Read PMA20108 Certificate II in Process Plant Operations text version

PMA08 Chemical, Hydrocarbons and Refining (Version 1) PMA20108 Certificate II in Process Plant Operations

Date this PDF was generated: 03 December 2008

Qualifications PMA20108 Certificate II in Process Plant Operations

The Certificate II in Process Plant Operations offers entry level technical training for process plant operators. The Certificate II in Process Manufacturing MSA20107 is available for production support employees at this level and should be used where the job requirements do not allow for the development of competency in sufficient technical units of competency. The Certificate II in Competitive Manufacturing MCM20205 is available for employees at this level where the job requires sophisticated manufacturing practice skills rather than technical skills Note:In some jurisdictions licensing requirements may apply to some units.Check local regulations for details.

Packaging Rules

To be awarded the Certificate II in Process Plant Operations competency must be achieved in sixteen (16) units chosen as specified below. Note that no units in PMA20108 have prerequisite requirements.

Group 1 - Mandatory units

Select all five units from this list MSAPMOHS110A MSAPMSUP100A MSAPMSUP102A MSAPMSUP172A MSAPMOHS200A Follow emergency response procedures Apply workplace procedures Communicate in the workplace Identify and minimise environmental hazards Work safely

Group 2 - Elective units

Select at least four units from this list MSAPMOPS200A PMAOPS201B PMAOPS202B PMAOPS203B PMAOPS204B PMAOPS205B PMAOPS206B Operate equipment Operate fluid flow equipment Operate fluid mixing equipment Handle goods Use utilities and services Operate heat exchangers Operate separation equipment

Volume 1 of 2, Qualification 1 of 6 © Commonwealth of Australia, 2008

Page 86 of 158 To be reviewed by: 30 May 2011

PMA08 Chemical, Hydrocarbons and Refining (Version 1) PMA20108 Certificate II in Process Plant Operations

Date this PDF was generated: 03 December 2008

PMAOPS207B PMAOPS208B PMAOPS210B PMAOPS211B MSAPMOPS212A PMAOPS213B PMAOPS216B PMAOPS217B PMAOPS220B PMAOPS221B PMAOPS222B PMAOPS223B PMAOPS224B PMAOPS230B PMAOPS231B PMAOPS232B PMAOPS240B PMASMELT260B PMASMELT261B PMASMELT262B PMASMELT263B PMASMELT264B PMASMELT265B PMASMELT266B PMASMELT267B PMASMELT268B PMASMELT269A PMASMELT270A PMAOPS280A

Operate powered separation equipment Operate chemical separation equipment Operate particulates handling equipment Operate manufacturing extruders Use enterprise computers or data systems Package product/material Operate local control system Operate wet milling equipment Monitor chemical reactions in the process Operate and monitor prime movers Operate and monitor pumping systems and equipment Operate and monitor valve systems Provide fluids for utilities and support Monitor, operate and maintain pipeline stations and equipment Control gas odourisation Produce product by filtration Store liquids in bulk Form carbon anodes Bake carbon anodes Clean and strip anode rods Spray carbon anodes Start up reduction cells Operate reduction cells Deliver molten metal Cast aluminium ingots Vertical direct casting Operate cell tending equipment Supply product from reduction cells Interpret process plant schematics

Volume 1 of 2, Qualification 1 of 6 © Commonwealth of Australia, 2008

Page 87 of 158 To be reviewed by: 30 May 2011

PMA08 Chemical, Hydrocarbons and Refining (Version 1) PMA20108 Certificate II in Process Plant Operations

Date this PDF was generated: 03 December 2008

PMAOPS290B FDFPHGMP2B UEPOPS319A

Operate a biotreater Implement Good Manufacturing Practice procedures Operate and monitor gas production plant

One unit may be chosen from Group 2 in PMA30108 Certificate III in Process Plant Operations

Group 3 - Other elective units

Select the balance of units (up to seven) from Groups 3A and 3B below, with a maximum of five from Group 3B.

Group 3A

MSAPMOHS205A MSAPMOHS210B PMAOHS211B MSAPMOHS212A PMAOHS213B PMAOHS214B PMAOHS215B MSAPMOHS216A MSAPMOHS217A MSAPMOHS220A PMAOHS221B PMAOMIR210A MSAPMPER200B MSAPMPER201A MSAPMPER202A MSAPMPER205B MSAPMSUP200A MSAPMSUP201A MSAPMSUP204A MSAPMSUP205A Control minor incidents Undertake first response to non-fire incidents Prepare equipment for emergency response Undertake first response to fire incidents Undertake fire control and emergency rescue Undertake helicopter safety and escape Apply offshore facility abandonment and sea survival procedures Operate breathing apparatus Gas test atmospheres Provide initial First Aid response Maintain first aid supplies and records Control evacuation to muster point Work in accordance with an issued permit Monitor and control work permits Observe permit work Enter confined space Achieve work outcomes Receive or despatch goods Pack products or materials Transfer loads

Volume 1 of 2, Qualification 1 of 6 © Commonwealth of Australia, 2008

Page 88 of 158 To be reviewed by: 30 May 2011

PMA08 Chemical, Hydrocarbons and Refining (Version 1) PMA20108 Certificate II in Process Plant Operations

Date this PDF was generated: 03 December 2008

MSAPMSUP210A PMASUP236B PMASUP237B MSAPMSUP240A PMASUP241B PMASUP242B PMASUP243B MSAPMSUP280A MSAPMSUP291A MSAPMSUP292A PMLSAMP200A MSACMS201A MSACMT230A MSACMT231A MSACMT240A MSACMT250A MSACMT251A MSACMT260A MSACMT270A MSACMT271A MSACMT280A MSACMT281A MNMC205A MNMG237A MSAENV272A MEM05012C MEM09002B MEM16005A

Process and record information Operate vehicles in the field Undertake crane, dogging and load transfer operations Undertake minor maintenance Maintain pipeline easements Monitor pipeline civil works Monitor and maintain pipeline coatings Manage conflict at work Participate in continuous improvement Sample and test materials and product Collect routine site samples Sustain process improvements Apply cost factors to work practices Interpret product costs in terms of customer requirements Apply 5S procedures in a manufacturing environment Monitor process capability Apply quality standards Use planning software systems in manufacturing Use sustainable energy practices Use sustainable environmental practices Undertake root cause analysis Contribute to the application of a proactive maintenance strategy Conduct local risk assessment Work safely at heights Participate in environmentally sustainable work practices Perform routine manual metal arc welding Interpret technical drawing Operate as a team member to conduct manufacturing, engineering or related activities

Volume 1 of 2, Qualification 1 of 6 © Commonwealth of Australia, 2008

Page 89 of 158 To be reviewed by: 30 May 2011

PMA08 Chemical, Hydrocarbons and Refining (Version 1) PMA20108 Certificate II in Process Plant Operations

Date this PDF was generated: 03 December 2008

TLID1007C

Operate a forklift

Group 3B

MSAPMOHS100A MSAPMSUP101A MSAPMSUP106A MEM11011B MSAPMOPS100A PMAOPS101C MSAPMOPS102A PMAOPS105C FDFPHGMP1A Follow OHS procedures Clean workplace or equipment Work in a team Undertake manual handling Use equipment Read dials and indicators Perform tasks to support production Select and prepare materials Follow work procedures to maintain Good Manufacturing Practice

Up to two relevant units may be chosen from other endorsed Training Packages or from other qualifications in this Training Package.

Volume 1 of 2, Qualification 1 of 6 © Commonwealth of Australia, 2008

Page 90 of 158 To be reviewed by: 30 May 2011

Information

PMA20108 Certificate II in Process Plant Operations

5 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

1116326


Notice: fwrite(): send of 198 bytes failed with errno=32 Broken pipe in /home/readbag.com/web/sphinxapi.php on line 531