Read Ag Supply - Driveline Components text version

QUICK REFERENCE SECTION

CROSS REFERENCE CHART

NORTH AMERICAN COMPONENTS

Weasler Cross & Brg Kit Stock # Weasler Aftmkt. U-Joint Series Weasler U-Joint Series APC/Wesco Chainbelt U-Joint U-Joint Series Series G&G U-Joint Series Neapco U-Joint Series Rockwell U-Joint Series Spicer U-Joint Series

A-200-0100 A-200-0300 A-200-0600 6 L6W/6RW 6N 6R ­ 6N L600 0675 W

1FR 3DR L6N ­

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

QUICK REFERENCE SECTION

A-200-0675 A-200-0700 A-200-1000 A-200-1200 12 14 12RW 12R 14R/GN 14NW 12N 14N R12N R31N/120 R14N/140 12N 14N

1000 1200 2000 1800 2600 35 44 55 35RW/35R DN/35NW 44R L55/55NW 55R 35N 44N ­ R35N/350 440 ­ 35N 14R 55N 2200 44R ­ 35N 44R 55N 1480 1340 1440 ­ L12N L14N 1140 1240

A-200-1400

A-200-1875 A-200-2600 A-200-3500

A-200-1400 A-200-5500

METRIC COMPONENTS

Cross & Bearing Kit Stock # _____________

A-200-6154 A-200-6580 A-200-6794 A-200-6806 A-200-6908 A-200-7004 A-200-7155 A-200-7676 A-200-7890 A-200-7989 A-200-8261 A-200-8370 A-200-8474 A-200-8692 A-200-8706 A-200-7276 A-200-7491 A-200-7694 A-200-7906

Interchanges with Bondioli & Pavesi Series __________________

1 5 7N 8 9 ­ ­ ­ ­ ­ 2 3 4 6 7 (Old Series) ­ ­ ­ ­

Interchanges with Walterscheid Series ______________

­ ­ ­ ­ ­ 2600 2100 2400 II 2500 2200 I 2300 220 230 2280 2380 2480 2580

QUICK REFERENCE SECTION

QUICK REFERENCE for Cross & Bearing Kits

NORTH AMERICAN

WEASLER PART NO.

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

the bushing (Internal) A Snap Ring located in

the yoke (External) B Snap Ring located in

WEASLER SERIES

Rockwell 1FR Rockwell 3DR 6 0675 W 1000 12 14 1800 2600 35 44 55

RATED H/P @ 540 RPM

­ ­ 16 15 ­ 15 24 33 30 100 59 87 121

RATED H/P @1000 RPM

­ ­ 30 24 ­ 24 45 62 48 144 111 165 230

BEARING DIAMETER

7/8" 1" 31/32" 15/16" 9/16" 15/16" 1 1/16" 1 1/8" 1" 1 3/8" 1 1/4" 1 5/16" 1 17/32"

CAP TO CAP SNAP RING OVERALL LENGTH TYPE

2 15/16" 3 15/16" 2 5/16" 2 5/16" 1 1/2" 2 9/32" 2 9/16" 2 5/8" 3 7/16" 4 3/16" 3 7/32" 4" 4 5/16" B B A A Pin & Block A A B A B B A B

PAGE NO.

41 41 10 39 37 40 15 19 41 42 24 29 33

A-200-0100 A-200-0300 A-200-0600 A-200-0675 A-200-0700 A-200-1000 A-200-1200 A-200-1400 A-200-1875 A-200-2600 A-200-3500 A-200-4400 A-200-5500

QUICK REFERENCE SECTION

ITALIAN SERIES

WEASLER PART NO.

A-200-6154 A-200-8261 A-200-8370 A-200-8474 A-200-6580 A-200-8692 A-200-6794 A-200-6806 A-200-6908

WEASLER SERIES

1 2 3 4 5 6 7N 8 9

RATED H/P @ 540 RPM

16 21 30 35 48 64 75 95 120

BEARING DIAMETER

22.0 mm 23.8 mm 27.0 mm 27.0 mm 30.2 mm 30.2 mm 34.9 mm 35.0 mm 41.0 mm

CAP TO CAP OVERALL LENGTH

54.0 mm 61.2 mm 70.0 mm 74.6 mm 79.4 mm 92.0 mm 94.0 mm 106.5 mm 108.0 mm

SNAP RING TYPE

B B B B B B B B B

PAGE NO.

52 54, 72 56, 75 58, 77 60 62, 80 64 66 68

GERMAN SERIES

WEASLER PART NO.

A-200-7155 A-200-8261 A-200-8370 A-200-8474 A-200-8692 A-200-7676 A-200-7989 A-200-7004

WEASLER SERIES

2100 2200 I 2300 220 2400 2500 2600

RATED H/P @ 540 RPM

16 26 30 37 64 53 90 108

BEARING DIAMETER

22.0 mm 23.8 mm 27.0 mm 27.0 mm 30.2 mm 32.0 mm 36.0 mm 42.0 mm

CAP TO CAP OVERALL LENGTH

54.8 mm 61.2 mm 70.0 mm 74.6 mm 92.0 mm 76.0 mm 89.0 mm 104.0 mm

SNAP RING TYPE

B B B B B B B B

PAGE NO.

70 54, 72 56, 75 58, 77 62, 80 82 86 89

QUICK REFERENCE SECTION

Shafting and Tubing

North American Shaft North American Tube

Stock Number A-600-0012 A-600-0015 A-600-0016 A-600-0020 A-600-1618 A-600-2022 A-601-1618 A-601-2022 A-602-0600 A-602-1400 A-602-2600 A-602-3500 A-602-3501 A-602-4400 A-603-1400 A-603-3500 A-603-4400 A-604-0600 A-604-1400 A-604-1618 A-604-2022 A-604-3500 A-604-4400

QUICK REFERENCE SECTION

Stock Number A-400-0012 A-400-0015 A-400-0016 A-400-0019 A-400-0020 A-400-0021 A-400-1214 A-400-1618 A-401-0019 A-401-0021 A-401-1214 A-401-1618 A-402-0016 A-402-0018 A-402-0020 A-404-0019 A-404-0021 A-404-1214 A-404-1615H A-404-1618 A-404-2120 A-404-2720

Size 3/4" Sq. 15/16" Sq. 1" Sq. 1 3/16" Sq. 1 1/4" Sq. 1 5/16" Sq. 3/4" x 7/8" Rect. 1" x 1 1/8" Rect. 1 3/16" Sq. 1 5/16" Sq. 3/4" x 7/8" Rect. 1" x 1 1/8" Rect. 1" Hex 1 1/8" Hex 1 1/4" Hex 1 3/16" Sq. 1 5/16" Sq. 3/4" x 7/8" Rect. 1" x 15 Spl. 1" x 1 1/8" Rect. 1 5/16" x 20 Spl. 1 11/16" x 20 Spl.

Length 6' 6' 6' 6' 6' 6' 6' 6' 10' 10' 10' 10' 6' 6' 6' 3' 3' 3' 3' 3' 3' 3'

Size 1" Sq. 1 1/4" Sq. (.120 wall) 1 1/4" Sq. (.109 wall) 1 5/8" Sq. 3/4" x 7/8" Rect. 1 1/4" x 1 3/8" Rect. 3/4" x 7/8" Rect. 1 1/4" x 1 3/8" rect. 1 1/2" Rd. 2" Rd. (.083 wall) 2 3/4" Rd. (.109 wall) 2 1/8" Rd. (.120 wall) 2 1/8" Rd. (.083 wall) 2 1/2" Rd. (.120 wall) 2" Rd. (.083 wall) 2 1/8" Rd. (.120 wall) 2 1/2" Rd. (.120 wall) 1 1/2" Rd. 2" Rd. (.083 Wall) 3/4" x 7/8" Rect. 1 1/4" x 1 3/8" Rect. 2 1/8" Rd. (.120 Wall) 2 1/2" Rd. (.120 wall)

Length 6' 6' 6' 6' 6' 6' 10' 10' 6' 6' 6' 6' 6' 6' 10' 10' 10' 3' 3' 3' 3' 3' 3'

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

Metric Inner Profile Tube

Metric Outer Profile Tube

Stock Number A-400-6126 A-404-6126 A-400-6229 A-404-6229 A-400-6336 A-404-6336 A-400-6436 A-404-6436 A-400-6545 A-404-6545 A-400-6745 A-404-6745 A-400-6854 A-404-6854 A-400-7123 A-404-7123 A-400-7234 A-404-7234 A-400-7539 A-404-7539 A-400-7951 A-404-7951 A-400-7061 A-404-7061 A-406-7234 A-402-7639 A-406-7951

Series ByPy 1 ByPy 1 ByPy 2 ByPy 2 ByPy 3 ByPy 3 ByPy 4 ByPy 4 ByPy 5 and 6 ByPy 4 and 6 ByPy 7N ByPy 7N ByPy 8 and 9 ByPy 8 and 9 W/S 2100 W/S 2100 W/S 2200, I and 2300 W/S 2200, I and 2300 W/S 220 and 2400 W/S 220 and 2400 W/S 2500 W/S 2500 W/S 2600 W/S 2600 W/S 2280/2380 W/S 2480 W/S 2580

Length 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 39 3/8" 39 3/8" 39 3/8"

Stock Number A-600-6133 A-604-6133 A-600-6236 A-604-6236 A-600-6343 A-604-6343 A-600-6552 A-604-6552 A-600-6654 A-604-6654 A-600-6863 A-604-6863 A-600-7130 A-604-7130 A-600-7241 A-604-7241 A-600-7548 A-604-7548 A-600-7961 A-604-7961 A-600-7071 A-604-7071 A-606-7241 A-606-7648

Series ByPy 1 ByPy 1 ByPy 2 ByPy 2 ByPy 3 and 4 ByPy 3 and 4 ByPy 5 ByPy 5 ByPy 6 and 7N ByPy 6 and 7N ByPy 8 and 9 ByPy 8 and 9 W/S 2100 W/S 2100 W/S 2200, I and 2300 W/S 2200, I and 2300 W/S 220 and 2400 W/S 220 and 2400 W/S 2500 & 2580 W/S 2500 & 2580 W/S 2600 W/S 2600 W/S 2280/2380 W/S 2480

Length 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 39 3/8" 39 3/8"

QUICK REFERENCE SECTION

North American Nylon Bearing Repair Kit

(Kit includes nylon bearing and retainer) NOTE! Not all guard and bearing systems are interchangeable. When purchasing shaft weld and tube weld yokes or guards, make certain there is a proper fit between nylon bearing raceway in yoke and guard. The nylon bearings provided with our replacement guards are the most popular in the replacement market. If the nylon bearing provided with the guard is not a proper fit, it is essential that the proper nylon is identified and installed to insure proper performance and safety. To assist in ordering the proper nylon, listed below are stock numbers and dimensions for our standard aftermarket and OEM nylons.

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

QUICK REFERENCE SECTION

A

A

B

C

Stock Number A-920-0017 A-920-0069 A-920-0085 A-920-0102 A-920-0141 A-920-0165 A-920-0187 A-920-0195 A-920-0254 A-920-0259 A-920-0260 A-920-0600 A-920-1200 A-920-2600 A-920-3500 A-920-4400 A-920-4P15 A-920-4P16 A-920-5071 A-920-5084 A-920-4N15 A-920-4N16

Dim. "A" Yoke Raceway O.D. Nylon Bearing I.D. 2 1/8" 1 3/4" 2" 1 3/8" 1 5/8" 2 1/8" 2 5/8" 1 3/4" 1 5/8" 2" 2 17/32" 1 13/16" 2 1/16" 2 7/8" 2 1/16" 2 5/8" 1 21/32" 1 25/32" 2 1/32" 2 5/32" 1 61/64" 2 1/8" (2.125") (1.75") (2.0") (1.375") (1.625") (2.125") (2.625") (1.75") (1.625") (2.0") (2.530") (1.825") (2.0625") (2.875") (2.0625") (2.625") (1.646") (1.770") (2.021") (2.146") (1.947") (2.125")

Dim. "B" Yoke Raceway Width Nylon Bearing Width 3/8" 3/8" 3/8" 11/32" 11/32" 3/8" 3/8" 3/8" 11/32" 3/8" 33/64" 9/32" 11/32" 11/32" 11/32" 3/8" 11/32" 11/32" 11/32" 11/32" 9/32" 21/64" (.375") (.375") (.375") (.3437") (.3437") (.375") (.375") (.375") (.3437") (.375") (.358") (.2812") (.3437") (.3437") (.3437") (.375") (.358") (.358") (.358") (.358") (.291") (.341")

Dim. "C" Nylon Bearing O.D. 2 3/4" 2 3/4" 2 3/4" 2" 2 3/4" 3 1/4" 3 1/4" 2 1/2" 2 1/4" 1/4" 3 2 49/64" 2 3/4" 2 3/4" 3 9/16" 2 3/4" 3 1/4" 2 3/4" 2 3/4" 2 3/4" 2 3/4" 2 1/4" 2 1/2" (2.75") (2.75") (2.75") (2.0") (2.75") (2.25") (2.25") (2.50") (2.25") (3.25") (2.770") (2.75") (2.75") (3.5625") (2.75") (3.25") (2.76") (2.76") (2.76") (2.76") (2.25") (2.50")

NOTE! 6, 12, 14, 35 Series North American guards will be provided with (2) sets of nylon bearings. To help assure the proper set of nylon bearings are installed, one bearing set will be exactly the same (bearing raceway dimensions) as has always been provided in our aftermarket guards. The other set will be dimensioned to retrofit the Weasler OEM raceway. Assembly instructions included with these guards.

QUICK REFERENCE SECTION

Locking Device

Safety Slide Lock*

An exclusive Weasler replacement component, the Safety Slide Lock* yoke is locked in place by two hardened pawls with compound radii that conform to the groove in the shaft for full contact. The device is particularly applicable where there is appreciable end thrust.

Spring-Lok*

The collar is spring loaded for ease of installation and positive locking to tractor shaft.

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

QUICK REFERENCE SECTION

Quick Disconnect

A smooth plunger eliminates sharp projections such as x-washers. Trails rather than leads rotation. *Exclusive products of Weasler Engineering

Locking Device Repair Kit

*Auto-Lok/Safety Slide Lock

Stock No. A-13004000 Repair Kit for Weasler Auto-Lok and Safety Slide Lock 6 Spline & 21 Spline Repair Kit for Weasler Auto-Lok and Safety Slide Lock 20 Spline

Stock No. A-13004020

* This repair kit contains both balls & pawls. When repairing the "Safety Slide Lock" use the balls only and discard the pawls. When repairing the "Auto-Lok" use both the balls and the pawls.

Spring-Lok

Stock No. A-13003100 Repair Kit for Weasler Spring-Lok 6 Spline & 21 Spline 1" x 15 Spline

Stock No. A-13003115

Quick Disconnect

Stock No. A-13002006 Stock No. A-13002806 Stock No. A-13002021 Stock No. A-13002020 Repair Kit for Weasler and Rockwell 6 Spline Repair Kit for 1 3/4" x 6 Spl. Weasler 21 Spline and Hex Quick Disconnect Weasler 20 Spline

DRIVELINE COMPONENTS

Cross & Bearing Kit Tube Yoke

700 200

Tube

600

Implement Yoke

800

Shaft Yoke

300

Shaft

400

Cross & Bearing Kit

200

Tractor Yoke

100

Bearing Kit

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

920

Guard

900

DRIVELINE COMPONENTS

Bearing Kit

920

Each series has an exploded view for identification purposes. The drawing illustrates the components in the same sequence as an implement input driveline transmitting power from tractor to implement. Each component of the exploded view is identified by an eight digit stock number to insure correct identification of each component. Example: 100 prefix denotes a Spring-Lok Tractor Yoke on the exploded view. [When ordering a tractor yoke, be sure the stock number begins with 100.] Number Identification Examples: 102 - 06 06 6 Spline 6 Series QD Yoke Tractor Yoke 200 - 06 00 6 Series Cross & Bearing Kit 300 - 12 00 12 Series Shaft Weld Yoke 400 - 16 -18 *1 1/8" *1" Shaft 500 - 35 00 35 Series Slip Sleeve (* Expressed in 1/16th inches) 900 - 44 48 For 48" O.A. Driveline 44 Series Plastic Shield 800 - 35 24 *1 1/2" Round Bore 35 Series Implement Yoke 701 - 44 00 44 Series Tube Weld Yoke 602 - 44 00 44 Series Tube

6 SERIES

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

SPRING-LOK TRACTOR YOKE PART

A-100-0606 A-100-0621

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

AUTO-LOK TRACTOR YOKE PART

A-101-0610 A-101-0615

DIM "A" BORE

.981" x 10 Spl. 1" x 15 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-0606 A-102-0621

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

LAWN & GARDEN SPRING-LOK TRACTOR YOKE (metal collar) PART DIM "A" BORE

A-105-0610 A-105-0615 .98" x 10 Spl. 1 " x 15 Spl.

LAWN & GARDEN MALE SPLINE TRACTOR YOKE PART DIM "A"

A-106-0615 1 " x 15 Spl.

6 SERIES

CROSS & BEARING KIT Snap Ring Located in Bushing PART

A-200-0600

DIM "A"

31/32"

DIM "B"

2 9/32"

SHAFT WELD YOKE With Bearing Groove PART

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. A-300-0600 A-302-0600 A-303-0600

DIM "A" BORE

1" x 15 Spl.

DIM "B" BORE

3/4" x 7/8" 3/4" x 7/8"

SPLINE SHAFT WELD YOKE Without Bearing Groove PART

A-301-0600

DRIVELINE COMPONENTS

DIM "A" BORE

1" x 15 spl.

3/4" X 7/8" RECTANGULAR SHAFT PART

A-400-1214 A-401-1214 A-404-1214

LENGTH

6' 10' 3'

1" X 15 SPLINE SHAFT PART LENGTH

A-404-1615H 3'

SLIP SLEEVE with Grease Groove PART

A-510-0600 A-510-0615

LENGTH

4" 3"

DIM "A" BORE

3/4" x 7/8" Rect

DIM "B" BORE

1" x 15 Spl.

FITS TUBE

1 1/2" (.065 Wall) 1 1/2" (.065 Wall)

1" X 1 1/8" RECTANGULAR O.D. TUBE PART LENGTH

A-600-1618 A-601-1618 A-604-1618 6' 10' 3'

FITS SHAFT

3/4" x7/8" 3/4" x7/8" 3/4" x7/8"

1 1/2" ROUND (.065 WALL ) TUBE PART

A-602-0600 A-604-0600

LENGTH

6' 3'

TUBE WELD YOKE With Bearing Groove PART

A-700-0600 A-701-0600

DIM "A" BORE

1" x 1 1/8" 1 1/2" (.065 Wall)

6 SERIES

TUBE WELD YOKE Without Bearing Groove PART

A-702-0600 A-703-0600

FITS TUBE

1 1/2" (.065 Wall) 1 1/2" (.065 Wall)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-0610 A-800-0612 A-800-0613 A-800-0614 A-800-0615 A-800-0616 A-800-0618 A-800-0619 A-800-0620

DIM "A" BORE

5/8" 3/4" 13/16" 7/8" 15/16" 1" 1 1/8" 1 3/16" 1 1/4"

STD. KEYWAY

3/16" 3/16" 3/16" 3/16" 1/4" 1/4" 1/4" 1/4" 1/4"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

SPLINE BORE IMPLEMENT YOKE With 1/4" Pin Hole PART

A-801-0606 A-801-0618

DIM "A" BORE

1 3/8" x 6 Spl. 1 1/8" x 6 Spl.

SHEAR PIN IMPLEMENT YOKE With 1/4" Pin Hole PART

A-802-0616 A-802-0618 A-802-0620

DIM "A" BORE

1" 1 1/8" 1 1/4"

SQUARE BORE IMPLEMENT YOKE With Set Screw PART

A-804-0612 A-804-0614 A-804-0616 A-804-0618 A-804-0620

DIM "A" BORE

3/4" 7/8" 1" 1 1/8" 1 1/4"

ROUND BORE IMPLEMENT YOKE With Double Keyway & Set Screw PART

A-806-0612 A-806-0613 A-806-0614 A-806-0616 A-806-0618 A-806-0619 A-806-0620

DIM "A" BORE

3/4" 13/16" 7/8" 1" 1 1/8" 1 3/16" 1 1/4"

DBL. KEYWAY

3/16" & 1/4" 3/16" & 1/4" 3/16" & 1/4" 3/16" & 1/4" 1/4" & 5/16" 1/4" & 5/16" 1/4" & 5/16"

IMPLEMENT CLAMP YOKE With Bolt Hole & Set Screw PART

A-807-0614 A-807-0615 A-807-0616

DIM "A" BORE

7/8"

DIM "B" BORE

1" x 15 Spl.

KEYWAY

3/16" 1/4"

1"

6 SERIES

STOCK BORE IMPLEMENT YOKE With Hub O. D. Turned PART

A-809-0608

DIM "A" BORE

1/2"

SLIP SLEEVE IMPLEMENT YOKE PART

A-808-0612 A-808-0614 A-812-0615 A-813-0600

DIM "A" BORE

3/4" Sq. 7/8" Sq.

DIM "B" BORE

DIM "C" BORE

DIM "D" LENGTH

5 1/2" 5 1/2" 5 1/2" 5 1/2"

1" x 15 Spl. 3/4" x 7/8" Rect.

PLASTIC GUARD

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

PART

A-900-0624 A-900-0648

BEARINGS

920-1118 920-0600 & 920-4P16

OVERALL LENGTH

24" 48"

DRIVELINE COMPONENTS

OUTER GUARD PART

A-900-0612

METAL GUARD With Bearings (920-0600 & 920-4N15 - assembly instructions included with guard) PART OVERALL LENGTH

A-901-0648 48"

YOKE & SHAFT ASSEMBLY PART

A-10000610 A-10000648

SHAFT SIZE

1" x 15 Spl. 3/4" x 7/8"

CL. TO END

12.50" 38.75"

YOKE & TUBE ASSEMBLY 1" X 1 1/8"TUBE PART FITS SHAFT

A-11000648 3/4" x 7/8"

CL. TO END

38.75"

ROUND TO ROUND JOINT with Keyway & Set Screw PART

A-15120612 A-15160616

DIM "A" BORE

3/4 " 1"

DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART TRACTOR YOKE COMPRESSED LENGTH

A-14000648 1 3/8" x 6 Spl. Spring Lok 48"

DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART COMPRESSED LENGTH

A-14010648 48"

6 SERIES

DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART TRACTOR YOKE IMPLEMENT YOKE COMPRESSED LENGTH APPL.

A-14000600 A-14000616 A-14000620 A-14000638 1 3/8" x 6 Spl. Spring Lok 1 3/8" x 6 Spl. Spring Lok 1 3/8" x 6 Spl. Spring Lok 1 3/8" x 6 Spl. Q.D. 1" Round with Pin Hole 1" Round 1/4" Keyway 1 3/8" x 6 Spl. Spring Lok 1" Round with Pinhole 39" 48" 27 1/4" 38" Finishing Mower Auger Fertilizer Spreader All Purpose

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

12 SERIES

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

SPRING-LOK TRACTOR YOKE PART

A-100-1206 A-100-1221

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-1206 A-102-1221

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

BALL SHEAR DEVICE With Spring-Lok PART

A-104-1206 A-104-1221

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

SHEAR BOLT

5/16" - 18 Gr. 5 5/16" - 18 Gr. 5

CROSS & BEARING KIT Snap Ring Located in Bushing PART

A-200-1200

DIM "A"

1 1/16"

DIM "B"

2 9/16"

12 SERIES

SHAFT WELD YOKE With Bearing Groove PART

A-300-1200

DIM "A" BORE

1" x 1 1/8"

1" X 1 1/8" RECTANGULAR SHAFT PART

A-400-1618 A-401-1618 A-404-1618

LENGTH

6' 10' 3'

SLIP SLEEVE With Grease Groove

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

PART

DIM "A" BORE

1"x1 1/8" Rect.

DIM "B" BORE

1 5/16" x 20 Spl.

LENGTH

5" 8"

FITS TUBE

2" (.083 Wall) 2" (.083 Wall)

DRIVELINE COMPONENTS

A-500-1400 A-501-1400

1 1/4" X 1 3/8" RECTANGULAR O.D. TUBE PART LENGTH

A-600-2022 A-601-2022 A-604-2022 6' 10' 3'

FITS SHAFT

1" x 1 1/8" 1" x 1 1/8" 1" x 1 1/8"

2"TUBE (.083 WALL) PART

A-602-1400 A-603-1400 A-604-1400

LENGTH

6' 10' 3'

TUBE WELD YOKE With Bearing Groove PART

A-700-1200 A-701-1200

DIM "A" BORE

1 1/4" x 1 3/8"

DIM "B" FITS TUBE SIZE

2" (.083 Wall)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-1212 A-800-1214 A-800-1215 A-800-1216 A-800-1218 A-800-1219 A-800-1220 A-800-1222 A-800-1224

DIM "A" BORE

3/4" 7/8" 15/16" 1" 1 1/8" 1 3/16" 1 1/4" 1 3/8" 1 1/2"

STD. KEYWAY

3/16" 3/16" 1/4" 1/4" 1/4" 1/4" 1/4" 5/16" 3/8"

SPLINE BORE IMPLEMENT YOKE With 21/64" Pin Hole PART

A-801-1206 A-801-1210 A-801-1218 A-801-1221

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/16" x 10 Spl. (No Pin Hole) 1 1/8" x 6 Spl. 1 3/8" x 21 Spl.

12 SERIES

SHEAR PIN IMPLEMENT YOKE With 1/4" Pin Hole PART

A-802-1216 A-802-1218 A-802-1220 A-802-1222

DIM "A" BORE

1" 1 1/8" 1 1/4" 1 3/8"

SQUARE BORE IMPLEMENT YOKE With Set Screw PART

A-804-1214 A-804-1216 A-804-1218 A-804-1220 A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DIM "A" BORE

7/8" 1" 1 1/8" 1 1/4"

HEXAGON BORE IMPLEMENT YOKE With Set Screw PART

A-805-1218

DIM "A" BORE

1 1/8"

DRIVELINE COMPONENTS

ROUND BORE IMPLEMENT YOKE With Double Keyway & Set Screw PART

A-806-1216 A-806-1218 A-806-1220

DIM "A" BORE

1" 1 1/8" 1 1/4"

DBL. KEYWAY

1/4" & 3/16" 1/4" & 5/16" 1/4" & 5/16"

STOCK BORE IMPLEMENT YOKE With hub O.D. Turned PART

A-809-1208

DIM "A" BORE

1/2"

SLIP YOKE PART

A-811-1218

DIM "A" BORE

1 1/8" Hex

PLASTIC GUARD With Bearings (920-1200 & 4P16 - assembly instructions included with guard) PART OVERALL LENGTH

A-900-1248 A-900-1260 48" 60"

METAL GUARD With Bearings (920-1200 & 920-4N16 - assembly PART OVERALL LENGTH

A-901-1248 A-901-1272 48" 72"

YOKE & SHAFT ASSEMBLY PART

A-10001248 A-10001260

CL. TO END

37.38" 49.38"

12 SERIES

YOKE & TUBE ASSEMBLY 1 1/4" X 1 3/8"TUBE PART FITS SHAFT

A-11001248 A-11001260 1" x 1 1/8" 1" x 1 1/8"

CL. TO END

37.38" 49.38"

SPRING LOK TO SHAFT WELD YOKE UNIVERSAL JOINT PART DIM "A" BORE

A-15061200 1 3/8" x 6 Spl.

DIM "B" BORE

1" x 1 1/8" Rect.

DRIVELINE PART

A-14001248 A-14001260

TRACTOR YOKE

1 3/8" x 6 Spl. Spring-Lok 1 3/8" x 6 Spl. Spring-Lok

COMPRESSED LENGTH

48" 60" A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE PART COMPRESSED LENGTH

48" 60" 48"

DRIVELINE COMPONENTS

A-14011248 A-14011260 A-14021248

DRIVELINE PART

A-14001220

TRACTOR YOKE

1 3/8" x 6 Spl. Spring Lok

IMPLEMENT YOKE

1 1/4" Round 1/4" Keyway

COMPRESSED LENGTH APPL.

48" Augers

14 SERIES

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

SPRING-LOK TRACTOR YOKE PART

A-100-1406 A-100-1421

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

SAFETY SLIDE LOCK TRACTOR YOKE PART DIM "A" BORE

A-101-1420 1 3/4" x 20 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-1406 A-102-1418 A-102-1421

DIM "A" BORE

1 3/8" x 6 Spl.

DIM "B" BORE

1 1/ 8" Hex

1 3/8" x 21 Spl.

BALL SHEAR DEVICE TRACTOR YOKE With Spring-Lok PART DIM "A" BORE

A-104-1406 A-104-1421 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

SHEAR BOLT

5/16" - 18 Gr. 5 5/16" - 18 Gr. 5

14 SERIES

CROSS & BEARING KIT Snap Ring Located in Yoke PART

A-200-1400

DIM "A"

1 1/8"

DIM "B"

2 5/8"

SHAFT WELD YOKE With Bearing Groove PART

A-300-1400 A-301-1400

DIM "A" BORE

1" x 1 1/8"

DIM "B" BORE

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. 1 5/16" x 20 Spl.

DRIVELINE COMPONENTS

1" X 1 1/8" RECTANGULAR SHAFT PART

A-400-1618 A-401-1618 A-404-1618

LENGTH

6' 10' 3'

1 5/16" X 20 SPLINE SHAFT PART

A-404-2120

LENGTH

3'

1" X 1 1/8" RECTANGULAR SLIP SLEEVE With Grease Groove PART LENGTH

A-500-1400 5"

FITS TUBE

2" (.083 Wall)

1 5/16" X 20 SPLINE SLIP SLEEVE With Grease Reservoir PART

A-501-1400

LENGTH

8"

FITS TUBE

2" (.083 Wall)

1 1/4" X 1 3/8 RECTANGULAR O.D. PART

A-600-2022 A-601-2022 A-604-2022

LENGTH

6' 10' 3'

FITS SHAFT

1" x 1 1/8" 1" x 1 1/8" 1" x 1 1/8"

2" ROUND TUBE (.083 Wall ) PART

A-602-1400 A-603-1400 A-604-1400

LENGTH

6' 10' 3'

TUBE WELD YOKE With Bearing Groove PART

A-700-1400 A-701-1400

DIM "A" BORE

1 1/4" x 1 3/8"

DIM "B" FITS TUBE SIZE

2" (.083 Wall)

14 SERIES

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-1416 A-800-1418 A-800-1419 A-800-1420 A-800-1422 A-800-1423 A-800-1424

DIM "A" BORE

1" 1 1/8" 1 3/16" 1 1/4" 1 3/8" 1 7/16" 1 1/2"

STD. KEYWAY

1/4" 1/4" 1/4" 1/4" 5/16" 3/8" 3/8"

SPLINE BORE IMPLEMENT YOKE With 21/64" Pin Hole PART

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. A-801-1406 A-801-1418 A-801-1420 A-801-1421

DIM "A" BORE

1 3/8" x 6 Spl. 1 1/8" x 6 Spl. 1 1/4" x 6 Spl. 1 3/8" x 21 Spl.

DRIVELINE COMPONENTS

SHEAR PIN IMPLEMENT YOKE With Pin Hole PART

A-802-1418 A-802-1420 A-802-1422 A-802-1424

DIM "A" BORE

1 1/8" 1 1/4" 1 3/8" 1 1/2"

PIN HOLE

1/4" 1/4" 1/4" & 1/2" 1/4"

TORQUE LIMITER FLANGE IMPLEMENT YOKE (Fits Great Lakes Clutch) PART

A-803-1400

SQUARE BORE IMPLEMENT YOKE With Set Screw PART

A-804-1414 A-804-1416 A-804-1418 A-804-1419 A-804-1420

DIM "A" BORE

7/8" 1" 1 1/8" 1 3/16" 1 1/4"

HEXAGON BORE IMPLEMENT YOKE With Set Screw PART

A-805-1420 A-805-1418

DIM "A" BORE

1 1/4" 1 1/8"

ROUND BORE IMPLEMENT YOKE Double Keyway & Set Screw PART

A-806-1418 A-806-1419 A-806-1420

DIM "A" BORE

1 1/8" 1 3/16" 1 1/4"

DBL. KEYWAY

1/4" & 5/16" 1/4" & 5/16" 1/4" & 5/16"

14 SERIES

STOCK BORE IMPLEMENT YOKE With Hub O. D. Turned PART

A-809-1412

DIM "A" BORE

3/4"

PLASTIC GUARD With Bearings (920-1200 & 920-5071) When installing Metal or Plastic Guards observe the following: 1) Install proper nylon bearing and retainer 2) Check to insure guards turn freely on bearing PART OVERALL LENGTH

A-900-1248 A-900-1260 48" 60"

METAL GUARD With Bearings (920-1200 & 920-4N16) When installing Metal or Plastic Guards observe the following: 1) Install proper nylon bearing and retainer 2) Check to insure guards turn freely on bearing PART OVERALL LENGTH

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

A-901-1248 A-901-1272

48" 72"

YOKE & SHAFT ASSEMBLY 1" X 1 1/8" SHAFT PART CL. TO END

A-10001438 A-10001448 A-10001460 26.12" 35.62" 47.62"

YOKE, TUBE & SLEEVE ASSEMBLY 1" X 1 1/8" RECTANGULAR PART CL. TO END

A-11001438 A-11001448 A-11001460 26.12" 35.12" 48.12"

UNIVERSAL JOINT Spring-Lok to Shaft Weld Yoke PART

A-15061400

DIM "A" BORE

1 3/8" x 6 Spl.

DIM "B" BORE

1" x 1 1/8" Rect.

DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART TRACTOR YOKE COMPRESSED LENGTH

A-14001448 A-14001460 1 3/8" x 6 Spl. Spring Lok 1 3/8" x 6 Spl. Spring Lok 48" 60"

DRIVELINE PART

A-14011448 A-14011460 A-14021448

COMPRESSED LENGTH

48" 60" 48"

DRIVELINE PART

A-14001404 A-14001405 A-14001406 A-14001420

TRACTOR YOKE

1 3/8" x 6 Spl. Spring-Lok 1 3/8" x 6 Spl. Spring-Lok 1 3/8" x 6 Spl. Spring-Lok 1 3/8" x 6 Spl. Spring-Lok

IMPLEMENT YOKE

1 3/8" Rnd 1/2" Shear Pin Hole 1 3/8" Rnd 1/2" Shear Pin Hole 1 3/8" Rnd 1/2" Shear Pin Hole 1 1/4" Rnd 1/4" Keyway

COMPRESSED LENGTH APPL.

30 3/16" 37 3/16" 56 3/16" 48" 4 ft. Lift Type Rotary Cutter 5 ft. Lift Type Rotary Cutter 5 & 6 ft. Pull Type Cutter Auger

35 SERIES

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

SAFETY SLIDE LOCK TRACTOR YOKE PART DIM "A" BORE

A-101-3506 A-101-3520 A-101-3521 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-3506 A-102-3518 A-102-3520 A-102-3521 A-102-3528

DIM "A" BORE

1 3/8" x 6 Spl.

DIM "B" BORE

1 1/8" Hex

1 3/4" x 20 Spl. 1 3/8" x 21 Spl. 1 3/4" x 6 Spl.

BALL SHEAR DEVICE TRACTOR YOKE With Safety Slide Lock PART DIM "A" BORE

A-104-3506 A-104-3520 A-104-3521 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

SHEAR BOLT

(2) 3/8" - 16 Gr. 5 (2) 3/8" - 16 Gr. 5 (2) 3/8" - 16 Gr. 5

AUTO-LOK TRACTOR YOKE PART

A-110-3506 A-110-3520 A-110-3521

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

35 SERIES

CROSS & BEARING KIT Snap Ring Located in Yoke PART

A-200-3500

DIM "A"

1 1/4"

DIM "B"

3 7/32"

SHAFT WELD YOKE With Bearing Groove PART

A-300-3500 A-301-3500 A-302-3500

DIM "A" BORE

1 3/16" Sq.

DIM "B" BORE

1 5/16" x 20 Spl. 1 11/16" x 20 Spl.

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

1 3/16" SQUARE SHAFT

DRIVELINE COMPONENTS

PART

A-400-0019 A-401-0019 A-404-0019

LENGTH

6' 10' 3'

SPLINE SHAFT Induction Hardened PART

A-404-2120 A-404-2720

DIM "A"

1 5/16" x 20 Spl. 1 11/16" x 20 Spl.

LENGTH

3' 3'

SLIP SLEEVE With Grease Groove PART

A-500-3500 A-501-3500 A-504-3500 A-505-3500

LENGTH

5" 5" 8" 5"

DIM "A" BORE

1 3/16" Sq. 1 3/16" Sq. 1 5/16" Sq.

DIM "B" BORE

FITS TUBE

2 1/8" (.120 Wall) 2 1/8" (.083) & 2 1/4" (.120) 2 1/2" (.120 Wall) 2 1/2" (.120 Wall)

1 11/16" x 20 Spl.

SPLINE SLEEVE With Grease Reservoir PART

A-502-3500 A-503-3500

LENGTH

8" 8"

DIM "A" BORE

1 5/16" x 20 Spl. 1 11/16" x 20 Spl.

FITS TUBE

2 1/8" (.120 Wall) 2 1/2"(.120 Wall)

TUBE PART

A-602-3500 A-602-3501 A-603-3500 A-604-3500

DIM "A"

2 1/8" (.120 Wall) 2 1/8" (.083 Wall) 2 1/8" (.120 Wall) 2 1/8" (.120 Wall)

LENGTH

6' 6' 10' 3'

TUBE WELD YOKE With Bearing Groove PART

A-701-3500 A-702-3500 A-703-3500 A-704-3500 A-705-3500

FITS TUBE

2 1/8" (.120 Wall) 2 1/8" (.083 Wall) 2 1/4" (.120 Wall) 2 1/2" (.120 Wall) 2 1/8" (.120 Wall)

35 SERIES

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-3516 A-800-3518 A-800-3519 A-800-3520 A-800-3522 A-800-3523 A-800-3524 A-8003524H A-800-3526 A-800-3528

DIM "A" BORE

1" 1 1/8" 1 3/16" 1 1/4" 1 3/8" 1 7/16" 1 1/2" 1 1/2" 1 5/8" 1 3/4"

STD. KEYWAY

1/4" 1/4" 1/4" 1/4" 5/16" 3/8" 3/8" 3/8" with Pinhole 3/8" 3/8"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

SPLINE BORE IMPLEMENT YOKE With Pin Hole PART

A-801-3506 A-801-3521

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

PIN HOLE

21/64" 21/64"

DRIVELINE COMPONENTS

SHEAR PIN IMPLEMENT YOKE With Pin Hole PART

A-802-3520 A-802-3522 A-802-3524

DIM "A" BORE

1 1/4" 1 3/8" 1 1/2"

PIN HOLE

1/4" 1/2" 1/4"

TORQUE LIMITER FLANGE IMPLEMENT YOKE (Fits Great Lakes Clutch) PART

A-803-3500

SQUARE BORE IMPLEMENT YOKE With Set Screw PART

A-804-3516 A-804-3518 A-804-3519 A-804-3520 A-804-3524 A-804-3526

DIM "A" BORE

1" 1 1/8" 1 3/16" 1 1/4" 1 1/2" 1 5/8"

ROUND BORE IMPLEMENT YOKE Double Keyway & Set Screw PART

A-806-3520 A-806-3522

DIM "A" BORE

1 1/4" 1 3/8"

DBL. KEYWAY

1/4" & 5/16" 5/16" & 3/8"

CLAMP YOKE IMPLEMENT YOKE PART

A-807-3520 A-807-3521 A-807-3527

DIM "A" BORE

1 3/4" x 20 Spl. 1 3/8" x 21 Spl. 1 3/4" x 27 Spl.

35 SERIES

STOCK BORE IMPLEMENT YOKE With Hub O. D. Turned PART

A-809-3516

DIM "A" BORE

1"

PLASTIC GUARD With Bearings (920-3500 & 920-5084 - assembly instructions included with guard) When installing Metal or Plastic Guards observe the following: 1) Install proper nylon bearing and retainer 2) Check to insure guards turn freely on bearing PART OVERALL LENGTH

A-900-3531 A-900-3535 A-900-3548 A-900-3560 31" 35" 48" 60" A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

METAL GUARD With Bearings (920-1200 and 920-4N16 - assembly instructions included with guard) When installing Metal or Plastic Guards observe the following: 1) Install proper nylon bearing and retainer 2) Check to insure guards turn freely on bearing PART OVERALL LENGTH

A-901-3548 A-901-3572 48" 72"

YOKE & SHAFT ASSEMBLY 1 3/16" SQUARE SHAFT PART CL. TO END

A-10003531 A-10003535 A-10003542 A-10003548 A-10003560 17.69" 21.69" 28.69" 33.19" 44.94"

YOKE, TUBE & SLEEVE ASSEMBLY 1 3/16" SQUARE PART CL. TO END

A-11003531 A-11003535 A-11003543 A-11003548 A-11003560 17.69" 21.69" 29.69" 34.69" 46.69"

UNIVERSAL JOINT Quick Disconnect to Shaft Weld Yoke PART

A-15063500

DIM "A" BORE

1 3/8" x 6 Spl.

DIM "B" BORE

1 3/16" Sq.

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 31". PART TRACTOR YOKE COMPRESSED LENGTH

A-14003531 A-14003535 A-14003548 A-14003560 1 3/8" x 6 Spl. 31" 1 3/8" x 6 Spl. 35" 1 3/8" x 6 Spl. Quick Disconnect 48" 1 3/8" x 6 Spl. Quick Disconnect 60"

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 18". PART COMPRESSED LENGTH

A-14013548 A-14013560 A-14023539 A-14023548 48" 60" 39" 48"

35 SERIES

COMPLETE DRIVELINE PART

A-14003507 A-14003524 A-14003536

TRACTOR YOKE

IMPLEMENT YOKE

COMPRESSED LENGTH APPL.

7 ft. Pull Type Rotary Cutter Pumps All Purpose

1 3/8" x 6 Spl. Quick Disconnect 1 3/8" Round 1/2" Shear Pin Hole 64 7/8" 1 3/8" x 6 Spl. Quick Disconnect 1 1/2" Round 3/8" Keyway 48" 1 3/8" x 6 Spl. Safety Slide Lock 1 3/8" x 6 Spl. Safety Slide Lock 36"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

44 SERIES

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

SAFETY SLIDE LOCK TRACTOR YOKE PART DIM "A" BORE

A-101-4406 A-101-4420 A-101-4421 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-4406 A-102-4420 A-102-4421

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

BALL SHEAR DEVICE TRACTOR YOKE With Safety Slide Lock PART DIM "A" BORE

A-104-4406 A-104-4420 A-104-4421 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

SHEAR BOLT

(2) 3/8" x 16 Gr. 5 (2) 3/8" x 16 Gr. 5 (2) 3/8" x 16 Gr. 5

AUTO-LOK TRACTOR YOKE PART

A-110-4406 A-110-4420 A-110-4421

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

44 SERIES

CROSS & BEARING KIT Snap Ring Located in Bushing PART

A-200-4400

DIM "A"

1 5/16"

DIM "B"

4"

SHAFT WELD YOKE With Bearing Groove PART

A-300-4400 A-302-4400 A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DIM "A" BORE

1 5/16" Sq.

DIM "B" BORE

1 11/16"x 20 Spl.

1 5/16" SQUARE SHAFT PART

A-400-0021 A-401-0021 A-404-0021

DRIVELINE COMPONENTS

LENGTH

6' 10' 3'

SPLINE SHAFT Induction Hardened PART

A-404-2120 A-404-2720

DIM "A"

1 5/16" x 20 Spl. 1 11/16" x 20 Spl.

LENGTH

3' 3'

SLIP SLEEVE With Grease Groove PART

A-500-4400 A-505-3500

LENGTH

5" 5"

DIM "A" BORE

1 11/16" x 20 Spl.

DIM "B" BORE

1 5/16" Sq.

FITS TUBE

2 1/2" (.120 Wall) 2 1/2" (.120 Wall)

SPLINE SLIP SLEEVE With Grease Reservoir PART

A-502-3500 A-503-3500 A-504-3500

DIM "A" BORE

1 5/16" x 20 Spl. 1 11/16" x 20 Spl.

DIM "B" BORE

LENGTH

8" 8" 8"

FITS TUBE

2 1/2" (.120 Wall) 2 1/2" (.120 Wall) 2 1/2" (.120 Wall)

1 5/16" Sq.

2 1/2"TUBE (.120 WALL) PART

A-602-4400 A-603-4400 A-604-4400

LENGTH

6' 10' 3'

TUBE WELD YOKE With Bearing Groove PART

A-701-4400 A-702-4400

FITS TUBE

2 1/2" (.120 Wall) 2 1/2" (.120 wall)

44 SERIES

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-4420 A-800-4422 A-800-4423 A-800-4424 A-800-4426 A-800-4428 A-800-4432

DIM "A" BORE

1 1/4" 1 3/8" 1 7/16" 1 1/2" 1 5/8" 1 3/4" 2"

STD. KEYWAY

1/4" 5/16" 3/8" 3/8" 3/8" 3/8" 1/2"

SPLINE BORE IMPLEMENT YOKE With Pin Hole PART

A-801-4406 A-801-4421

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

PIN HOLE

21/64" 21/64" A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

TORQUE LIMITER FLANGE IMPLEMENT YOKE (Fits Great Lakes Clutch) PART

A-803-4400

SQUARE BORE IMPLEMENT YOKE With Set Screw PART

A-804-4418

DIM "A" BORE

1 1/8"

ROUND BORE IMPLEMENT YOKE Double Keyway & Set Screw PART

A-806-4420 A-806-4422 A-806-4424

DIM "A" BORE

1 1/4" 1 3/8" 1 1/2"

DBL. KEYWAY

5/16" & 1/4" 5/16" & 1/4" 5/16" & 3/8"

IMPLEMENT CLAMP YOKE PART

A-807-4406 A-807-4420 A-807-4421 A-807-4427

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl. 1 3/4" x 27 Spl.

STOCK BORE IMPLEMENT YOKE With hub O.D. Turned PART

A-809-4416

DIM "A" BORE

1"

44 SERIES

PLASTIC GUARD With Bearings (920-4400) When installing Metal or Plastic Guards observe the following: 1) Install proper nylon bearing and retainer 2) Check to insure guards turn freely on bearing PART OVERALL LENGTH

A-900-4448 A-900-4460 48" 60"

METAL GUARD With Bearings (920-4400) When installing Metal or Plastic Guards observe the following: 1) Install proper nylon bearing and retainer 2) Check to insure guards turn freely on bearing PART OVERALL LENGTH

A-901-4448 A-901-4472 A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. 48" 72"

YOKE & SHAFT ASSEMBLY PART

A-10004448 A-10004460 A-10014448

DIM "A" BORE

1 5/16" Sq. 1 5/16" Sq.

DIM "B" BORE

CL. TO END

DRIVELINE COMPONENTS

1 11/16" x 20 Spl.

33.12" 45.12" 33.12"

YOKE, TUBE & SLEEVE ASSEMBLY PART

A-11004448 A-11004460 A-11014448

DIM "A" BORE

1 5/16" Sq. 1 5/16" Sq.

DIM "B" BORE

CL. TO END

35.62" 45.62" 35.62"

1 11/16" x 20 Spl.

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART SHAFT TRACTOR YOKE COMPRESSED LENGTH

A-14004448 A-14004460 A-14044448 1 5/16" 1 5/16" 1 11/16" x 20 Spl. 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. SSL 48" 60" 48"

COMPLETE DRIVELINE PART

A-14014448 A-14014460 A-14054448

SHAFT

1 5/16" 1 5/16" 1 11/16" x 20 Spl.

COMPRESSED LENGTH

48" 60" 48"

COMPLETE DRIVELINE PART

A-14004424

TRACTOR YOKE

1 3/8" x 6 Spl. Quick Disconnect

IMPLEMENT YOKE

1 1/2" Round 3/8" Keyway

COMPRESSED LENGTH APPL.

48" Pumps

55 SERIES

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

SAFETY SLIDE LOCK TRACTOR YOKE PART DIM "A" BORE

A-101-5506 A-101-5520 A-101-5521 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-5506 A-102-5521 A-102-5528

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 6 Spl.

BALL SHEAR DEVICE TRACTOR YOKE With Safety Slide Lock PART DIM "A" BORE

A-104-5506 A-104-5520 A-104-5521 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

SHEAR BOLT

(2) 3/8" x 16 Gr. 5 (2) 3/8" x 16 Gr. 6 (2) 3/8" x 16 Gr. 7

AUTO-LOK TRACTOR YOKE PART

A-110-5506 A-110-5520 A-110-5521

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

55 SERIES

CROSS & BEARING KIT Snap Ring Located in Yoke PART

A-200-5500

DIM "A"

1 17/32"

DIM "B"

4 5/16"

SHAFT WELD YOKE With Bearing Groove PART

A-300-5500 A-301-5500 A-302-5500

DIM "A" BORE

1 5/16" Sq. 1 3/16" Sq.

DIM "B" BORE

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

1 11/16" x 20 Spl.

1 5/16" SQUARE SHAFT

DRIVELINE COMPONENTS

PART

A-400-0021 A-401-0021 A-404-0021

LENGTH

6' 10' 3'

1 11/16" X 20 SPLINE SHAFT Induction Hardened PART

A-404-2120 A-404-2720

DIM "A"

1 5/16" x 20 1 11/16" x 20 Spl.

LENGTH

3' 3'

SLIP SLEEVE With Grease Groove PART

A-500-4400 A-505-3500

DIM "A" BORE

1 11/16" x 20 Spl.

DIM "B" BORE

1 5/16" Sq.

LENGTH

5" 5"

FITS TUBE

2 1/2" (.120 Wall) 2 1/2" (.120 Wall)

SLIP SLEEVE With Grease Reservoir PART

A-502-3500 A-503-3500 A-504-3500

DIM "A" BORE

1 5/16" x 20 Spl. 1 11/16" x 20 Spl.

DIM "B" BORE

LENGTH

8" 8" 8"

FITS TUBE

2 1/2" (.120 Wall) 2 1/2" (.120 Wall) 2 1/2" (.120 Wall)

1 5/16" Sq.

2 1/2"TUBE (.120 WALL) PART

A-602-4400 A-603-4400 A-604-4400

LENGTH

6' 10' 3'

TUBE WELD YOKE With Bearing Groove PART

A-701-5500 A-704-5500

FITS TUBE

2 1/2" (.120 wall) 2 1/2" (.120 wall)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-5522 A-800-5524 A-800-5526 A-800-5528 A-800-5532

DIM "A" BORE

1 3/8" 1 1/2" 1 5/8" 1 3/4" 2"

STD. KEYWAY

5/16" 3/8" 3/8" 3/8" 1/2"

55 SERIES

SPLINE BORE IMPLEMENT YOKE With Pin Hole PART

A-801-5506

DIM "A" BORE

1 3/8" x 6 Spl.

PIN HOLE

21/64"

CLAMP YOKE IMPLEMENT YOKE PART

A-807-5506 A-807-5520 A-807-5521 A-807-5527

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl. 1 3/4" x 27 Spl. A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

STOCK BORE IMPLEMENT YOKE With Hub O.D. Turned PART

A-809-5516

DIM "A" BORE

1"

PLASTIC GUARD With Bearings (920-4400) When installing Metal or Plastic Guards observe the following: 1) Install proper nylon bearing and retainer 2) Check to insure guards turn freely on bearing PART OVERALL LENGTH

A-900-4448 A-900-4460 48" 60"

METAL GUARD With Bearings (920-4400) When installing Metal or Plastic Guards observe the following: 1) Install proper nylon bearing and retainer 2) Check to insure guards turn freely on bearing PART OVERALL LENGTH

A-901-4448 A-901-4472 48" 72"

YOKE & SHAFT ASSEMBLY PART

A-10005548 A-10005560 A-10015548

SHAFT SIZE

1 5/16" 1 5/16" 1 11/16" x 20 Spl.

CL. TO END

32.76" 44.88" 32.75"

YOKE, TUBE & SLEEVE ASSEMBLY PART

A-11005548 A-11005560 A-11015548

DIM "A" BORE

1 5/16" Sq. 1 5/16" Sq.

DIM "B" BORE

CL. TO END

33.38" 45.38"

1 11/16" x 20 Spl.

55 SERIES

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART SHAFT TRACTOR YOKE COMPRESSED LENGTH

A-14005548 A-14005560 A-14045548 1 5/16" 1 5/16" 1 11/16"x20 Spl. 1 3/8" x 6 Spl. Quick Disconnect 48" 1 3/8" x 6 Spl. Quick Disconnect 60" 1 3/8" x 6 Spl. Safety Slide Lock 48"

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART SHAFT COMPRESSED LENGTH

A-14015548 A-14015560 A-14055548 A-14055558 1 5/16" Sq. 1 5/16" Sq. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 48" 60" 48" 58"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

COMPLETE DRIVELINE PART

A-14005537 A-14005542 A-14005545 A-14005546

TRACTOR YOKE

IMPLEMENT YOKE

COMPRESSED LENGTH APPL.

All Purpose 42" All Purpose 45" All Purpose 46" All Purpose

DRIVELINE COMPONENTS

1 3/8" x 6 Spl. Safety Slide Lock 1 3/8" x 6 Spl. Safety Slide Lock 37" 1 3/8" x 21 Spl. Safety Slide Lock 1 1/2" Rd. w/ KW, (2) Set Screws & Pinhole 1 3/8" x 21 Spl. Safety Slide Lock 1 1/2" Rd. w/ KW and (2) Set Screws 1 3/4" x 20 Spl. Safety Slide lock 1 3/4" Rd. w/ KW and (2) Set Screws

W SERIES

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

SPRING-LOK TRACTOR YOKE PART

A-100-0706

DIM "A" BORE

1 3/8" x 6 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-0706

DIM "A" BORE

1 3/8" x 6 Spl.

PIN & BLOCK STYLE CROSS & BEARING KIT Zerk Located in Block PART DIM "A"

A-200-0700 9/16"

DIM "B"

1 1/2"

SHAFT WELD YOKE With Bearing Groove PART

A-300-0700

DIM "A" BORE

15/16" Sq.

W SERIES

15/16" SQUARE SHAFT PART

A-400-0015

LENGTH

6'

FITS TUBE

1 1/4" Sq.

1 1/4" SQUARE TUBE PART

A-600-0015

LENGTH

6'

FITS SHAFT

15/16" Sq.

TUBE WELD YOKE With Bearing Groove PART

A-700-0700

DIM "A"

15/16" Sq.

FITS TUBE

1 1/4"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-0716 A-800-0720

DIM "A" BORE

1" 1 1/4"

STD. KEYWAY

1/4" 1/4"

DRIVELINE COMPONENTS

PLASTIC GUARD With Bearings (920-0141) When installing Metal or Plastic Guards observe the following: 1) Install proper nylon bearing and retainer 2) Check to insure guards turn freely on bearing PART OVERALL LENGTH

A-900-0748 48"

COMPLETE DRIVELINE PART

A-14000700 A-14000748

TRACTOR YOKE

1 3/8" x 6 Spring Lok 1 3/8" x 6 Spring lok

IMPLEMENT YOKE

1 1/4" Round 1/4" Keyway No Implement Yoke & Cross Kit

COMPRESSED LENGTH APPL.

48" 48" Post Hole Digger All Purpose

675 SERIES (INTERCHANGES WITH NEAPCO)

SPRING-LOK TRACTOR YOKE PART

A-100-0506

DIM "A" BORE

1 3/8" x 6 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-0506

DIM "A" BORE

1 3/8" x 6 Spl.

CROSS & BEARING KIT Snap Ring Located in Bushing PART

A-200-0675

DIM "A"

15/16"

DIM "B"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. 2 5/16"

DRIVELINE COMPONENTS

SHAFT WELD YOKE With Bearing Groove PART

A-300-0500

DIM "A" BORE

3/4" x 7/8"

TUBE WELD YOKE With Bearing Groove PART

A-700-0500

DIM "A" BORE

1" x 1 1/8"

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-0512

DIM "A" BORE

3/4"

STD. KEYWAY

3/16"

SPLINE BORE IMPLEMENT YOKE With Pin Hole PART

A-801-0506

DIM "A" BORE

1 3/8" x 6 Spl.

PIN HOLE

5/8"

SQUARE BORE IMPLEMENT YOKE With Set Screw PART

A-804-0512 A-804-0514

DIM "A" BORE

3/4" 7/8"

675 SERIES (INTERCHANGES WITH NEAPCO)

ROUND BORE IMPLEMENT YOKE With Double Keyway & Set Screw PART

A-806-0514 A-806-0516 A-806-0518 A-806-0520

DIM "A" BORE

7/8" 1" 1 1/8" 1 1/4"

DBL. KEYWAY

3/16" & 1/4" 3/16" & 1/4" 1/4" & 5/16" 1/4" & 5/16"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

1000 SERIES (INTERCHANGES WITH SPICER)

QUICK DISCONNECT TRACTOR YOKE PART

A-102-1006

DIM "A" BORE

1 3/8" x 6 Spl.

CROSS & BEARING KIT Snap Ring Located in Bushing PART

A-200-1000

DIM "A"

15/16"

DIM "B"

2 21/64"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

HEXAGON BORE IMPLEMENT YOKE With Set Screw PART

A-805-1014 A-805-1018

DIM "A"

7/8" 1 1/8"

ROUND BORE IMPLEMENT YOKE With Double Keyway & Set Screw PART

A-806-1014 A-806-1016 A-806-1020

DIM "A" BORE

7/8" 1" 1 1/4"

DBL. KEYWAY

3/16"&1/4" 3/16"&1/4" 1/4" & 5/16"

SQUARE SLIP SLEEVE YOKE PART

A-808-1012 A-808-1014

DIM "A" BORE

3/4" 7/8"

ROUND SLIP SLEEVE YOKE With Keyway PART

A-810-1012 A-810-1013 A-810-1014 A-810-1016 A-810-1018 A-810-1020

DIM "A" BORE

3/4" 13/16" 7/8" 1" 1 1/18" 1 1/4"

KEYWAY

3/16" 1/4" 1/4" 1/4" 1/4" 1/4"

HEXAGON SLIP SLEEVE YOKE PART

A-811-1014 A-811-1018

DIM "A" BORE

7/8" 1 1/8"

SPLINE SLIP SLEEVE YOKE PART

A-812-1018

DIM "A" BORE

1 1/8" x 10 Spl.

RECTANGULAR SLIP SLEEVE YOKE PART

A-813-1012

DIM "A" BORE

3/4" x 7/8"

1800 SERIES (INTERCHANGES WITH NEAPCO)

CROSS & BEARING KIT Snap Ring Located in Bushing PART

A-200-1875

DIM "A"

1"

DIM "B"

3 7/16"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DIM "B" DIM "A" CROSS & BEARING KIT Snap Ring Located in Yoke

1 FR SERIES

A-200-0100

PART

7/8"

2 15/16"

DRIVELINE COMPONENTS

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

CROSS & BEARING KIT Snap Ring Located in Yoke PART

1" 3 15/16" A-200-0300

DIM "A" DIM "B"

3 DR SERIES

DRIVELINE COMPONENTS

VEHICULAR

CROSS & BEARING KIT PART

A-200-0310 A-200-0350 A-200-0410

SPICER U-JOINT SERIES

1310 1350 1410

DIM "A"

1 1/16" 1 3/16" 1 3/16"

DIM "B"

3 7/32" 3 5/8" 4 3/16"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

2600 SERIES

QUICK DISCONNECT TRACTOR YOKE PART

A-102-2606 A-102-2620 A-102-2621

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located in Yoke PART

A-200-2600

DIM "A"

1 3/8"

DIM "B"

4 3/16"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

SHAFT WELD YOKE With Bearing Groove PART

A-300-2600

DRIVELINE COMPONENTS

DIM "A" BORE

1 5/16" Sq.

1 5/16" SQUARE SHAFT PART

A-400-0021 A-401-0021 A-404-0021

LENGTH

6' 10' 3'

1 5/16" SQUARE SLIP SLEEVE With Grease Groove PART

A-500-2600

LENGTH

5"

FITS TUBE

2 3/4" (.109 Wall)

2 3/4"TUBE (.109 WALL) PART

A-602-2600

LENGTH

6'

TUBE WELD YOKE With Bearing Groove PART

A-701-2600

FITS TUBE

2 3/4" (.109 Wall)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-2624 A-800-2628

DIM "A" BORE

1 1/2" 1 3/4"

STD. KEYWAY

3/8" 3/8"

PLASTIC GUARD With Bearings (920-2600) When installing Metal or Plastic Guards observe the following: 1) Install proper nylon bearing and retainer 2) Check to insure guards turn freely on bearing PART OVERALL LENGTH

A-900-2648 48"

Shafting

Stock Number A-400-0012 A-400-0015 A-400-0016 A-400-0019 A-400-0020 A-400-0021 A-400-1214 A-400-1618 A-401-0019 A-401-0021 A-401-1214 A-401-1618 A-402-0016 A-402-0018 A-402-0020 A-404-0019 A-404-0021 A-404-1214 A-404-1615H A-404-1618 A-404-2120 A-404-2720

Shock Absorbing Flexible Coupling Disc

6" O.D.

Length 6' 6' 6' 6' 6' 6' 6' 6' 10' 10' 10' 10' 6' 6' 6' 3' 3' 3' 3' 3' Stock Number A-970-2110 A-970-2108

Size 3/4" Sq. 15/16" Sq. 1" Sq. 1 3/16" Sq. 1 1/4" Sq. 1 5/16" Sq. 3/4" x 7/8" Rect. 1" x 1 1/8" Rect. 1 3/16" Sq. 1 5/16" Sq. 3/4" x 7/8" Rect. 1" x 1 1/8" Rect. 1" Hex 1 1/8" Hex 1 1/4" Hex 1 3/16" Sq. 1 5/16" Sq. 3/4" x 7/8" Rect. 1" x 15 Spl. (Induction Hardened) 1" x 1 1/8" Rect.

Description Disc only w/ 5/8" Holes Disc only w/ 1/2" Holes

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

Friction Disc

1 5/16" x 20 Spl. (Induction Hardened) 3' 1 11/16" x 20 Spl. (Induction Hardened) 3'

Tubing

Stock Number A-600-0012 A-600-0015 A-600-0016 A-600-0020 A-600-1618 A-600-2022 A-601-1618 A-601-2022 A-602-0600 A-602-1400 A-602-2600 A-602-3500 A-602-3501 A-602-4400 A-603-1400 A-603-3500 A-603-4400 A-604-0600 A-604-1400 A-604-1618 A-604-2022 A-604-3500 A-604-4400

Stock Number

Outer Diameter

Inner Diameter 3 1/2"

Thickness 1/8"

A-970-6000 5.247" (For clutch disc see Clutch Section) Size 1" Sq. 1 1/4" Sq. (.120 wall) 1 1/4" Sq. (.109 wall) 1 5/8" Sq. 3/4" x 7/8" Rect. 1 1/4" x 1 3/8" Rect. 3/4" x 7/8" Rect. 1 1/4" x 1 3/8" rect. 1 1/2" Rd. 2" Rd. (.083 wall) 2 3/4" Rd. (.109 wall) 2 1/8" Rd. (.120 wall) 2 1/8" Rd. (.083 wall) 2 1/2" Rd. (.120 wall) 2" Rd. (.083 wall) 2 1/8" Rd. (.120 wall) 2 1/2" Rd. (.120 wall) 1 1/2" Rd. 2" Rd. (.083 Wall) 3/4" x 7/8" Rect. 1 1/4" x 1 3/8" Rect. 2 1/3" Rd. (.120 Wall) 2 1/2" Rd. (.120 wall) Length 6' 6' 6' 6' 6' 6' 10' 10' 6' 6' 6' 6' 6' 6' 10' 10' 10' 3' 3' 3' 3' 3' 3'

Nylon Bearing Repair Kit

(Kit includes nylon bearing and retainer) NOTE! Not all guard and bearing systems are interchangeable. When purchasing shaft weld and tube weld yokes or guards, make certain there is a proper fit between nylon bearing raceway in yoke and guard. The nylon bearings provided with our replacement guards are the most popular in the replacement market. If the nylon bearing provided with the guard is not a proper fit, it is essential that the proper nylon is identified and installed to insure proper performance and safety. To assist in ordering the proper nylon, listed below are stock numbers and dimensions for our standard aftermarket and OEM nylons.

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

A

A

DRIVELINE COMPONENTS

B

C

Stock Number A-920-0017 A-920-0069 A-920-0085 A-920-0102 A-920-0141 A-920-0165 A-920-0195 A-920-0254 A-920-0259 A-920-0260 A-920-0600 A-920-1200 A-920-2600 A-920-3500 A-920-4400 A-920-4P15 A-920-4P16 A-920-5071 A-920-5084 A-920-4N15 A-920-4N16

Dim. "A" Yoke Raceway O.D. Nylon Bearing I.D. 2 1/8" 1 3/4" 2" 1 3/8" 1 5/8" 2 1/8" 1 3/4" 1 5/8" 2" 2 17/32" 1 13/16" 2 1/16" 2 7/8" 2 1/16" 2 5/8" 1 21/32" 1 25/32" 2 1/32" 2 5/32" 1 61/64" 2 1/8" (2.125") (1.75") (2.0") (1.375") (1.625") (2.125") (1.75") (1.625") (2.0") (2.530) (1.825") (2.0625") (2.875") (2.0625") (2.625") (1.646") (1.770") (2.021") (2.146") (1.947") (2.125")

Dim. "B" Yoke Raceway Width Nylon Bearing Width 3/8" 3/8" 3/8" 11/32" 11/32" 3/8" 3/8" 11/32" 3/8" 33/64" 9/32" 11/32" 11/32" 11/32" 3/8" 11/32" 11/32" 11/32" 11/32" 9/32" 21/64" (.375") (.375") (.375") (.3437") (.3437") (.375") (.375") (.3437") (.375") (.358) (.2812") (.3437") (.3437") (.3437") (.375") (.358") (.358") (.358") (.358") (.291") (.341")

Dim. "C" Nylon Bearing O.D. 2 3/4" 2 3/4" 2 3/4" 2" 2 3/4" 3 1/4" 2 1/2" 2 1/4" 1/4" 3 2 49/64" 2 3/4" 2 3/4" 3 9/16" 2 3/4" 3 1/4" 2 3/4" 2 3/4" 2 3/4" 2 3/4" 2 1/4" 2 1/2" (2.75") (2.75") (2.75") (2.0") (2.75") (2.25") (2.50") (2.25") (3.25") (2.770) (2.75") (2.75") (3.5625") (2.75") (3.25") (2.76") (2.76") (2.76") (2.76") (2.25") (2.50")

NOTE! 6, 12, 14, 35 Series North American guards will be provided with (2) sets of nylon bearings. To help assure the proper set of nylon bearings are installed, one bearing set will be exactly the same (bearing raceway dimensions) as has always been provided in our aftermarket guards. The other set will be dimensioned to retrofit the Weasler OEM raceway. Assembly instructions included with these guards.

Locking Device

Safety Slide Lock*

An exclusive Weasler replacement component, the Safety Slide Lock* yoke is locked in place by two hardened pawls with compound radii that conform to the groove in the shaft for full contact. The device is particularly applicable where there is appreciable end thrust.

Spring-Lok*

The collar is spring loaded for ease of installation and positive locking to tractor shaft.

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DRIVELINE COMPONENTS

Quick Disconnect

A smooth plunger eliminates sharp projections such as x-washers. Trails rather than leads rotation. *Exclusive products of Weasler Engineering

Locking Device Repair Kit

*Auto-Lok/Safety Slide Lock

Stock No. A-13004000 Repair Kit for Weasler Auto-Lok and Safety Slide Lock 6 Spline & 21 Spline Repair Kit for Weasler Auto-Lok and Safety Slide Lock 20 Spline

Stock No. A-13004020

* This repair kit contains both balls & pawls. When repairing the "Safety Slide Lock" use the balls only and discard the pawls. When repairing the "Auto-Lok" use both the balls and the pawls.

Spring-Lok

Stock No. A-13003100 Repair Kit for Weasler Spring-Lok 6 Spline & 21 Spline 1" x 15 Spline

Stock No. A-13003115

Quick Disconnect

Stock No. A-13002006 Stock No. A-13002806 Stock No. A-13002021 Stock No. A-13002020 Repair Kit for Weasler and Rockwell 6 Spline Repair Kit for 1 3/4" x 6 Spl. Weasler 21 Spline and Hex Quick Disconnect Weasler 20 Spline

Bearing

960

Implement Yoke

800

Guard

900

Bearing

960

Cross & Bearing Kit

200

Outer Profile Yoke

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

Outer Tube Cross & Bearing Kit

200 400 600

700

Roll Pin

508

Inner Tube

DRIVELINE COMPONENTS

Roll Pin

508

Tractor Yoke

102

Inner Profile Yoke

300

Each series has an exploded view for identification purposes. The drawing illustrates the components in the same sequence as an implement input driveline transmitting power from tractor to implement. Each component of the exploded view is identified by an eight-digit stock number to insure correct identification of each component. Example: For metric components the 102 prefix denotes a Quick Disconnect Tractor Yoke on the exploded view. When ordering any component in the exploded view (for any series), be sure the stock number begins with the appropriate three-digit prefix. The digit immediately following the dash (-) will be a 6, 7 or 8. A 6 indicates the item is interchangeable with Bondioli & Pavesi ONLY. A 7 indicates the item is interchangeable with Walterscheid ONLY. An 8 indicates the item is interchangeable with BOTH Bondioli & Pavesi AND Walterscheid. This interchangeability designation is used for all components EXCEPT roll pins and guard bearings. The following chart lists the approximate size replacement for Metric Driveline. These are not an exact interchange, and should be used as a general replacement guide only.

CROSS & BEARING KIT CROSS REFERENCE CHART FOR METRIC COMPONENTS

Cross & Bearing Kit Stock # _____________ A-200-6154 A-200-6580 A-200-6794 A-200-6806 A-200-6908 A-200-7004 A-200-7155 A-200-7676 A-200-7890 A-200-7989 A-200-8261 A-200-8370 A-200-8474 A-200-8692 A-200-8706 A-200-7276 A-200-7491 A-200-7694 A-200-7906 Interchanges with Bondioli & Pavesi Series __________________ 1 5 7N 8 9 ­ ­ ­ ­ ­ 2 3 4 6 7 (Old Series) ­ ­ ­ ­ Interchanges with Walterscheid Series ______________ ­ ­ ­ ­ ­ 2600 2100 2400 II 2500 2200 I 2300 220 230 2280 2380 2480 2580

DRIVELINE REPLACEMENT CHART

Weasler Series ____________ 6 12 14 Replacement for: ______________ Bondioli & Pavesi 1 & 2 Series Walterscheid 2100 & 2200 Series Bondioli & Pavesi 3 Series Walterscheid I Series Bondioli & Pavesi 4 Series Walterscheid 2300 Series Weasler Series ____________ 35 44 55 Replacement for: ______________ Bondioli & Pavesi 5 Series Walterscheid 220 & 2400 Series Bondioli & Pavesi 6 & 7 Series Walterscheid II Series Bondioli & Pavesi 8 & 9 Series Walterscheid 2500 & 2600 Series

1 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-6106

DIM "A" BORE

1 3/8" x 6 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-6118 A-102-6106 A-102-6121

DIM "A" BORE

1-1/8" x 6 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-6154

DIM "A" MM

22.0

IN

7/8" (.866)

DIM "B" MM

54.0

IN

2 1/8" (2.126)

INNER PROFILE YOKE With Bearing Groove PART

A-300-6126

DIM "A" MM

26.0

IN

1 1/32" (1.024)

1 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

26.0 (3.5 WALL) MM 1.024 (.138 WALL)" INNER TUBE PART LENGTH MM

A-400-6126 A-404-6126 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

ROLL PIN PART

A-508-0850

DIM "A" MM

8.0

IN

5/16" (.315)

DIM "B" MM

50.0

IN

1 31/32" (1.969)

33.0 (2.6 WALL) MM 1.299 (.102 WALL)" OUTER TUBE PART LENGTH MM

A-600-6133 A-604-6133 A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

OUTER PROFILE YOKE With Bearing Groove PART

A-700-6133

METRIC DRIVELINE SERIES

DIM "A" BORE MM

33.0

IN

1 5/16" (1.299)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-6108 A-800-6110 A-800-6130

DIM "A" BORE MM

25.4 31.75 30.0

IN

1" (1.0) 1 1/4" (1.250) 1 3/16" (1.18)

STD. KEYWAY MM

6.35 6.35 10.0

IN

1/4" (.250) 1/4" (.250) 25/64" (.394)

SHEAR PIN IMPLEMENT YOKE With Pin Hole PART

A-802-6110

DIM "A" BORE MM

31.75

IN

1 1/4" (1.250)

PLASTIC GUARD Order Bearings as Required PART

A-900-8134 A-900-8148 A-900-8154

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0101 960-0101 960-0101

EASY LOCKTM PART

A-13005000

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART TRACTOR YOKE COMPRESSED LENGTH

A-14046148 1 3/8" x 6 Spl. QD 48"

2 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-8206

DIM "A" BORE

1 3/8" x 6 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-8218 A-102-8206 A-102-8221

DIM "A" BORE

1 1/8" x 6 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-8261

DIM "A" MM

23.8

IN

15/16" (.937)

DIM "B" MM

61.2

IN

2 13/32" (2.409)

INNER PROFILE YOKE With Bearing Groove PART

A-300-6229

DIM "A" MM

29

IN

1 5/32" (1.142)

29.0 (3.4 WALL) MM 1.142 (.134 WALL)" INNER TUBE PART LENGTH MM

A-400-6229 A-404-6229 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

2 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

ROLL PIN PART

A-508-0860

DIM "A" MM

8

IN

5/16" (.315)

DIM "B" MM

60.0

IN

2 3/8" (2.362)

36.0 (3.4 WALL) MM 1.417 (.134 WALL)" OUTER TUBE Can be used as 400-6336 (Inner Tube) PART LENGTH MM

A-600-6236 A-604-6236 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

OUTER PROFILE YOKE With Bearing Groove

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

PART

A-700-6236

DIM "A" MM

36.0

IN

1 13/32" (1.417)

METRIC DRIVELINE SERIES

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-8225 A-800-8208 A-800-8230 A-800-8210 A-800-8211

DIM "A" BORE MM

25.0 25.4 30.0 31.75 34.93

IN

53/64" (.984) 1" (1.00) 1 3/16" (1.181) 1 1/4" (1.25) 1 3/8" (1.375)

STD. KEYWAY MM

8.0 8.0 10.0 9.53 12.7

IN

5/16" (.315) 5/16" (.315) 25/64" (.394) 3/8" (.375) 1/2" (.5)

SHEAR PIN IMPLEMENT YOKE With Pinhole PART

A-802-8220

DIM "A" BORE MM

31.75

IN

1 1/4" Rd (1.25)

PLASTIC GUARD Order Bearings as Required PART

A-900-8234 A-900-8248 A-900-8254

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0202 960-0202 960-0202

EASY LOCKTM PART

A-13005000

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART TRACTOR YOKE COMPRESSED LENGTH

A-14046248 A-14046260 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 48" 60"

3 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-8306

DIM "A" BORE

1 3/8" x 6 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-8306 A-102-8321

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-8370

DIM "A" MM

27.0

IN

1 1/16" (1.063)

DIM "B" MM

70.0

IN

2 3/4" (2.756)

INNER PROFILE YOKE With Bearing Groove PART

A-300-6336

DIM "A" MM

36

IN

1 13/32" (1.417)

3 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

36.0 (3.4 WALL) MM 1.417 (1.134 WALL)" INNER TUBE Can be used as 600-6236 (Outer Tube) PART LENGTH MM

A-400-6336 A-404-6336 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

ROLL PIN PART

A-508-0860

DIM "A" MM

8.0

IN

5/16" (.315)

DIM "B" MM

60.0

IN

2 3/8" (2.362)

43.0 (3.0 WALL) MM 1.693 (.118 WALL)" OUTER TUBE PART LENGTH MM

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. A-600-6343 A-604-6343 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

METRIC DRIVELINE SERIES

OUTER PROFILE YOKE With Bearing Groove PART

A-700-6343

DIM "A" MM

43.0

IN

1 11/16" (1.693)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-8325 A-800-8330 A-800-8310 A-800-8311

DIM "A" BORE MM

25.0 30.0 31.75 34.93

IN

63/64" (.984) 1 3/16" (1.181) 1 1/4" (1.250) 1 3/8" (1.375)

STD. KEYWAY MM

8.0 8.0 6.35 7.95

IN

5/16" (.315) 5/16" (.315) 1/4" (.250) 5/16" (.313)

SHEAR PIN IMPLEMENT YOKE With Pin Hole PART

A-802-8310 A-802-8335

DIM "A" BORE MM

31.75 35.0

IN

1 1/4" 1 3/8" (1.378)

PLASTIC GUARD Order Bearings as Required PART

A-900-8234 A-900-8248 A-900-8254

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0234 960-0234 960-0234

EASY LOCKTM PART

A-13005000

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART TRACTOR YOKE COMPRESSED LENGTH

A-14046348 A-14046360 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 48" 60"

4 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-8406 A-100-8421

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-8406 A-102-8421

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

BALL SHEAR DEVICE TRACTOR YOKE PART DIM "A" BORE

A-104-8406 A-104-8421 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located in Yoke PART

A-200-8474

DIM "A" MM

27.0

IN

1 1/16" (1.063)

DIM "B" MM

74.6

IN

2 15/16" (2.937)

4 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

INNER PROFILE YOKE With Bearing Groove PART

A-300-6436

DIM "A" MM

36.0

IN

1 13/32" (1.417)

36.0 (4.0 WALL) MM 1.417 (.157 WALL)" INNER TUBE PART LENGTH MM

A-400-6436 A-404-6436 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

ROLL PIN PART

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. A-508-0860

DIM "A" MM

8.0

IN

5/16" (.315)

DIM "B" MM

60.0

IN

2 3/8" (2.362)

METRIC DRIVELINE SERIES

43.0 (3.0 WALL) MM 1.693 (.118 WALL)" OUTER TUBE PART LENGTH MM

A-600-6343 A-604-6343 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

OUTER PROFILE YOKE With Bearing Groove PART

A-700-6443

DIM "A" BORE MM

43.0

IN

1 11/16" (1.693)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-8430 A-800-8410 A-800-8411 A-800-8424

DIM "A" BORE MM

30.0 31.75 34.93 44.25

IN

1 3/16" (1.181) 1 1/4" (1.250) 1 3/8" (1.375) 1 1/2" (1.50)

STD. KEYWAY MM

8.0 6.35 7.95 9.53

IN

5/16" (.315) 1/4" (.250) 5/16" (.313) 3/8" (.375)

SHEAR PIN IMPLEMENT YOKE With Pin Hole PART

A-802-8410 A-802-8435

DIM "A" BORE MM

31.75 35.0

IN

1 1/4" (1.25) 1 3/8" (1.378)

CLAMP YOKE IMPLEMENT YOKE PART

A-807-8406

DIM "A" BORE

1 3/8" x 6 Spl.

PLASTIC GUARD Order Bearings as Required PART

A-900-8234 A-900-8248 A-900-8254

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0234 960-0234 960-0234

4 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

EASY LOCKTM PART

A-13005000

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART TRACTOR YOKE COMPRESSED LENGTH

A-14046448 A-14046460 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 48" 60" A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

5 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-6506 A-100-6521

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-6506 A-102-6521 A-102-6520

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl.

BALL SHEAR DEVICE TRACTOR YOKE PART DIM "A" BORE

A-104-6506 A-104-6521 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located in Yoke PART

A-200-6580

DIM "A" MM

30.2

IN

1 3/16" (1.189)

DIM "B" MM

79.4

IN

3 1/8" (3.126)

INNER PROFILE YOKE With Bearing Groove PART

A-300-6545

DIM "A" BORE MM

45.0

IN

1 25/32" (1.772)

5 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

45.0 (4.0 WALL) MM 1.772 (.158 WALL)" INNER TUBE PART LENGTH MM

A-400-6545 A-404-6545 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

ROLL PIN PART

A-508-1075

DIM "A" MM

10.0

IN

13/32" (.394)

DIM "B" MM

75.0

IN

2 15/16" (2.953)

52.0 (3.0 WALL) MM 2.047 (.118 WALL)" OUTER TUBE PART LENGTH MM

A-600-6552 A-604-6552 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37) A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

OUTER PROFILE YOKE With Bearing Groove PART

A-700-6552

DIM "A" BORE MM

52.0

IN

2 1/32" (2.047)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-6510 A-800-6511 A-800-6522 A-800-6524

DIM "A" BORE MM

31.75 34.93 35.0 38.10

IN

1 1/4" (1.250) 1 3/8" (1.375) 1 3/8" (1.378) 1 1/2" (1.5)

STD. KEYWAY MM

6.35 7.95 13.0 9.53

IN

1/4" (.250) 5/16" (.313) 33/64" (.512) 3/8" (.375)

SHEAR PIN IMPLEMENT YOKE With Pin Hole PART

A-802-6535

DIM "A" BORE MM

35.0

IN

1 3/8" (1.378)

PLASTIC GUARD Order Bearings as Required PART

A-900-8534 A-900-8548 A-900-8554

OVERALL LENGTH MM

860 1010 1360

IN

860 1010 1360

BEARING KIT

960-0305 960-0305 960-0305

EASY LOCKTM PART

A-13005000

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART TRACTOR YOKE COMPRESSED LENGTH

A-14046548 A-14046560 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 48" 60"

6 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-8606 A-100-8620 A-100-8621

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-8606 A-102-8621 A-102-8620

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl.

BALL SHEAR DEVICE TRACTOR YOKE PART DIM "A" BORE

A-104-8606 A-104-8621 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-8692

DIM "A" MM

30.2

IN

1 3/16" (1.189)

DIM "B" MM

92.0

IN

3 5/8" (3.622)

6 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

INNER PROFILE YOKE With Bearing Groove PART

A-300-6645

DIM "A" BORE MM

45.0

IN

1 25/32" (1.772)

45.0 (4.0 WALL) MM 1.772 (.158 WALL)" INNER TUBE PART LENGTH MM

A-400-6545 A-404-6545 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

ROLL PIN PART

A-508-1080

DIM "A" MM

10.0

IN

13/32" (.394)

DIM "B" MM

80.0

IN

3 5/32" (3.150) A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

54.0 (4.0 WALL) MM 2.126 (.158 WALL)" OUTER TUBE Can be used as 400-6854 (Inner Tube) PART LENGTH MM

A-600-6654 A-604-6654 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

OUTER PROFILE YOKE With Bearing Groove PART

A-700-6654

DIM "A" BORE MM

54.0

IN

2 1/8" (2.126)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-8610 A-800-8611 A-800-8624

DIM "A" BORE MM

31.75 35.0 38.10

IN

1 1/4" (1.250) 1 3/8" (1.378) 1 1/2" (1.5)

STD. KEYWAY MM

6.35 13.0 9.53

IN

1/4" (.250) 33/64" (.512) 3/8" (.375)

SHEAR PIN IMPLEMENT YOKE With Pin Hole PART

A-802-8611

DIM "A" BORE MM

35.0

IN

1 3/8" (1.378)

CLAMP YOKE IMPLEMENT YOKE PART

A-807-8606 A-807-8620 A-807-8621

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

PLASTIC GUARD Order Bearings as Required PART

A-900-8634 A-900-8648 A-900-8654

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0467 960-0467 960-0467

6 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

EASY LOCKTM PART

A-13005000

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART TRACTOR YOKE COMPRESSED LENGTH

A-14046648 A-14046660 A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 48" 60"

METRIC DRIVELINE SERIES

7N SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-6706 A-100-6720 A-100-6721

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-6706 A-102-6720 A-102-6721

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

BALL SHEAR DEVICE TRACTOR YOKE PART DIM "A" BORE

A-104-6706 A-104-6721 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located in Yoke PART

A-200-6794

DIM "A" MM

34.9

IN

1 3/8" (1.37)

DIM "B" MM

94.0

IN

3 45/64" (3.703)

CROSS & BEARING KIT (AB7) Snap Ring Located in Yoke PART

A-200-8706

DIM "A" MM

30.2

IN

1 3/16" (1.188)

DIM "B" MM

106.5

IN

4 3/16" (4.193)

7N SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

INNER PROFILE YOKE With Bearing Groove PART

A-300-6745

DIM "A" BORE MM

45.0

IN

1 25/32" (1.772)

45.0 (5.5 WALL) MM 1.766 (.218 WALL)" INNER TUBE PART LENGTH MM

A-400-6745 A-404-6745 59 1/16" (59.0) 39 3/8" (39.37)

IN

1500 1000

ROLL PIN PART

A-508-1080 A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DIM "A" MM

10.0

IN

13/32" (.394)

DIM "B" MM

80.0

IN

3 5/32" (3.150)

METRIC DRIVELINE SERIES

54.0 (4.0 WALL) MM 2.126 (.158 WALL)" OUTER TUBE Can be used as 400-6854 (Inner Tube) PART LENGTH MM

A-600-6654 A-604-6654 59 1/16" (59.0) 39 3/8" (39.37)

IN

1500 1000

OUTER PROFILE YOKE With Bearing Groove PART

A-700-6754

DIM "A" BORE MM

54.0

IN

2 1/8" (2.126)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-6722

DIM "A" BORE MM

35.0

IN

1 3/8" (1.378)

STD. KEYWAY MM

8.0

IN

5/16" (.313)

PLASTIC GUARD Order Bearings as Required PART

A-900-8634 A-900-8648 A-900-8654

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0467 960-0467 960-0467

EASY LOCKTM PART

A-13005000

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART TRACTOR YOKE COMPRESSED LENGTH

A-14046748 A-14046760 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 48" 60"

8 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-6806 A-100-6820 A-100-6821

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-6806 A-102-6820 A-102-6821

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

BALL SHEAR DEVICE TRACTOR YOKE PART DIM "A" BORE

A-104-6806 A-104-6821 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located in Yoke PART

A-200-6806

DIM "A" MM

35.0

IN

1 3/8" (1.378)

DIM "B" MM

106.5

IN

4 3/16" (4.193)

INNER PROFILE YOKE With Bearing Groove PART

A-300-6845 A-300-6854

DIM "A" BORE MM

45.0 54.0

IN

1 49/64" (1.77) 2 1/8" (2.126)

8 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

INNER TUBE PART

A-400-6745 A-404-6745 A-400-6854 A-404-6854

DIM "A" BORE MM

45.0 (5.5 Wall) 45.0 (5.5 Wall) 54.0 (4.0 Wall) 54.0 (4.0 Wall)

LENGTH MM

1500 1000 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37) 59 1/16" (59.0) 39 3/8" (39.37)

ROLL PIN PART

A-508-0880 A-508-1280

DIM "A" MM

8.0 12.0

IN

5/16" (.315) 15/32" (.472)

DIM "B" MM

80.0 80.0

IN

3 5/32" (3.150) 3 5/32" (3.150)

63.0 (4.0 WALL) MM 2.484 (.156 WALL)" OUTER TUBE PART LENGTH MM

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. A-600-6863 A-604-6863 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

METRIC DRIVELINE SERIES

OUTER PROFILE YOKE With Bearing Groove PART

A-700-6863

DIM "A" MM

63.0

IN

2 31/64" (2.480)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-6822 A-800-6824 A-800-6828

DIM "A" BORE MM

35.0 38.1 44.5

IN

1 3/8" (1.378) 1 1/2" (1.500) 1 3/4" (1.750)

STD. KEYWAY MM

8.0 8.0 9.5

IN

5/16" (.313) 3/8" (.315) 3/8" (.375)

CLAMP YOKE IMPLEMENT YOKE PART

A-807-6806 A-807-6820 A-807-6821

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

PLASTIC GUARD Order Bearings as Required PART

A-900-6934 A-900-6948 A-900-6954

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0489 960-0489 960-0489

EASY LOCKTM PART

A-13005000

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART TRACTOR YOKE COMPRESSED LENGTH

A-14046848 A-14046860 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 48" 60"

9 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-6906 A-100-6920 A-100-6921

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-6906 A-102-6920 A-102-6921

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-6908

DIM "A" MM

41.0

IN

1 39/64" (1.614)

DIM "B" MM

108

IN

4 1/4" (4.252)

INNER PROFILE YOKE With Bearing Groove PART

A-300-6954

DIM "A" MM

54.0

IN

2 1/8" (2.126)

9 SERIES (INTERCHANGES WITH BONDIOLI & PAVESI)

INNER PROFILE TUBE 54.0 (5.0 Wall) mm 2.125 (.156 Wall)" Tube PART LENGTH MM

A-400-6954 A-404-6954 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

ROLL PIN PART

A-508-1080 A-508-1280

DIM "A" MM

10.0 12.0

IN

25/64" (.394) 15/32" (.472)

DIM "B" MM

80.0 80.0

IN

3 5/32" (3.150) 3 5/32" (3.150)

63.0 (4.0 WALL) MM 2.484 (.156 WALL)" OUTER TUBE PART LENGTH MM

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. A-600-6863 A-604-6863 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.7)

METRIC DRIVELINE SERIES

OUTER PROFILE YOKE With Bearing Groove PART

A-700-6963

DIM "A" BORE MM

63.0 63.0

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-6922 A-800-6924

DIM "A" BORE

1 3/8" (1.375) 1 1/2" (1.500)

STD. KEYWAY

5/16" (.313) 3/8" (.315)

PLASTIC GUARD Order Bearings As Required PART

A-900-6934 A-900-6948 A-900-6954

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0489 960-0489 960-0489

EASY LOCKTM PART

A-13005000

COMPLETE DRIVELINE Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". PART TRACTOR YOKE COMPRESSED LENGTH

A-14046948 A-14046960 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 48" 60"

2100/100 SERIES (INTERCHANGES WITH WALTERSCHEID)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-7106

DIM "A" BORE

1 3/8" x 6 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-7106 A-102-7121

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-7155

DIM "A" MM

22.0

IN

7/8" (.866)

DIM "B" MM

54.8

IN

2 7/32" (2.157)

INNER PROFILE YOKE With Bearing Groove PART

A-300-7123

DIM "A" MM

23.5

IN

15/16" (.925)

23.5 (4.0 WALL) MM .93 (.158 WALL)" INNER TUBE (SOLID) PART LENGTH MM

A-400-7123 A-404-7123 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

2100/100 SERIES (INTERCHANGES WITH WALTERSCHEID)

ROLL PIN PART

A-508-0850

DIM "A" MM

8.0

IN

5/16" (.315)

DIM "B" MM

50.0

IN

1 13/32" (1.969)

30.0 (2.8WALL) MM 1 3/16 (3/32 WALL)" OUTER TUBE PART LENGTH MM

A-600-7130 A-604-7130 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

OUTER PROFILE YOKE With Bearing Groove PART

A-700-7130 A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DIM "A" BORE MM

30.0

IN

1 3/16" (1.181)

METRIC DRIVELINE SERIES

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-7125 A-800-7130

DIM "A" BORE MM

25.0 30.0

IN

63/64" (.984) 1 3/16" (1.181)

STD. KEYWAY

5/16" (.313) 5/16" (.313)

SHEAR PIN IMPLEMENT YOKE With Pin Hole PART

A-802-7108 A-802-7110

DIM "A" BORE MM

25.4 31.75

IN

1" (1.0) 1 1/4" (1.250)

PLASTIC GUARD Order Bearings as Required PART

A-900-8134 A-900-8148 A-900-8154

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0105 960-0105 960-0105

EASY LOCKTM PART

A-13005000

2200/200 SERIES (INTERCHANGES WITH WALTERSCHEID)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-8206

DIM "A" BORE

1 3/8" x 6 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-8206 A-102-8221

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT With Bearing Groove PART

A-200-8261

DIM "A" MM

23.8

IN

15/16" (.937)

DIM "B" MM

61.2

IN

2 13/32" (2.41)

INNER PROFILE YOKE With Bearing Groove PART

A-300-7234

DIM "A" BORE MM

34.5

IN

1 11/32" (1.358)

2200/200 SERIES (INTERCHANGES WITH WALTERSCHEID)

34.5 (4.0 WALL) MM, 1.358 (.158 WALL)" INNER TUBE PART LENGTH MM

A-400-7234 A-404-7234 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

ROLL PIN PART

A-508-1060

DIM "A" MM

10.0

IN

13/32" (.394)

DIM "B" MM

60.0

IN

2 3/8" (2.362)

41.0 (3.0 WALL) MM, 1.614 (.118 WALL)" OUTER TUBE PART LENGTH MM

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. A-600-7241 A-604-7241 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

METRIC DRIVELINE SERIES

OUTER PROFILE YOKE With Bearing Groove PART

A-700-7241

DIM "A" BORE MM

41.0

IN

1 5/8" (1.614)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-8225 A-800-8208 A-800-8230 A-800-8210 A-800-8211

DIM "A" BORE MM

25.0 25.4 30.0 31.75 34.93

IN

63/64" (.984) 1" (1.0) 1 3/16" (1.181) 1 1/4" (1.250) 1 3/8" (1.375)

STD. KEYWAY

5/16" (.313) 1/4" (.250) 5/16" (.313) 1/4" (.250) 5/16" (.313)

SHEAR PIN IMPLEMENT YOKE With 3/8" Pin Hole PART

A-802-8220

DIM "A" BORE MM

31.75

IN

1 1/4" (1.250)

PLASTIC GUARD Order Bearings as Required PART

A-900-8234 A-900-8248 A-900-8254

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0215 960-0215 960-0215

EASY LOCKTM PART

A-13005000

2280 SERIES

CROSS & BEARING KIT Snap Ring Located in Yoke PART

A-200-7276

DIM "A" MM

61.2

IN

2 13/32"

DIM "B" MM

77.0

IN

3 1/32"

RING LOCK TRACTOR YOKE PART

A-107-8206

DIM "A" BORE

1 3/8" x 6 Spl. A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

INNER PROFILE YOKE With Bearing Groove PART

A-301-7234

DIM "A" MM

34.5

IN

1 11/32" (1.358")

34.5 (4.0 WALL), 1.358 (.158 WALL)"TUBE Rilsan Coated PART LENGTH MM

A-406-7234 1000

IN

39 3/8" (39.37)

ROLL PIN PART

A-508-1060

DIM "A" MM

10.0

IN

13/32" (.394)

DIM "B" MM

60

IN

2 3/8" (2.362)

CENTER HOUSING PART

A-550-7200

41.0 (3.0 WALL), 1.614 (.118)" OUTER TUBE Special PART LENGTH MM

A-606-7241 1000

IN

39 3/8" (39.37)

OUTER PROFILE YOKE With Bearing Groove PART

A-700-7241

DIM "A" MM

41.0

IN

1.614"

2280 SERIES

GUARD WITH BEARINGS Bearing 960-0020 PART

A-912-7248

COMPRESSED LENGTH

48"

NYLON BEARING KIT PART

A-960-0020

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

80° C.V. JOINT PART

A-15507206

DIM "A" BORE

1 3/8" x 6 Spl.

DIM "B" BORE

34.5mm (1.358")

I SERIES (INTERCHANGES WITH WALTERSCHEID)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-8306 A-100-8321

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-8306 A-102-8321

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-8370

DIM "A" MM

27.0

IN

1 1/16" (1.063)

DIM "B" MM

70.0

IN

2 3/4" (2.756)

INNER PROFILE YOKE With Bearing Groove PART

A-300-7334

DIM "A" BORE MM

34.5

IN

1 11/32" (1.358)

I SERIES (INTERCHANGES WITH WALTERSCHEID)

34.5 (4.0 WALL), 1.358 (.158 WALL)" INNER TUBE PART LENGTH MM

A-400-7234 A-404-7234 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

ROLL PIN PART

A-508-1065

DIM "A" MM

10.0

IN

13/32" (.394)

DIM "B" MM

65.0

IN

2 9/16" (2.559)

41.0 (3.0 WALL) MM, 1.614 (.118 WALL)" OUTER TUBE PART LENGTH MM

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. A-600-7241 A-604-7241 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

METRIC DRIVELINE SERIES

OUTER PROFILE YOKE With Bearing Groove PART

A-700-7341

DIM "A" BORE MM

41.0

IN

1 5/8" (1.614)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-8325 A-800-8330 A-800-8310 A-800-8311

DIM "A" BORE MM

25.0 30.0 31.75 34.93

IN

63/64" (.984) 1 3/16" (1.181) 1 1/4" (1.250) 1 3/8" (1.375)

STD. KEYWAY MM

8.0 8.0 6.35 7.95

IN

5/16" (.313) 5/16" (.313) 1/4" (.250) 5/16" (.313)

SHEAR PIN IMPLEMENT YOKE With Pin Hole PART

A-802-8320 A-802-8335

DIM "A" BORE MM

31.75 35.0

IN

1 1/4" (1.25) 1 3/8" (1.378)

PLASTIC GUARD Order Bearings as Required PART

A-900-8234 A-900-8248 A-900-8254

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0215 960-0215 960-0215

2300/210 SERIES (INTERCHANGES WITH WALTERSCHEID)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-8406 A-100-8421

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-8406 A-102-8421

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

BALL SHEAR DEVICE TRACTOR YOKE PART DIM "A" BORE

A-104-8406 A-104-8421 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-8474

DIM "A" MM

27.0

IN

1 1/16" (1.063)

DIM "B" MM

74.6

IN

2 15/16" (2.937)

INNER PROFILE YOKE With Bearing Groove PART

A-300-7434 A-301-7439

DIM "A" BORE MM

34.5 39.5

IN

1 11/32" (1.358) 1 9/16" (1.56)

2300/210 SERIES (INTERCHANGES WITH WALTERSCHEID)

INNER TUBE PART

A-400-7234 A-400-7239 A-404-7234 A-404-7239

DIM "A" MM

34.5 (4.0 Wall) 39.5 (4.5 Wall) 34.5 (4.0 Wall) 39.5 (4.5 Wall)

LENGTH MM

1500 1500 1000 1000

IN

59 1/16" (59.0) 59 1/16" (59.0) 39 3/8" (39.37) 39 3/8" (39.37)

ROLL PIN PART

A-508-1065

DIM "A" MM

10.0

IN

13/32" (.394)

DIM "B" MM

65.0

IN

2 9/16" (2.559)

OUTER TUBE PART

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. A-600-7241 A-600-7248 A-604-7241 A-604-7248

DIM "A" MM

41.0 (3.0 Wall) 48.0 (4.0 Wall) 41.0 (3.0 Wall) 48.0 (4.0 Wall)

LENGTH MM

1500 1500 1000 1000

IN

59 1/16" (59.0) 59 1/16" (59.0) 39 3/8" (39.37) 39 3/8" (39.37)

METRIC DRIVELINE SERIES

OUTER PROFILE YOKE With Bearing Groove PART

A-700-7441 A-701-7448

DIM "A" BORE MM

41.0 48.0

IN

1 5/8" (1.164) 1 7/8" (1.88)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-8430 A-800-8410 A-800-8411

DIM "A" BORE MM

30.0 31.75 34.93

IN

1 3/16" (1.181) 1 1/4" (1.250) 1 3/8" (1.375)

STD. KEYWAY MM

8.0 8.0 8.0

IN

5/16" (.313) 5/16" (.313) 5/16" (.313)

SHEAR PIN IMPLEMENT YOKE With Pin Hole PART

A-802-8420 A-802-8435

DIM "A" BORE MM

31.75 35.0

IN

1 1/4" (1.25) 1 3/8" (1.378)

PLASTIC GUARD Order Bearings As Required PART

A-900-8234 A-900-8248 A-900-8254

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0215 960-0215 960-0215

EASY LOCKTM PART

A-13005000

2380 SERIES

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-7491

DIM "A" MM

74.6

IN

2 15/16" (2.93)

DIM "B" MM

91.0

IN

3 37/64" (3.58)

RING GROOVE TRACTOR YOKE PART

A-107-8406 A-107-8421

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl. A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

INNER PROFILE YOKE With Bearing Groove PART

A-301-7434

DIM "A" BORE MM

34.5

IN

1 23/64" (1.36)

34.5 (4.0 WALL), 1.358 (.158 WALL)" INNER TUBE Rilsan Coating PART LENGTH MM

A-406-7234 1000

IN

39 3/8" (39.37)

ROLL PIN PART

A-508-1065

DIM "A" MM

10.0

IN

25/64" (.393)

DIM "B" MM

65.0

IN

2 9/16" (2.56)

CENTER HOUSING PART

A-550-7400

41.0 (3.0 WALL) (4.0 WALL) INNER TUBE Special PART LENGTH MM

A-606-7241 1000

IN

39 3/8" (39.37)

OUTER PROFILE YOKE With Bearing Groove PART

A-700-7441

DIM "A" BORE MM

41.0

IN

1.614"

2380 SERIES

GUARD WITH BEARINGS Bearing 960-0021 PART

A-912-7448

OVERALL COMPRESSED LENGTH

48"

NYLON BEARING KIT PART

A-960-0021

80° C.V. JOINT

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

PART

A-15507406

DIM "A" BORE

1 3/8" x 6 Spl.

DIM "B" BORE

34.5mm (1.358")

METRIC DRIVELINE SERIES

220/720 SERIES (INTERCHANGES WITH WALTERSCHEID)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-8606 A-100-8620 A-100-8621

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-8606 A-102-8621

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

BALL SHEAR DEVICE TRACTOR YOKE PART DIM "A" BORE

A-104-8606 A-104-8621 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located in Yoke PART

A-200-8692

DIM "A" MM

30.2

IN

1 3/16" (1.189)

DIM "B" MM

92.0

IN

3 5/8" (3.622)

220/720 SERIES (INTERCHANGES WITH WALTERSCHEID)

INNER PROFILE YOKE With Bearing Groove PART

A-300-7539

DIM "A" MM

39.5

IN

1 9/16" (1.555)

INNER TUBE PART

A-400-7539 A-404-7539 39.5 (4.5) Wall) 39.5 (4.5 Wall)

LENGTH MM

1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

ROLL PIN PART

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. A-508-1080

DIM "A" MM

10.0

IN

13/32" (.394)

DIM "B" MM

80.0

IN

3 5/32"(3.150)

METRIC DRIVELINE SERIES

48.0 (4.0 WALL) MM, 1.890 (.158 WALL)" OUTER TUBE PART LENGTH MM

A- 600-7548 A- 604-7548 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

PLASTIC GUARD Order Bearings as Required PART

A-900-8534 A-900-8548 A-900-8554

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0325 960-0325 960-0325

OUTER PROFILE YOKE With Bearing Groove PART

A-700-7548

DIM "A" MM

48.0

IN

1 7/8"(1.890)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-8610 A-800-8611

DIM "A" BORE MM

31.75 34.93

IN

1 1/4" (1.250) 1 3/8" (1.375)

STD. KEYWAY MM

6.4 8.0

IN

1/4" (.250) 5/16" (.313)

SHEAR PIN IMPLEMENT YOKE With Pin Hole PART

A-802-8611 A-802-8620

DIM "A" BORE MM

35.0 31.75

IN

1 3/8"(1.378) 1 1/4" (1.25)

EASY LOCKTM PART

A-13005000

2400 SERIES (INTERCHANGERS WITH WALTERSCHEID)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-7606 A-100-7620 A-100-7621

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-7606 A-102-7620 A-102-7621

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-7676

DIM "A" MM

32.0

IN

1 1/4"(1.260)

DIM "B" MM

76.0

IN

2 31/32"(2.992)

INNER PROFILE YOKE With Bearing Groove PART

A-300-7639 A-301-7651

DIM "A" MM

39.5

IN

1 9/16" (1.555) (lemon)

DIM "B" MM

51.0

IN

1500 (star)

2400 SERIES (INTERCHANGERS WITH WALTERSCHEID)

INNER TUBE PART

A-400-7539 A-400-7651 A-404-7539 A-404-7651

DIM "A"

39.5 (4.5 Wall)

DIM "B" BORE

51.0 (6.0 Wall)

LENGTH MM

1500 1500 1000 1000

IN

59 1/16" (59.0) 59 1/16" (59.0) 39 3/8" (39.37) 39 3/8" (39.27)

39.5 (4.5 Wall) 51.0 (6.0 Wall)

ROLL PIN PART

A-508-1075

DIM "A" MM

10.0

IN

13/32"(.394)

DIM "B" MM

75.0

IN

2 15/16"(2.953)

OUTER TUBE PART

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. A-600-7548 A-600-7661 A-604-7548 A-604-7661

DIM "A"

48.0 (4.0 Wall)

DIM "B" BORE

61.0 (4.0 Wall)

LENGTH MM

1500 1500 1000 1000

IN

59 1/16" (59.063) 59 1/16" (59.063) 39 7/8" (39.375) 39 7/8" (39.375)

48.0 (4.0 Wall) 61.0 (4.0 Wall)

METRIC DRIVELINE SERIES

PLASTIC GUARD Order Bearings as Required PART

A-900-8534 A-900-8548 A-900-8554

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0325 960-0325 960-0325

OUTER PROFILE YOKE With Bearing Groove PART

A-700-7648 A-700-7661

DIM "A" BORE MM

48.0

IN

1 7/8"(1.890)

DIM "B" BORE MM

61.0

IN

2 13/32" (2.40)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-7610 A-800-7611

DIM "A" BORE MM

31.75 34.93

IN

1 1/4"(1.250) 1 3/8"(1.375)

STD. KEYWAY MM

6.35 7.95

IN

1/4" (.250) 5/16" (.313)

SHEAR PIN IMPLEMENT YOKE With Pin Hole PART

A-802-7611 A-802-7622

DIM "A" BORE

35.0mm 1 3/8" (1.375)

EASY LOCKTM PART

A-13005000

2480 SERIES

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-7694

DIM "A" MM

76

IN

2 63/64" (2.99)

DIM "B" MM

94.0

IN

3 45/64" (3.700)

RING LOCK TRACTOR YOKE PART

A-107-7606 A-107-7620 A-107-7621

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl. A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

QUICK DISCONNECT TRACTOR YOKE PART

A-109-7606 A-109-7620 A-109-7621

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

INNER PROFILE YOKE PART

A-301-7639

DIM "A" BORE MM

39.5

IN

1 9/16" (1.56)

39.5 (4.5 WALL)" INNER TUBE Rilsan Coating PART

A-402-7639

DIM "A" MM

39.5

IN

1 9/16" (1.56)

LENGTH MM

1000

IN

39 3/8" (39.37)

ROLL PIN PART

A-508-1080

DIM "A" MM

10.0

IN

13/32"(.406)

DIM "B" MM

80.0

IN

3 5/32"(3.156)

CENTER HOUSING PART

A-550-7600

4.0 WALL OUTERTUBE Special PART

A-606-7648

DIM "A" MM

48.0

IN

1 57/64" (1.89)

LENGTH MM

1000

IN

39 3/8" (39.37)

2480 SERIES

OUTER PROFILE YOKE With Bearing Groove PART

A-700-7648

DIM "A" BORE MM

48.0

IN

1 7/8"(1.890)

EASY LOCKTM GUARD WITH BEARING With Bearing 960-0035 PART OVERALL COMPRESSED DRIVELINE LENGTH

A-912-7648 A-912-7666 48" 66"

NYLON BEARING KIT

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

PART

A-960-0035

METRIC DRIVELINE SERIES

80° C.V. JOINT PART

A-15507606

DIM "A" BORE

1 3/8" x 6 Spl.

DIM "B" BORE

39.5mm (1.562")

2500 SERIES (INTERCHANGES WITH WALTERSCHEID)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-7906 A-100-7920 A-100-7921

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-7906 A-102-7920 A-102-7921

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-7989

DIM "A" MM

36.0

IN

1 13/32" (1.417)

DIM "B" MM

89.0

IN

3 1/2" (3.504)

INNER PROFILE YOKE With Bearing Groove PART

A-300-7951

DIM "A" MM

51.0

IN

2" (2.0)

2500 SERIES (INTERCHANGES WITH WALTERSCHEID)

51.0 MM, 2.00" INNER TUBE PART

A-400-7951 A-404-7951

LENGTH MM

1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

ROLL PIN PART

A-508-1090

DIM "A" MM

10.0

IN

13/32"(.406)

DIM "A" MM

90.0

IN

3 1/2" (3.543)

61.0 (4.0 WALL) MM, 2.40 (.158 WALL)" OUTER TUBE PART LENGTH MM

A-600-7961 A-604-7961 A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

OUTER PROFILE YOKE With Bearing Groove PART

A-700-7961

METRIC DRIVELINE SERIES

DIM "A" BORE MM

61.0

IN

2 3/8" (2.402)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-7922 A-800-7924

DIM "A" BORE MM

35.0 38.1

IN

1 3/8" (1.378) 1 1/2" (1.500)

STD. KEYWAY MM

8.0 9.5

IN

5/16" (.313) 3/8" (.375)

SHEAR PIN IMPLEMENT YOKE With Pin Hole PART

A-802-7922 A-802-7924

DIM "A" BORE MM

35.0 38.1

IN

1 3/8" (1.378) 1 1/2" (1.500)

PLASTIC GUARD Order Bearings As Required PART

A-900-8534 A-900-8548 A-900-8554

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0325 960-0325 960-0325

EASY LOCKTM PART

A-13005000

2580 SERIES (INTERCHANGES WITH WALTERSCHEID)

CROSS & BEARING KIT Snap Ring Located in Yoke PART

A-200-7906

DIM "A" MM

88.8

IN

3.49"

DIM "B" MM

106.0

IN

4.17"

TRACTOR YOKE PART

A-107-7906 A-107-7920 A-107-7921

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl. A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

INNER PROFILE YOKE PART

A-302-7951

DIM "A" BORE MM

51.0

IN

2" (2.0)

INNER TUBE With Bearing Groove PART

A-406-7951

DIM "A" MM

51.0

IN

2.01"

LENGTH MM

1000

IN

39 3/8" (39.37)

ROLL PIN PART

A-508-1090

DIM "A" MM

10

IN

13/32" (.41)

DIM "A" MM

90

IN

3 1/2" (3.54)

CENTER HOUSING PART

A-550-7900

OUTER TUBE PART

A-600-7961 A-604-7961

LENGTH MM

1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

OUTER PROFILE YOKE With Bearing Groove PART

A-700-7961

DIM "A" BORE MM

61.0

IN

2 3/8" (2.402)

GUARD WITH BEARINGS With Bearing 960-0036 PART

A-912-7948 A-912-7966

OVERALL COMPRESSED DRIVELINE LENGTH

48" 66"

2580 SERIES (INTERCHANGES WITH WALTERSCHEID)

NYLON BEARING KIT PART

A-960-0036

80° C.V. JOINT PART

A-15507906

DIM "A" BORE

1 3/8" x 6 Spl.

DIM "B" BORE

51.0mm (2.000")

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

2600 SERIES (INTERCHANGES WITH WALTERSCHEID)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

RING LOCK TRACTOR YOKE PART

A-100-7006 A-100-7020 A-100-7021

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

QUICK DISCONNECT TRACTOR YOKE PART

A-102-7006 A-102-7020 A-102-7021

DIM "A" BORE

1 3/8" x 6 1 3/4" x 20 1 3/8" x 21

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-7004

DIM "A" MM

42.0

IN

1 21/32" (1.65)

DIM "B" MM

104.0

IN

3 7/64" (4.10)

INNER PROFILE YOKE With Bearing Groove PART

A-300-7061

DIM "A" BORE MM

61.0

IN

2 13/32" (2.40)

2600 SERIES (INTERCHANGES WITH WALTERSCHEID)

61.0 (4.0 WALL) MM, 2.402 (.158 WALL)" INNER TUBE PART LENGTH MM

A-400-7061 A-404-7061 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

ROLL PIN PART

A-508-1090

DIM "A" MM

10.0

IN

13/32"(.406)

DIM "B" MM

90.0

IN

3 1/2" (3.543)

71.0 (5.0 WALL) MM, 2.795 (.197 WALL)" OUTER TUBE PART LENGTH MM

A-600-7071 A-604-7071 A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. 1500 1000

IN

59 1/16" (59.0) 39 3/8" (39.37)

OUTER PROFILE YOKE With Bearing Groove PART

A-700-7071

METRIC DRIVELINE SERIES

DIM "A" BORE MM

71.0

IN

2 51/64" (2.795)

ROUND BORE IMPLEMENT YOKE With Keyway & Set Screw PART

A-800-7024 A-800-7026 A-800-7028 A-800-7032

DIM "A" BORE MM

38.10 41.28 44.45 50.80

IN

1 1/2" (1.5) 1 5/8" (1.625) 1 3/4" (1.75) 2" (2.0)

STD. KEYWAY MM

9.53 9.53 9.53 12.7

IN

3/8" (.375) 3/8" (.375) 3/8" (.375) 1/2" (.5)

PLASTIC GUARD Order Bearings as Required PART

A-900-8634 A-900-8648 A-900-8654

OVERALL LENGTH MM

860 1010 1360

IN

33 7/8" (33.86) 39 3/4" (39.76) 53 9/16" (53.54)

BEARING KIT

960-0435 960-0435 960-0435

EASY LOCKTM PART

A-13005000

II SERIES (INTERCHANGES WITH WALTERSCHEID)

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

QUICK DISCONNECT TRACTOR YOKE PART

A-102-7806 A-102-7821

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

CROSS & BEARING KIT Snap Ring Located In Yoke PART

A-200-7890

DIM "A" MM

34.0

IN

1 11/32" (1.339)

DIM "B" MM

90.0

IN

3 17/32" (3.543)

INNER PROFILE YOKE With Bearing Groove PART

A-300-7839

DIM "A" MM

39.5

IN

1 9/16" (1.555)

OUTER PROFILE YOKE With Bearing Groove PART

A-700-7848

DIM "A" MM

48.0

IN

1 7/8" (1.890)

Shafting and Tubing Inner Tube

Stock Number A-400-6126 A-404-6126 A-400-6229 A-404-6229 A-400-6336

Outer Tube

Stock Number A-600-6133 A-604-6133 A-600-6236 A-604-6236 A-600-6343 A-604-6343 A-600-6552 A-604-6552 A-600-6654 A-604-6654 A-600-6863 A-604-6863 A-600-7130 A-604-7130 A-600-7241 A-604-7241 A-600-7548 A-604-7548 A-600-7961 A-604-7961 A-600-7071 A-604-7071 A-606-7241 A-606-7648

Series ByPy 1 ByPy 1 ByPy 2 ByPy 2 ByPy 3 ByPy 3 ByPy 3 ByPy 3 ByPy 5 and 6 ByPy 4 and 6 ByPy 7N ByPy 7N ByPy 8 and 9 ByPy 8 and 9 W/S 2100 W/S 2100 W/S 2200, I and 2300 W/S 2200, I and 2300 W/S 220 and 2400 W/S 220 and 2400 W/S 2500 W/S 2500 W/S 2600 W/S 2600 W/S 2280/2380 W/S 2480 W/S 2580

Length 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 39 3/8" 39 3/8 39 3/8

Series ByPy 1 ByPy 1 ByPy 2 ByPy 2 ByPy 3 and 4 ByPy 3 and 4 ByPy 5 ByPy 5 ByPy 6 and 7N ByPy 6 and 7N ByPy 8 and 9 ByPy 8 and 9 W/S 2100 W/S 2100 W/S 2200, I and 2300 W/S 2200, I and 2300 W/S 220 and 2400 W/S 220 and 2400 W/S 2500 & 2580 W/S 2500 & 2580 W/S 2600 W/S 2600 W/S 2280/2380 W/S 2480

Length 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 59 1/16" 39 3/8" 39 3/8 39 3/8

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

A-404-6336 A-400-6436 A-404-6436 A-400-6545 A-404-6545 A-400-6745 A-404-6745 A-400-6854 A-404-6854 A-400-7123 A-404-7123 A-400-7234 A-404-7234 A-400-7539 A-404-7539 A-400-7951 A-404-7951 A-400-7061 A-404-7061 A-406-7234 A-402-7639 A-406-7951

METRIC DRIVELINE SERIES

Friction Disc

Stock Number A-970-0153 A-970-4140 A-970-4160

Outer Diameter Inner Diameter mm in mm in 153.0 6 1/64" (6.024") 91.0 3 37/64" (3.58") 140.0 5 1/64" (5.12") 86.0 3 25/64" (3.39") 160.0 6 19/64" (6.299") 97.0 3 53/64" (3.12")

COMPLETE METRIC C.V. DRIVELINE

COMPLETE DRIVELINE PART SERIES

2480 2480 2580 2580 2480 2480 2580 2580

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

TRACTOR YOKE

1 3/8" x 1 3/8" x 1 3/8" x 1 3/8" x 1 3/8" x 1 3/8" x 1 3/8" x 1 3/8" x 6 Spl. 6 Spl. 6 Spl. 6 Spl. 21 Spl. 21 Spl. 21 Spl. 21 Spl.

IMPLEMENT YOKE

1 3/8" x 1 3/8" x 1 3/8" x 1 3/8" x 1 3/8" x 1 3/8" x 1 3/8" x 1 3/8" x 6 Spl. 6 Spl. 6 Spl. 6 Spl. 6 Spl. 6 Spl. 6 Spl. 6 Spl.

OVERALL LENGTH

48" 60" 48" 60" 48" 60" 48" 60"

METRIC DRIVELINE SERIES

A-14507648 A-14507660 A-14507948 A-14507960 A-14607648 A-14607660 A-14607948 A-14607960

C.V. METRIC FLEXWING MOWER REPLACEMENT DRIVELINE

CV METRIC FLEXWING MOWER REPLACEMENT DRIVELINE PART SERIES

A-14507951 A-14607951 A-14707951 A-14507955 A-14607955 A-14707955 A-14517955 A-14617955 A-14717955 2580 2580 2580 2580 2580 2580 2580 2580 2580

TRACTOR YOKE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl.

IMPLEMENT YOKE

1 3/4" x 20 Spl. 1 3/4" x 20 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 6 Spl. 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/4" x 20 Spl. 1 3/4" x 20 Spl.

OVERALL LENGTH

51" 51" 51" 55" 55" 55" 55" 55" 55"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

METRIC REPLACEMENT DRIVELINE (INTERCHANGES WITH BONDIOLI & PAVESI AND WLATERSCHEID)

FERTILIZER SPREADER PART

A-14006127 A-14006135

SERIES

BYPY 1 BYPY 1

COMP. LENGTH

27" 35"

TRACTOR YOKE

1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD

IMPLEMENT YOKE

1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD

POST HOLE DIGGER PART

A-14006252 A-14006453

SERIES

BYPY 2 BYPY 4

COMP. LENGTH

52" 53"

TRACTOR YOKE

1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD

IMPLEMENT YOKE

1 1/4" Rd w/Pinhole 1 1/4" Rd w/Pinhole

ALL PURPOSE DRIVELINE PART

A-14006247 A-14006448 A-14006657 A-14006857

SERIES

BYPY 2 BYPY 4 BYPY 6 BYPY 8

COMP. LENGTH

47" 48" 57" 57"

TRACTOR YOKE

1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD

IMPLEMENT YOKE

1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC DRIVELINE SERIES

FINISHING MOWER PART

A-14006340 A-14006446 A-14006637

SERIES

BYPY 3 BYPY 4 BYPY 6

COMP. LENGTH

40" 46" 37"

TRACTOR YOKE

1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD

IMPLEMENT YOKE

1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD

CATFISH POND DRIVELINE PART

A-14006424 A-14006524 A-14006624 A-14016524 A-14016624

SERIES

BYPY 4 BYPY 5 BYPY 6 BYPY 5 BYPY 6

COMP. LENGTH

48" 48" 48" 48" 48"

TRACTOR YOKE

1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 21 Spl. QD 1 3/8" x 21 Spl. QD

IMPLEMENT YOKE

1 1/2" Rd 1 1/2" Rd 1 1/2" Rd 1 1/2" Rd 1 1/2" Rd

UNIVERSAL FRICTION CLUTCH PART

A-560-6006 A-560-6022

TRACTOR YOKE

1 3/8" x 6 Spl. Bore 1 3/8" Rd. Bore

IMPLEMENT YOKE

1 3/8" x 6 Spl. Shaft 1 3/8" Rd. Shaft

ROTARY CUTTER PART

A-14006251 A-14006432 A-14006436 A-14006442 A-14006451 A-14006542 A-14006546 A-14006652

SERIES

BYPY 2 BYPY 4 BYPY 4 BYPY 4 BYPY 4 BYPY 5 BYPY 5 BYPY 6

TYPE

Pull (Towed) 4 ft. Lift (3-pt. Hitch) 5 ft. Lift (3-pt. Hitch) 6 ft. Lift (3-pt. Hitch) Pull (Towed) 6 ft. Lift (3-pt. Hitch) 6 ft. Heavy Duty 7 ft. Lift (3-pt. Hitch)

COMP. LENGTH

51" 32" 36" 42" 51" 42" 46" 52"

TRACTOR YOKE

1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD

ROTARY CUTTER/TILLER PART

A-14106438 A-14106546 A-14106654

SERIES

BYPY 4 BYPY 5 BYPY 6

TYPE

Pull (Towed) Pull (Towed) 7 ft. Lift (3-pt. Hitch)

COMP. LENGTH

38" 46" 54"

TRACTOR YOKE

1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD

HAY TEDDER PART

A-14206252 A-14206454

SERIES

BYPY 2 BYPY 4

TYPE

2-Rotor 4-Rotor

COMP. LENGTH

52" 54"

TRACTOR YOKE

1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD

DISC MOWER PART

A-14306639 A-14307645

SERIES

BYPY 6 W/S 2400

COMP. LENGTH

39" 45"

TRACTOR YOKE

1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD

IMPLEMENT YOKE

1 3/8" x 6 Spl. QD 1 3/8" x 6 Spl. QD

DOMESTIC C.V. DRIVELINES

80° Constant Velocity Driveline

With innovative and patented features exclusive to Weasler.

Features

Articulated Guard System CV center housing accommodates a bell that fits within minimum ASAE tractor master shield. Bell is articulated to allow a full 80°. The plastic guard over the CV joint is supported by a bearing that rides Telescoping Driveline The Weasler CV driveline utilizes shafts that telescope into a hardened sleeve with a large grease reservoir. Reduced friction means low thrust, Long Life Compact, heavy duty center housing has a large capacity grease cavity and unique lubrication system. Patented grease system insures positive one shot lubrication of hardened and ground centering balls and sockets. High Torsional Strength The exclusive ball and socket of the Weasler CV is integral with the yoke. Trunnions on the center plate are supported directly in the yoke by the ball and socket, providing

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

on the center housing. The steel guard incorporates a field proven bearing system that significantly reduces wear and increases the life of guard components.

DOMESTIC C.V. DRIVELINES

for minimal wear throughout CV life. Tested in contaminated environments.

Unique center slider support plates greatly increase life by retaining lubrication and sealing out contaminants. Full surface contact means reduced wear on all components, minimizing vibration.

strength for heavy-duty applications. Forged yokes and center housing are engineered for high torque.

Benefits

Constant Velocity Drivelines allow turns at high angles under full power without damaging the driveline or other components. When using conventional drivelines, the vibrations increase as the angle increases.

A CV driveline will substantially reduce vibrations due to its operating at a constant speed. The reduction in vibration will result in fewer breakdowns and lower cost of implement maintenance.

Applications

Listed are some applications of 80° CV drivelines that Weasler currently produces for Original Equipment Manufacturers.

Round Balers Square Balers Orchard Sprayers Flexwing Mowers Manure Pumps Beet Toppers Rock Pickers Stalk Choppers Box-type Manure Spreaders Tank-type Manure Spreaders Mower Conditioners

DOMESTIC C.V. DRIVELINES

80° Constant Velocity Driveline

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DOMESTIC C.V. DRIVELINES

Constant Velocity Driveline Replacement Chart*

Weasler Category 3 Weasler Series 14 Replacement For Bondioli & Pavesi 4 Series Walterscheid 2380 Series Bondioli & Pavesi 5 Series

4

35

5

44

Bondioli & Pavesi 6 Series Walterscheid 2480 Series Bondioli & Pavesi 8 Series Walterscheid 2580 Series & 2680 Series

6

55

* Refer to ordering instructions on page

The above chart lists the approximate size replacement for Constant Velocity Drivelines. These are not an exact interchange, and should be used as a general replacement guide only.

80° C.V. DRIVELINE

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DOMESTIC C.V. DRIVELINES

CV DRIVELINE PART

A-14501448 A-14601448 A-14501458 A-14601458 A-14501467 A-14601467 A-14503548 A-14603548 A-14703548 A-14503558 A-14603558 A-14703558 A-14503567 A-14603567 A-14703567 A-14503573 A-14603573 A-14703573 A-14503579 A-14603579 A-14703579 A-14504448 A-14604448 A-14704448 A-14504458 A-14604458 A-14704458 A-14504467 A-14604467 A-14704467 A-14504473 A-14604473 A-14704473 A-14504479 A-14604479 A-14704479 A-14505548 A-14605548 A-14705548 A-14505558

SERIES-CAT.

14-3 14-3 14-3 14-3 14-3 14-3 35-5 35-5 35-5 35-5 35-5 35-5 35-5 35-5 35-5 35-5 35-5 35-5 35-5 35-5 35-5 44-5 44-5 44-5 44-5 44-5 44-5 44-5 44-5 44-5 44-5 44-5 44-5 44-5 44-5 44-5 55-6 55-6 55-6 55-6

SHAFT SIZE

1" x 1 1/8" 1" x 1 1/8" 1" x 1 1/8" 1" x 1 1/8" 1" x 1 1/8" 1" x 1 1/8" 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl.

LENGTH

48"-67" 48"-67" 58"-77" 58"-77" 67"-86" 67"-86" 48"-67" 48"-67" 48"-67" 58"-77" 58"-77" 58"-77" 67"-84" 67"-84" 67"-84" 73"-92" 73"-92" 73"-92" 79"-96" 79"-96" 79"-96" 48"-67" 48"-67" 48"-67" 58"-77" 58"-77" 58"-77" 67"-84" 67"-84" 67"-84" 73"-92" 73"-92" 73"-92" 79"-96" 79"-96" 79"-96" 48"-67" 48"-67" 48"-67" 58"-77"

TRACTOR YOKE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl.

80° C.V. DRIVELINE

A-14605558 A-14705558 A-14505567 A-14605567 A-14705567 A-14505573 A-14605573 A-14705573 A-14505579 A-14605579 A-14705579 55-6 55-6 55-6 55-6 55-6 55-6 55-6 55-6 55-6 55-6 55-6 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 1 11/16" x 20 Spl. 58"-77" 58"-77" 67"-84" 67"-84" 67"-84" 73"-92" 73"-92" 73"-92" 79"-96" 79"-96" 79"-96" 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl.

FLEXWING MOWER REPLACEMENT DRIVELINES PART CATEGORY

A-14505551 A-14605551 A-14705551 A-14505555 A-14605555 A-14705555 A-14515555 A-14615555 A-14715555 6 6 6 6 6 6 6 6 6

TRACTOR YOKE

1 3/8" x 6 Spl. 1 3/8" x 21Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/4" x 20 Spl.

IMPLEMENT YOKE

1 3/4" x 20 Spl. 1 3/4" x 20 Spl. 1 3/4" x 20 Spl. 1 3/8" x 6 Spl. 1 3/8 x 6 Spl. 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/4" x 20" Spl 1 3/4" x 20 Spl.

COMP. LENGTH

51" 51" 51" 55" 55" 55" 55" 55" 55" A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DOMESTIC C.V. DRIVELINES

ROUND BALER DRIVELINE PART

A-14503558 AA-14603558 AA-14503567 AA-14503558 A-

SERIES-CAT.

35-5 35-5 35-5 35-5

TRACTOR YOKE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/8" x 6 Spl. 1 3/8" x 6 Spl.

IMPLEMENT YOKE

1 3/8"x 6 Spl. 18,000 in-lb Friction Clutch 1 3/8" x 6 Spl. 10,000 in-lb Friction Clutch 1 3/8" x 21 Spl. 15,000 in-lb Friction Clutch 1 3/8" x 6 Spl. 15,000 in-lb Friction Clutch

COMP. LENGTH

58" 58" 67" 58"

SAFETY SLIDE LOCK TRACTOR YOKE PART CATEGORY

A-107-3506 A-107-3520 A-107-3521 A-107-5506 A-107-5520 A-107-5521 A-112-3506 A-112-3520 A-112-3521 5 5 5 6 6 6 4 4 4

SERIES

35/44 35/44 35/44 55 55 55 35 35 35

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl. 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl. 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

SPRING-LOK TRACTOR YOKE PART

A-108-1406 A-108-1421

SERIES

14 14

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

AUTO-LOK TRACTOR YOKE PART

A-111-3506 A-111-3520 A-111-3521 A-111-5506 A-111-5520 A-111-5521 A-113-3506 A-113-3520 A-113-3521

CATEGORY

5 5 5 6 6 6 4 4 4

SERIES

35/44 35/44 35/44 55 55 55 35 35 35

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl. 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl. 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

80° C.V. DRIVELINE COMPONENTS

CROSS & BEARING KIT PART

A-200-1430 A-200-3540 A-200-3545 A-200-5556

CATEGORY

3 4 5 6

DIM "A"

1 1/8" 1 1/4" 1 1/4" 1 5/16"

DIM "B"

2 5/8" 3 7/32" 3 7/32" 3 47/64"

DIM "C"

4 15/64" 4 15/64" 4 5/16" 4 5/16"

1" X 1 1/8" RECTANGULAR SHAFT PART

A-400-1618 A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

SERIES

14

LENGTH

6'

1 11/16" X 20 SPLINE Induction Hardened PART

A-404-2720

DOMESTIC C.V. DRIVELINES

SERIES

35/44/55

LENGTH

3'

CENTER HOUSING PART

A-550-1430 A-550-3540 A-550-3545 A-550-5556

CATEGORY

3 4 5 6

SERIES

14 35 35/44 55

YOKE & SHAFT Fits all corresponding series tube assemblies PART SERIES

A-10101400 A-10103500 A-10103501 A-10105500 14 35/44 35 55 Category 3 Category 5 Category 4 Category 6

SHAFT SIZE

1" x1 1/8" Rect. 1 11/16" x 20 Spl. 1 5/16" x 20 Spl. 1 11/16" x 20 Spl.

DIM "A" SHAFT SIZE

27 1/4" 27" 27" 27"

80° C.V. DRIVELINE COMPONENTS

METAL GUARD PART

A-911-1448 A-911-1458 A-911-1467 A-911-3548 A-911-3558 A-911-3567 A-911-3573 A-911-3579 A-911-4458 A-911-4473 A-911-5548 A-911-5558 A-911-5567 A-911-5573 A-911-5579

SERIES

14 14 14 35/44 35 35 35 35 44 44 55 55 55 55 55

OVERALL LENGTH

48" 58" 67" 48" 58" 67" 73" 79" 58" 73" 48" 58" 67" 73" 79"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DOMESTIC C.V. DRIVELINES

YOKE TUBE & SLEEVE ASSEMBLY PART

A-11101448 A-11101458 A-11101467 A-11103548 A-11103558 A-11103567 A-11103573 A-11103579 A-11104448 A-11104458 A-11104467 A-11104473 A-11104479 A-11105548 A-11105558 A-11105567 A-11105573 A-11105579

SERIES

14 14 14 35 35 35 35 35 44 44 44 44 44 55 55 55 55 55

DIM "A" BORE

DIM "B" BORE

1" x 1 1/8" Rect. 1" x 1 1/8" Rect. 1" x 1 1/8" Rect.

OVERALL LENGTH

48" 58" 67" 48" 58" 67" 73" 79" 48" 58" 67" 73" 79" 48" 58" 67" 73" 79"

1 5/16"x 20 Spl. 1 5/16"x 20 Spl. 1 5/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl.

80° C.V. JOINT & SHAFT PART

A-15501406 A-15601421 A-15503506 A-15603521 A-15703520 A-15505506 A-15605521 A-15705520

SERIES

14 14 35/44 35/44 35/44 55 55 55

SHAFT SIZE

1" x 1 1/8" Rect. 1" x 1 1/8" Rect. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl.

SHAFT LENGTH

27 1/4" 27 1/4" 27" 27" 27" 27" 27" 27"

TRACTOR YOKE

1 3/8"x 6 Spl. 1 3/8"x 21 Spl. 1 3/8"x 6 Spl. 1 3/8"x 21 Spl. 1 3/4"x 20 Spl. 1 3/8"x 6 Spl. 1 3/8"x 21 Spl. 1 3/4"x 20 Spl.

80° C.V. JOINT & SHAFT HALF WITH GUARD PART SERIES

A-16501406 A-16601421 A-16503506 A-16603521 A-16703520 A-16505506 A-16605521 A-16705520 14 14 35/44 35/44 35/44 55 55 55

SHAFT SIZE

1" x 1 1/8" Rect. 1" x 1 1/8" Rect. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl.

SHAFT LENGTH

27 1/4" 27 1/4" 27" 27" 27" 27" 27" 27"

TRACTOR YOKE

1 3/8"x 6 Spl. 1 3/8"x 21 Spl. 1 3/8"x 6 Spl. 1 3/8"x 21 Spl. 1 3/4"x 20 Spl. 1 3/8"x 6 Spl. 1 3/8"x 21 Spl. 1 3/4"x 20 Spl.

80° C.V. DRIVELINE COMPONENTS

YOKE, TUBE & SLEEVE WITH GUARD PART

A-17501448 A-17501458 A-17501467 A-17503548 A-17503558 A-17503567 A-17503573 A-17503579 A-17504448 A-17504458 A-17504467 A-17504473 A-17504479 A-17505548 A-17505558 A-17505567 A-17505573 A-17505579

SERIES

14 14 14 35 35 35 35 35 44 44 44 44 44 55 55 55 55 55

DIM "A" BORE

1" x 1 1/8" Rect. 1" x 1 1/8" Rect. 1" x 1 1/8" Rect.

DIM "B" BORE

DIM "C"

31 5/8" 41 5/8" 50 5/8" 29 1/4" 39 3/8" 48 1/4" 54 3/8" 58 1/4" 28 7/8" 38 7/8" 47 7/8" 53 7/8" 59 7/8" 28 7/8" 38 7/8" 47 7/8" 53 7/8" 59 7/8"

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

1 5/16"x 20 Spl. 1 5/16"x 20 Spl. 1 5/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl. 1 11/16"x 20 Spl.

DOMESTIC C.V. DRIVELINES

TRACTOR YOKE PART

A-150-1406 A-150-1421 A-151-3506 A-151-3521

SERIES

14 14 35 35

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

SHAFT WELD YOKE PART

A-350-1400

SERIES

14

DIM "A" BORE

1" Rd.

CENTER HOUSING PART

A-555-1400 A-555-3500

SERIES

14 35

TUBE YOKE PART

A-750-3500

SERIES

35

DIM "A" BORE

1 5/8"

ROUND BORE IMPLEMENT YOKE With Keyway & pinhole PART

A-850-1420 A-851-1420 A-850-1422 A-850-3522

SERIES

DIM "A" BORE

1 1/4" 1 1/4" 1 3/8" 1 3/8"

14 (w/1/4" keyway & 2 set screws) 14 (w/1/4" keyway & 3/8" pimhole) 14 (w/5/16" keyway & 1/4" pimhole) 35 (w/5/16" keyway & 1/4" pimhole)

CLAMP IMPLEMENT YOKE With Keyway PART

A-857-1420 A-857-3520 A-857-3524

SERIES

14 35 35

DIM "A" BORE

1 1/4" 1 1/4" 1 1/2"

50° C.V. DRIVELINE COMPONENTS

STOCK BORE IMPLEMENT YOKE PART

A-859-1400 A-859-3500

SERIES

14 35

DIM "A" BORE

1" 1"

GUARD WITH BEARINGS With bearings (920-0259) PART

A-950-1430

YOKE & SHAFT PART

A-10501400

SERIES

14

SHAFT SIZE

1" x 1 1/8" Rect.

DIM "A"

29.38" A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

DOMESTIC C.V. DRIVELINES

YOKE & TUBE PART

A-11501400

SERIES

14

SHAFT SIZE

1 1/4" x 1 3/8"

DIM "A"

34"

JOINT & SHAFT HALF WITH GUARD With Keyway, (2) Set Screws and pinhole PART SERIES

A-16501420 14

DIM "A" BORE

1 1/4" Rd.

DIM "B"

39.63"

CONSTANT VELOCITY JOINT PART

A-18501420 A-18511420

SERIES

14 14

DIM "A" BORE

1 1/4" Rd.* 1 1/4"Rd.**

DIM "B" BORE

1" 1"

BALL SHEAR DEVICE With Spring Lok PART

A-104-1406

DIM "A" BORE

1 3/8" x 6 Spl.

SHEAR BOLT

(1) 5/16" - 18 Gr. 5

BALL SHEAR DEVICE PART

A-104-3506

DIM "A" BORE

1 3/8" x 6 Spl.

SHEAR BOLT

(2) 3/8" - 16 Gr. 5

MODULAR CLUTCH

Modular Clutch

NORTH AMERICAN

Weasler 14,35,44,55 Interchanges with: Neapco 2600 Series and Walterscheid 1480 Series

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

METRIC

Interchanges with: Bondioli and Pavesi, 4, 5, 6, and 8 Series and Walterscheid 2300, 2400 and 2500 Series

MODULAR CLUTCH

[For use on implement end of driveline only]

The drawing illustrates the components of the modular clutch. Each component of the exploded view is identified by an eight-digit stock number to ensure identification. Number Identification Examples:

570-9000 Torque in·lbs Diameter of Clutch Pak 817-3506 6 Spline 35 Series Clamp Yoke for Friction Clutch Implement Yoke 825-4422 1 3/8" Round Bore* 44 Series Round Bore for Friction Clutch Implement Yoke 818-8406 6 Spline By/Py 4 Series and W/S 2300 Series Interchanges with both By/Py and W/S Clamp Yoke for Overrunning Clutch Implement Yoke 970-7000 Diameter of Clutch Pak Friction Disc 990-7000 Diameter of Clutch Pak Separator Plate 821-1406 6 Spline 14 Series Auto-Lok for Overrunning Clutch Implement Yoke

*1/16th Increments

NOTE: Overrunning Clutch Paks must be mated with overrunning yokes

MODULAR CLUTCH

Features And Benefits

· · · · · · · · · · · · · Superior performance Long life Isolates/dissipates heat "User Friendly" - easy to service Easy assembly with 1/2" wrench Free motion - ease of hook-up Minimum adjustment required Auto-Lok available Replacement clutch for most farm implements* Torque setting from 9,000 in·lbs to 18,000 in·lbs Overrunning feature also available Modular construction covers a wide variety of applications Applications for the TorQmaster Modular Clutch: · Spreaders · Mixers · Mower conditioners · Rotary cutters · Flail shredders · Grain carts · Balers · Snowblowers

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

MODULAR CLUTCH

* For use on implement end of driveline only

Instructions for ordering the Modular Clutch

· · · · Determine the driveline series using Transparency Identification System for either North American or Metric applications (see Pages 9 and 50) Identify the connecting shaft size and the method of attachment (eg: clamp, bolt, keyway) Obtain torque setting from owner/operator manual - if available If torque setting is not available, use the following Clutch Pak Selection Guide (Pages 124 and 125) as a guideline for selecting the proper clutch pak · Order clutch yoke and clutch pak separately by stock number · For installation, attach clutch yoke to the driveline first, then mount the clutch pak to the clutch yoke · Use the modular clutch on the implement end of the driveline only · If the implement input connection guard is removed for service, re-install the guard before using the machine · Some implements (eg: mower conditioner, flail shredder) require an overrunning feature incorporated into the clutch. If the replacement clutch requires this feature, order the appropriate overrunning modular clutch and overrunning clutch yoke.

MODULAR CLUTCH

Clutch Pak Selection Guide

Spreader

Friction Clutch Stock Number Overrunning Clutch Stock Number 540 RPM in·lb·torque 1000 RPM in·lb·torque Capacity: Less than 240 Bushels or 150 cu.ft. A-57012000 A-57112000 12000

Mower Conditioner

Friction Clutch Stock Number Overrunning Clutch Stock Number 540 RPM in·lb·torque 1000 RPM in·lb·torque Sickle Bar - less than 10 feet A-57012000 A-57112000 12000

Capacity: Between 241-400 Bushels or 151 - 250 cu.ft. A-57012000 A-57015000 A-57112000 A-57115000 12000 15000

Sickle Bar - 10 - 13 feet A-57012000 A-57015000 A-57112000 A-57115000 12000 15000

Capacity: Between 401-560 Bushels or 251 - 350 cu.ft.

Sickle Bar - 14 - 17 feet 15000 A-57015000 A-57018000 A-57115000 A-57118000 15000 18000

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

A-57015000 A-57018000

A-57115000 A-57118000

18000

Capacity: Greater than 560 Bushels or 350 cu.ft. A-57018000 A-57018000 A-57118000 A-57118000 18000 18000 Friction Clutch Stock Number Overrunning Clutch Stock Number 540 RPM in·lb·torque 1000 RPM in·lb·torque

Rotary Disk - less than 10 feet

MODULAR CLUTCH

Mixer

Friction Clutch Stock Number Overrunning Clutch Stock Number 540 RPM in·lb·torque 1000 RPM in·lb·torque Capacity: Less than 240 Bushels or 150 cu.ft. A-57012000 A-57112000 12000

A-57012000

A-57112000

12000

Rotary Disk - 11 - 13 feet A-57015000 A-57115000 15000

Rotary Disk - 14 - 17 feet A-57018000 12000 A-57118000 18000

Capacity: Between 241-400 Bushels or 151 - 250 cu.ft. A-57012000 A-57015000 A-57112000 A-57115000

15000

Capacity: Between 401-560 Bushels or 251 - 350 cu.ft. A-57015000 A-57018000 A-57115000 A-57118000 18000 15000

Capacity: Greater than 560 Bushels or 350 cu.ft. A-57018000 A-57018000 A-57118000 A-57118000 18000 18000

Rotary Cutter

1 Clutch/Machine Friction Clutch Stock Number Overrunning Clutch Stock Number 540 RPM in·lb·torque 1000 RPM in·lb·torque

Snowblowers

Friction Clutch Stock Number Width of Cut: Less than 60". A-57012000 A-57015000 Width of Cut: 61" - 70" A-57015000 A-57018000 Width of Cut: 71" - 80" A-57018000 A-57018000 Width of Cut: 81" - 90" A-57018000 Width of Cut: Greater than 90" A-57018000 N/A 18000 N/A 18000 18000 18000 15000 18000 12000 15000 540 RPM in·lb·torque 1000 RPM in·lb·torque

Deck Width - 4 - 7 feet A-570-9000 A-57012000 571-9000 57112000 9000 / 12000 12000

Deck Width - 8 - 13 feet A-57012000 A-57015000 57112000 57115000 12000 15000

Deck Width - 14 - 16 feet A-57015000 A-57018000 57115000 57118000 15000 18000

Deck Width - 17 - 20 feet A-57018000 A-57018000 57118000 57118000 18000 18000

Deck Width - larger than 20 feet A-57018000 57118000 18000

MODULAR CLUTCH

Clutch Pak Selection Guide

Rotary Cutter cont.

1 Clutch/Section Friction Clutch Stock Number Overrunning Clutch Stock Number 540 RPM in·lb·torque 1000 RPM in·lb·torque

*If you have an implement that does NOT appear in the above Clutch Pak Selection Guide, use the following chart as a general guideline for selecting the proper Clutch Pak. North American

14 Series

Metric

Bondioli & Pavesi 4 Series Walterscheid 2300 Series Bondioli & Pavesi 5 Series Walterscheid 2400 Series Bondioli & Pavesi 6 & 7 Series Walterscheid II Series Bondioli & Pavesi 8 Series Walterscheid 2500 Series

Stock Number

A-57012000 A-57015000 A-57018000 A-57018000

Section Width - 4 - 6 feet A-570-9000 A-57012000 A-570-9000 A-57112000 9000 / 12000 12000

35 Series 44 Series 55 Series

Section Width - greater than 6 feet A-57012000 A-57015000 A-57112000 A-57115000 12000 15000

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

Flail Shredder

* See Page 123 for Clutch Pak ordering information

540 RPM in·lb·torque 1000 RPM in·lb·torque

MODULAR CLUTCH

Friction Clutch Stock Number Less than 10 feet A-57015000 A-57018000 10 - 15 feet A-57018000 A-57018000 Greater than 15 feet A-57018000

Overrunning Clutch Stock Number

Clutch Pak Product Information

Adjustment detail - 7" and 9" Clutch Paks · No spring adjustment required · Tighten bolts to 30 ft-lbs (max)

A-57115000 A-57118000 18000

15000

A-57118000 A-57118000

18000 18000

18000

You will find some overlap within an implement category in the Clutch Pak Selection Guide. The operator will generally know if he has a heavy duty or light duty application. If in doubt, always protect the driveline...refer to the "general guideline for selecting proper clutch pak" on this page.

Round Baler

Friction Clutch Stock Number Overrunning Clutch Stock Number 540 RPM in·lb·torque 1000 RPM in·lb·torque Bale Weight - less than 600 lbs. A-57012000 A-57112000 12000

Bale Weight - 600 - 1500 lbs. A-57012000 A-57015000 A-57112000 A-57115000 12000 15000

Bale Weight - 1501 - 2500 lbs. A-57015000 A-57018000 A-57115000 A-57118000 18000 15000

Grain Cart

Friction Clutch Stock Number A-57012000 Overrunning Clutch Stock Number 57112000 540 RPM in·lb·torque 12000 1000 RPM in·lb·torque

MODULAR CLUTCH COMPONENTS

CLUTCH PAK PART

A-570-9000 A-57012000 A-57015000 A-57018000 A-59010000 A-59015000 A-59018000

IN·LBS

9000 12000 15000 18000 10000 15000 18000

DIM. "A"

7" 7" 7" 7" 9.36" 9.36" 9.36"

14 SERIES CLAMP YOKE PART

A-817-1406 A-817-1421

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

14 SERIES CLAMP YOKE PART

A-817-1420

DIM "A" BORE

1 3/4" x 20 Spl.

MODULAR CLUTCH

14 SERIES AUTO-LOK YOKE PART

A-820-1406 A-820-1420 A-820-1421

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

14 SERIES ROUND BORE YOKE PART

A-825-1420 A-825-1422

DIM "A" BORE

1 1/4" Rd. 1 3/8" Rd.

35 SERIES CLAMP YOKE PART

A-817-3506 A-817-3521 A-817-3524

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

DIM "B" BORE

1 1/2" Rd.

35 SERIES CLAMP YOKE PART

A-817-3520

DIM "A" BORE

1 3/4" x 20 Spl.

35 SERIES AUTO-LOK YOKE PART

A-820-3506 A-820-3520 A-820-3521

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

35 SERIES ROUND BORE YOKE PART

A-825-3520 A-825-3522 A-825-3524 A-827-3528

DIM "A" BORE

1 1/4" Rd. Dbl.KW 1 3/8" Rd. 1 1/2" Rd.

DIM "B" BORE

1 3/4" Rd.

MODULAR CLUTCH COMPONENTS

44 SERIES CLAMP YOKE PART

A-817-4406 A-817-4421 A-817-4424

DIM "A"

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

DIM "B"

1 1/2" Rd.

44 SERIES CLAMP YOKE PART

A-817-4420

DIM "A" BORE

1 3/4" x 20 Spl.

44 SERIES AUTO-LOK YOKE PART

A-820-4406 A-820-4420 A-820-4421

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl. A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

44 SERIES ROUND BORE YOKE PART

DIM "A" BORE

1 1/4" Rd. 1 3/8" Rd.

DIM "B" BORE

MODULAR CLUTCH

A-825-4420 A-825-4422 A-827-4432

2" Rd.

55 SERIES CLAMP YOKE PART

A-817-5506 A-817-5521

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

55 SERIES CLAMP YOKE PART

A-817-5520 A-817-5527

DIM "A" BORE

1 3/4" x 20 Spl. 1 3/4" x 27 Spl.

55 SERIES AUTO-LOK YOKE PART

A-820-5506 A-820-5520 A-820-5521

DIM "A" BORE

1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

55 SERIES ROUND BORE YOKE PART

A-825-5522 A-825-5528 A-827-5532

DIM "A" BORE

1 3/8" Rd. 1 3/4" Rd.

DIM "B" BORE

2" Rd.

WALTERSCHEID 1480 SERIES & NEAPCO 2600 SERIES CLAMP YOKE PART DIM "A" BORE

A-817-2606 A-817-2621 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

WALTERSCHEID 1480 SERIES & NEAPCO 2600 SERIES CLAMP YOKE PART DIM "A" BORE

A-817-2620 1 3/4" x 20 Spl.

MODULAR CLUTCH COMPONENTS

WALTERSCHEID 1480 SERIES & NEAPCO 2600 SERIES ROUND BORE YOKE PART DIM "A" BORE

A-825-2622 1 3/8" Rd.

BONDIOLI & PAVESI 4 SERIES & WALTERSCHEID 2300 SERIES CLAMP YOKE PART DIM "A" BORE

A-817-8406 A-817-8420 A-817-8421 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

BONDIOLI & PAVESI 4 SERIES & WALTERSCHEID 2300 SERIES CLAMP YOKE PART DIM "A" BORE

A-825-8422 A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. 1 3/8" Rd.

BONDIOLI & PAVESI 5 SERIES CLAMP YOKE PART DIM "A" BORE

A-817-6506 A-817-6520 A-817-6521 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

MODULAR CLUTCH

BONDIOLI & PAVESI 5 SERIES ROUND BORE YOKE PART DIM "A" BORE

A-825-6522 A-825-6524 1 3/8" Rd. 1 1/2" Rd.

BONDIOLI & PAVESI 6 SERIES & WALTERSCHEID 220 SERIES CLAMP YOKE PART DIM "A" BORE DIM "B" BORE

A-817-8606 A-817-8620 A-817-8621 A-817-8624 A-817-8628 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl. 1 1/2" Rd. 1 3/4" x 6 Spl.

BONDIOLI & PAVESI 6 SERIES & WALTERSCHEID 220 SERIES ROUND BORE YOKE PART DIM "A" BORE

A-825-8622 A-825-8624 1 3/8" Rd. 1 1/2" Rd.

BONDIOLI & PAVESI 8 SERIES CLAMP YOKE PART DIM "A" BORE

A-817-6806 A-817-6821 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

BONDIOLI & PAVESI 8 SERIES CLAMP YOKE PART DIM "A" BORE

A-817-6820 A-817-6828 1 3/4" x 20 Spl. 1 3/4" x 6 Spl.

BONDIOLI & PAVESI 8 SERIES ROUND BORE YOKE PART DIM "A" BORE

A-825-6822 1 3/8" Rd.

MODULAR CLUTCH COMPONENTS

WALTERSCHEID 2400 SERIES CLAMP YOKE PART DIM "A" BORE

A-817-7606 A-817-7621 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

WALTERSCHEID 2400 SERIES CLAMP YOKE PART DIM "A" BORE

A-817-7620 1 3/4" x 20 Spl.

WALTERSCHEID 2400 SERIES ROUND BORE YOKE PART DIM "A" BORE

A-825-7622 A-825-7628 1 3/8" Rd. 1 3/4" Rd. A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

WALTERSCHEID 2500 SERIES CLAMP YOKE PART DIM "A" BORE

MODULAR CLUTCH

A-817-7906 A-817-7921

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

WALTERSCHEID 2500 SERIES CLAMP YOKE PART DIM "A" BORE

A-817-7920 1 3/4" x 20 Spl.

WALTERSCHEID 2500 SERIES ROUND BORE YOKE PART DIM "A" BORE

A-825-7922 A-825-7928 A-827-7932 1 3/8" Rd. 1 3/4" Rd.

DIM "B" BORE

2" Rd.

7" & 9" FRICTION DISC PART

A-970-7000 A-970-9000

DIM "A" O.D.

6.20" 7.95"

7" & 9" SPRING PART

A-987-9000 A-98712000 A-98715000 A-98718000 A-98910000 A-98915000 A-98918000

DIM "A" O.D.

6.188" 6.188" 6.188" 6.188" 8.00" 7.81" 7.87"

DIM "B" THICKNESS

.138" .158" .169" .189" .158" .169" .189"

COLOR CODE

Blue Green Yellow White Blue Yellow Red

7" & 9" SEPARATOR PLATE PART

A-990-7000 A-990-9000

DIM "A" O.D.

6.20" 8.07"

6.20"

991-7000 991-9000

MODULAR CLUTCH COMPONENTS

OVERRUNNING CLUTCH PAK PART

A-571-9000 A-57012000 A-57115000 A-57118000 A-59110000 A-59115000 A-59118000

IN·LBS

9000 12000 15000 18000 10000 15000 18000

DIM. "A"

7" 7" 7" 7" 9.36" 9.36" 9.36"

14 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-1406 A-818-1421 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

14 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-1420 1 3/4" x 20 Spl.

MODULAR CLUTCH

14 SERIES OVERRUNNING AUTO-LOK YOKE PART DIM "A" BORE

A-821-1406 A-821-1420 A-821-1421 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

14 SERIES OVERRUNNINGROUND BORE YOKE PART DIM "A" BORE

A-826-1420 A-826-1422 1 1/4" Rd. 1 3/8" Rd.

35 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-3506 A-818-3521 A-818-3524 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

DIM "B" BORE

1 1/2" Rd.

35 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-3520 1 3/4" x 20 Spl.

35 SERIES OVERRUNNING AUTO-LOK YOKE PART DIM "A" BORE

A-821-3506 A-821-3520 A-821-3521 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

35 SERIES OVERRUNNINGROUND BORE YOKE PART DIM "A" BORE

A-826-3520 A-826-3522 A-826-3524 A-826-3528 1 1/4" Rd. Dbl.KW 1 3/8" Rd. 1 1/2" Rd.

DIM "B" BORE

1 3/4" Rd.

MODULAR CLUTCH COMPONENTS

44 SERIES OVERRUNNING CLAMP YOKE PART DIM "A"

A-818-4406 A-818-4421 A-818-4424 1 3/8" x 6 Spl. 1 3/8" x 21 Spl. 1 1/2" Rd.

DIM "B"

44 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-4420 1 3/4" x 20 Spl.

44 SERIES OVERRUNNING AUTO-LOK YOKE PART DIM "A" BORE

A-821-4406 A-821-4420 A-821-4421 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl. A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

44 SERIES OVERRUNNINGROUND BORE YOKE PART DIM "A" BORE

MODULAR CLUTCH

A-826-4420 A-826-4422

1 1/4" Rd. 1 3/8" Rd.

55 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-5506 A-818-5521 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

55 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-5520 A-818-5527 1 3/4" x 20 Spl. 1 3/4" x 27 Spl.

55 SERIES OVERRUNNING AUTO-LOK YOKE PART DIM "A" BORE

A-821-5506 A-821-5520 A-821-5521 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

55 SERIES OVERRUNNINGROUND BORE YOKE PART DIM "A" BORE

A-826-5522 A-826-5528 1 3/8" Rd. 1 3/4" Rd.

WALTERSCHEID 1480 SERIES & NEAPCO 2600 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-2606 A-818-2621 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

WALTERSCHEID 1480 SERIES & NEAPCO 2600 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-2620 1 3/4" x 20 Spl.

MODULAR CLUTCH COMPONENTS

WALTERSCHEID 1480 SERIES & NEAPCO 2600 SERIES OVERRUNNING ROUND BORE YOKE PART DIM "A" BORE

A-826-2622 1 3/8" Rd.

BONDIOLI & PAVESI 4 SERIES & WALTERSCHEID 2300 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-8406 A-818-8420 A-818-8421 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

BONDIOLI & PAVESI 4 SERIES & WALTERSCHEID 2300 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-826-8422 A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand. 1 3/8" Rd.

BONDIOLI & PAVESI 5 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-6506 A-818-6520 A-818-6521 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl.

MODULAR CLUTCH

BONDIOLI & PAVESI 5 SERIES OVERRUNNING ROUND BORE YOKE PART DIM "A" BORE

A-826-6522 A-826-6524 1 3/8" Rd. 1 1/2" Rd.

BONDIOLI & PAVESI 6 SERIES & WALTERSCHEID 220 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE DIM "B" BORE

A-818-8606 A-818-8620 A-818-8621 A-818-8624 A-818-8628 1 3/8" x 6 Spl. 1 3/4" x 20 Spl. 1 3/8" x 21 Spl. 1 1/2" Rd. 1 3/4" x 6 Spl.

BONDIOLI & PAVESI 6 SERIES & WALTERSCHEID 220 SERIES OVERRUNNING ROUND BORE YOKE PART DIM "A" BORE

A-826-8622 A-826-8624 1 3/8" Rd. 1 1/2" Rd.

BONDIOLI & PAVESI 8 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-6806 A-818-6821 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

BONDIOLI & PAVESI 8 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-6820 A-818-6828 1 3/4" x 20 Spl. 1 3/4" x 6 Spl.

BONDIOLI & PAVESI 8 SERIES OVERRUNNING ROUND BORE YOKE PART DIM "A" BORE

A-826-6822 1 3/8" Rd.

MODULAR CLUTCH COMPONENTS

WALTERSCHEID 2400 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-7606 A-818-7621 1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

WALTERSCHEID 2400 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-7620 1 3/4" x 20 Spl.

WALTERSCHEID 2400 SERIES OVERRUNNING ROUND BORE YOKE PART DIM "A" BORE

A-826-7622 A-826-7628 1 3/8" Rd. 1 3/4" Rd. A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

WALTERSCHEID 2500 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

MODULAR CLUTCH

A-818-7906 A-818-7921

1 3/8" x 6 Spl. 1 3/8" x 21 Spl.

WALTERSCHEID 2500 SERIES OVERRUNNING CLAMP YOKE PART DIM "A" BORE

A-818-7920 1 3/4" x 20 Spl.

WALTERSCHEID 2500 SERIES OVERRUNNING ROUND BORE YOKE PART DIM "A" BORE

A-826-7922 A-826-7928 1 3/8" Rd. 1 3/4" Rd.

7" & 9" OVERRUNNING SEPARATOR PLATE PART DIM "B" O.D.

A-991-7000 A-991-9000 6.20" 8.07"

7" & 9" OVERRUNNING CLUTCH REPAIR KIT Contains: (1) Collar (2) Dogs (2) Leaf Springs (1) Wave Spring (1) Washer (1) Retaining Ring (1) Instruction PART

A-980-7000

Assembly Instructions for the

Modular Clutch

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with any major brand.

MODULAR CLUTCH

Run-In of the

TOOLS REQUIRED:

(1) 1/2" box wrench or socket

Modular Clutch

(Instructions)

If the clutch has not been operated for (1) season we recommend the following:

1. Make sure the tractor is off and the PTO is disengaged. 2. Disconnect the driveline from the tractor. 3. Locate the bolts on the O.D. of the clutch pak. Loosen the bolts until all are finger tight, then tighten each one half a turn. 4. Attach the implement to the tractor at the hitch pin, and the driveline to the tractor PTO. 5. Turn the tractor on. Engage the PTO clutch and run for a few seconds, or until the clutch visibly smokes. 6. Disengage the tractor PTO and shut off the tractor. 7. Disconnect the driveline from the tractor. 8. Tighten the bolts on the O.D. of the clutch pak until the compression plate is in full contact with the housing. 9. If the clutch contains an integral overrunning clutch, make sure the clutch spins freely in one direction.

Information

Ag Supply - Driveline Components

116 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

249958


You might also be interested in

BETA
bob
Microsoft Word - CATALOGUE_2009.doc
Visual FoxPro