname Contact telephone numbers E-mail address Residential town or city Tradepost will keep register of all clients that are referred by agents. 20% Before VAT, of the commission received by Tradepost, will be paid to agents. Commission is only payable to agents, for items of a client that are sold by Tradepost and for which Tradepost receives commission

Z003

Z003.1 Z003.2 Z003.4 Z003.5 Z004 Z005

Information

Crushing and Screening.xls

35 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

234112


You might also be interested in

BETA
X11TLAC020P
Crushing and Screening.xls