Read C:\Documents and Settings\JCruz\Local Settings\Temp\AutoDeskViewer\v-1180617609.idw.dwf text version

TEMPLATE NO. 17609 SHT 1 OF 1

DOOR PREPARATION TEMPLATE INSTRUCTIONS 1 POSITION TEMPLATE 2 MARK DOOR 3

PRODUCT 8310-DUMMY KNOB INSTALLATION INSTRUCTIONS

DRILL PILOT HOLES

Point No. 1

Point No. 1

Point No. 2

Point No. 2

Determine latch backset (2-3/8" or 2-3/4"). Fold enclosed dummy knob template on dotted line and locate on door at desired height. Place folded edge on edge of door. Tape dummy knob template in place.

Mark appropriate drill points on door to correspond with points on dummy knob template. INSTALLATION INSTRUCTIONS

Using 1/8" dia drill bit, drill pilot holes to a depth of 1-1/4".

1

INSTALL DUMMY KNOB ASSEMBLY

dummy knob assembly

#10-32 screws

remove packaging washers

Remove packaging screws and black nylon packaging washers. Remove mounting screws from package. Install dummy knob assembly and fasten with two (2) wood mounting screws.

NOTE: This template is provided for use only on the job for which is was requested. Trimco reserves the right to make design changes without notice. Trimco will not be responsible for errors or damage caused by the use of out-of-date templates.

DATE 05/31/06

Information

C:\Documents and Settings\JCruz\Local Settings\Temp\AutoDeskViewer\v-1180617609.idw.dwf

1 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

425249


You might also be interested in

BETA
C:\Documents and Settings\JCruz\Local Settings\Temp\AutoDeskViewer\v-1180617609.idw.dwf
Objectives