Read resume-shaik%20zainuddin-Sep%201,%202011.pdf text version

SHAIK ZAINUDDIN Assistant Professor Materials Science and Engineering 100 Chappie James Center, Tuskegee University, Tuskegee, AL 36088 Tel.: (334) 7244222, Fax: (334) 7244224 Email: [email protected]

Education Ph.D., Materials Science & Engineering, Tuskegee University M.S., Mechanical Engineering, Tuskegee University B. E., Mechanical Engineering, Osmania University Appointments From July 2011June 2010-Present May 2009- May 2010 Jan. 2008 ­ Dec. 2008

Assistant Professor, Materials Science and Engineering, Tuskegee University, AL. Research Assistant Professor, Materials Science and Engineering, Tuskegee University, AL. Research Associate, Materials Science and Engineering, Tuskegee University, AL. Teacher, Mechanical Engineering, Tuskegee University, AL

Research Interest Experimental Mechanics and Stress Analysis, Composite Materials and Sandwich Structures, Nanomaterials and Nanocomposites, Environmental effects, Low Velocity and High Strain Rate Testing, Damage Characterization and Failure Analyses, Finite Element Methods and Analysis Teaching MENG 211: Statics, MENG 316: Strength of Materials, MENG 319: Advanced Materials Lab, MENG 420: Computer Aided Design and Methods, MENG 541/MSEG 641: Composite Materials, MSEG 610: Materials Science and Engineering, MSEG 613: Mechanical Behavior of Materials. Book Chapters 1. Hassan Mahfuz, Shaik Zainuddin, Mohammed F. Uddin, Vijaya K. Rangari and Shaik Jeelani, "Fatigue of pure and nanophased sandwich composites under shear loading," Sandwich Structures 7: Advancing with Sandwich Structures and Materials, Springer Netherlands, pp. 183-192, 2006. 2. Shaik Zainuddin, Mahesh Hosur, Ashok Kumar and Shaik Jeelani, "Effects of ultraviolet radiation and condensation on static and dynamic compressive behavior of nanophased glass/ epoxy composites," book chapter in FRP Composites and Sustainability, Editor: Ravi Jain, to be published by Springer (accepted). Refereed Journals (Recent Publications) 1. S. Zainuddin, M. V. Hosur, R. Barua, Ashok Kumar and S. Jeelani, "Effects of ultraviolet radiation and condensation on static and high strain rate compression behavior of nanoclay infused glass/ epoxy composites," Journal of Composite Materials, doi: 10.1177/0021998310394693, 2011. 2. S. Zainuddin, M. V. Hosur, Y. Zhou, Alfred T. Narteh, A. Kumar, and S. Jeelani, "Experimental and

numerical investigations on flexure and thermal properties of nanoclay-epoxy nanocomposites," Materials Science Engineering A, 527, pp. 7920-7926, 2010. 3. S. Zainuddin, M. V. Hosur, A. Kumar, and S. Jeelani, "Environmental Effects on the Flexural Performance of Neat and Nanophased Glass Fiber Reinforced Plastic Composites "Durability Study of Neat/Nanophased GFRP Composites Subjected to Different Environmental Conditioning," Materials Science and Engineering A, 527, pp. 3091-3099, 2010. 4. S. Zainuddin, H. Mahfuz, S. Jeelani, "Enhancing Fatigue Performance of Sandwich Composites with Nanophased Core," Journal of Nanomaterials, 2010, doi:10.1155/2010/712731, 2010. 5. Rajib Barua, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar, Jonathan Trovillion, and Yadira Perez, "Processing and characterization of epoxy nanocomposites with MWCNTs/CNFs using thinky and 3-roll shear mixing techniques," Revista Matéria, 15, pp. 247­253, 2010. 6. S. Zainuddin, M. V. Hosur, Y. Zhou, A. Kumar, S. Jeelani, "Durability studies of montmorillonite clay filled epoxy composites under different environmental conditions," Materials Science and Engineering A, 507, pp. 117­123, 2009. 7. M. F. Uddin, H. Mahfuz, S. Zainuddin, S. Jeelani, "Improving Ballistic Performance of Polyurethane Foam by Nanoparticle Reinforcement," Journal of Nanotechnology, 2009, doi:10.1155/2009/794740, 2009. 8. M.V. Hosur, A. A. Mohammed, S. Zainuddin, S. Jeelani, "Processing of nanoclay filled sandwich composites and their response to low-velocity impact loading," Composite Structures 82, pp. 101116, 2008. 9. M.V. Hosur, A. A. Mohammed, S. Zainuddin, S. Jeelani, "Low- Velocity impact performance of nanophased foam- core sandwich composites," Materials Science and Engineering A 498, pp. 100­ 109, 2008. 10. H. Mahfuz, S. Zainuddin, Vijaya K. Rangari, S. Jeelani, M. R. Parker, T. Al-Saadi, "Enhancement of strength and stiffness of SC-15 epoxy through CNT/CNF reinforcement under high magnetic fields," Journal of Materials Science 44, pp. 1113- 1120, 2009. 11. H. Mahfuz, S. Zainuddin, Vijaya K. Rangari, S. Jeelani, M. R. Parker, T. Al-Saadi, "Enhancement of strength and stiffness of epoxy- based composites using nanoparticle infusion and high magnetic fields," Journal of Material letters 61, pp. 2535­2539, 2007. 12. H. Mahfuz, M. Uddin, Vijaya K. Rangari, M. Saha, S. Zainuddin, S. Jeelani, "High strain rate response of sandwich composites with nanophased cores," Applied Composite Materials 12, pp. 193211, 2005. Papers submitted 13. S. Zainuddin, M. V. Hosur, H. Rao, R. Barua, A. Kumar, J. Trovillion, S. Jeelani, "Effect of dispersing media and influence of amine functionalized multi-walled carbon nanotube reinforcement on mechanical and thermal properties of epoxy nanocomposites," Submitted in Journal of Nanoscience and Nanotechnology, 2011. 14. R. Barua, M. V. Hosur, S. Zainuddin, A. Kumar, and S. Jeelani, "Effect of Processing Technique on the Performance of Epoxy/MWCNT Nanocomposites," Submitted, Journal of Applied Polymer Science, 2011. 15. R. Barua, M. V. Hosur, S. Zainuddin, A. Kumar, and S. Jeelani, "Rheology, Flexure and Thermomechanical Characterization of Epoxy/CNF Nanocomposites," Submitted in Journal of Composite Materials, 2011.

Conference Publications/Presentations 1. M.B.A. Salam, S. Zainuddin, M. V. Hosur, M. M. Rahman, J. Holly Jr., S. Jeelani, "Mechanical and thermal investigation of NH2 functionalized multi-walled carbon nanotube epoxy nanocomposite", SAMPE TECH, Fort Worth, TX, Oct. 17-20, 2011. 2. M. M. Rahman, S. Zainuddin, M. V. Hosur, C. J. Robertson, M.B.A. Salam, Ashok Kumar, S. Jeelani, "Experimental investigation of E-glass/epoxy composites modified using NH2 functionalized multi-walled carbon nanotubes through sonication and calendaring methods", SAMPE TECH, Fort Worth, TX, Oct. 17-20, 2011. 3. Shaik Zainuddin, Mahesh Hosur, Harish Rao, Rajib Barua, Shaik Jeelani, Ashok Kumar, Jonathan Trovillion, "Influence of Non-Functionalized and Functionalized MWCNTs on Mechanical and Thermal Properties of Epoxy Composites", International Mechanical Engineering Congress and Exposition, IMECE 2010, Vancouver, Canada, 12-18 November, 2010. 4. Alfred Tcherbi-Narteh, Mahesh V. Hosur, Shaik Zainuddin, Shaik Jeelani, "Compression and Flexural Response of Carbon/Epoxy-Nanoclay Nanocomposites Subjected to UV Radiation and Condensation", International Mechanical Engineering Congress and Exposition, IMECE 2010, Vancouver, Canada, 12-18 November, 2010. 5. Amir Usher, Mahesh Hosur, Gregory Strawder, Shaik Zainuddin, Shaik Jeelani, "Studies on the thermal and mechanical behavior for low density polyurethane foam nanocomposites", International Mechanical Engineering Congress and Exposition, IMECE 2010, Vancouver, Canada, November 1218, 2010. (presentation) 6. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani, "Static and High Strain Rate Compression Response of Carbon/Epoxy-Nanoclay Composites Subjected to Synergistic Effect of UV Radiation and Condensation" , 7th Asian Australasian Conference on Composite Materials, ACCM-7, Taipei, Taiwan, 15-18 November, 2010. 7. S. Zainuddin, M. V. Hosur, R. Barua, H. Rao and S. Jeelani, "Influence of amino functionalized multi-walled carbon nanotube reinforcement on the mechanical and thermal properties of SC-15 epoxy nanocomposite", ,,nano Future, for the 21st Century, International conference on "Nanotechnology ­ Materials and Composites for Frontier Applications", Pune, India,14-15 October, 2010. 8. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani "Compression and Flexural Response of Carbon/Epoxy-Nanoclay Nanocomposites Subjected to UV Radiation and Condensation" , SAMPE Fall Conference 2010, Salt Lake City, UT, 11-14 October, 2010. 9. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, "Processing and Characterization of VGCNF Infused Epoxy Nanocomposites Using Three Different Techniques", SAMPE Fall Conference 2010, Salt Lake City, UT, 11-14 October, 2010. 10. Mahesh V. Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar, Jonathan Trovillion, "Processing Optimization and Characterization of MWCNT infused Epoxy Nanocomposites Using Three Different Techniques", proceedings of the American Society for Composites, Dayton, OH, 1921 September, 2010. 11. M.V. Hosur, A. Agubra, S. Zainuddin, S. Jeelani, "Effect of Processing Methods on the Mechanical Behavior of Nanoclay infused Epoxy/ Glass Nanocomposites", 16th U.S. National Congress of Theoretical and Applied Mechanics Conference, Penn state, PA, June 27-July 2, 2010. (presentation) 12. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar, Jonathan Trovillion, Yadira Perez, "Processing and Characterization of Epoxy Nanocomposites with MWCNTs/CNFs

Using Thinky and 3-Roll Shear Mixing Techniques", 1st TMS-ABM International Materials Congress, Rio de Janeiro, Brazil, July, 2010. 13. S. Zainuddin, M. V. Hosur, R. Barua, and A. V. Anafo, Ashok Kumar and S. Jeelani, "Effects of Ultraviolet Radiation and Condensation on Static and High Strain Rate Behavior of Nanophased Glass/ Epoxy Composites", The 1st joint American- Canadian International Conference on Composites, Delaware, DE, September, 2009. 14. S. Zainuddin, M.V. Hosur, A. Kumar, S. Jeelani, "Durability Studies of Nanophased FRP Composites under synergistic exposure conditions", International Conference on Composite Materials, ICCM-17, Edinburgh, UK, July, 2009. 15. S. Zainuddin, M. V. Hosur, A. Tcherbi-Narteh, Ashok Kumar and S. Jeelani, "Dynamic Compression Response of Nanophased Composites Subjected to UV Radiation", Society for Experimental Mechanics (SEM), Albuquerque, NM, June, 2009. 16. S. Zainuddin, M. V. Hosur, Y. Zhou, Ashok Kumar and S. Jeelani, "Characterization of neat and nanophased epoxy polymers subjected to accelerated aging conditions", American Society for Composites, Memphis, TN, September, 2008. 17. S. Zainuddin, M. V. Hosur, Y. Zhou, Ashok Kumar and S. Jeelani, "Durability Study of Neat/ Nanophased GFRP Composites Under Different Environmental Conditioning", American Society for Composites, Memphis, TN, September, 2008. 18. M. R. Parker, Y. Dwivedi, T. Al- Saadi, S. Zainuddin, H. Mahfuz, V. K. Rangari, S. Jeelani, " Enhancement of mechanical properties of epoxy- based nanocomposites using high magnetic fields", ICM Conference, Scotland, 2006. 19. H. Mahfuz, S. Zainuddin, M. F. Uddin, V.K. Rangari, S. Jeelani, M. R. Parker, T. Al- Saadi, "Response of magnetically flocculated nanophased composites under dynamic loading", American Society for Composites, Philadelphia, PA, 2005. 20. H. Mahfuz, S. Zainuddin, M. R. Parker, T. Al-Saadi, "Improvements in high specific strength epoxybased composites using high magnetic fields", Nanotech, Anaheim, CA, 2005. 21. H. Mahfuz, S. Zainuddin, V. K. Rangari, S. Jeelani, M. R. Parker, T. Al-Saadi, "Infusion of carbon nanotubes and carbon nanofibers into SC-15 epoxy; An investigation of the influence of high magnetic fields", SAMPE, Anaheim, CA, 2005. 22. Mohammed Farid Uddin, Hassan Mahfuz, Shaik Zainuddin, Shaik Jeelani, "Anisotropic behavior of rigid polyurethane foam with acicular nanoparticles infusion under high strain rate", American Society of Composites, Philadelphia, PA, 2005. 23. M. F. Uddin, H. Mahfuz, S. Zainuddin, S. Jeelani, "Infusion of spherical and acicular nanoparticles into polyurethane foam and their influences on dynamic performances", Society of Experimental Mechanics, Portland, OR, 2005. Technical Reports 1. M. V. Hosur, S. Zainuddin, "Processing and Performance Evaluation of Fiber Reinforced Polymeric Composites with Carbon Nanotube/Nanofibers", W9132T-09-C-0010, U.S. Army Engineer Research and Development Center- Construction Engineering Research Laboratory (ERDC-CERL), June 2011. 2. M. V. Hosur, S. Zainuddin, Y. Zhou, "Project Title: Durability and Life Assessment of Fiber Reinforced Polymer (FRP) Composites for Army Facilities: Experimentation, Modeling and Validation", W9132T-08-C-0021, U.S. Army Engineer Research and Development Center-

Construction Engineering Research Laboratory (ERDC-CERL), May 2009. 3. M. V. Hosur, S. Zainuddin, Y. Zhou, "Durability and Life Prediction of Nanophased Fiber Reinforced Polymer Composites for Army Facilities", U.S. Army Engineer Research and Development CenterConstruction Engineering Research Laboratory (ERDC-CERL), Contract No. W9132T-08-P-0010, March 2009. GRADUATE STUDENTS Current- Advisor: Maqsud Rahman (MS), Brandon Georgetown(MS), Co-Advisor: Alfred T. Narteh (PhD), Morgan Davis (PhD), Vetronica Powell (PhD), Mahmud bin Abdus Salam (MS), Nusrat Jahan (MS), Completed-Co-Advisor: Amir Usher (MS), Anafo V. Agubra (MS), Rajib Barua (MS) UNDERGRADUATE STUDENTS CO-ADVISED AND MENTORED Current- Jonathan E. Malone, Cheo White, Felicia Horne, Completed- James Holly Jr., Aaron Peterson, Charles Robertson, Lauren Kornegey, Erica Nelums, Leon Headley, Warren Collier, Whitney Tarver PROFESSIONAL SERVICES Reviewer: Journal of Nano Research (JNN), Journal of Materials Science (JMS), Journal of Multidiscipline Modeling in Materials and Structures (MMMS), Journal of Chemical Engineering and Materials Science (JCEMS), American Society of Mechanical Engineering (ASME), Topic Organizer/ Co-Organizer: Organizer- Design and Manufacturing of Composites, Maintenance Considerations and Recycling, Co-Organizer- Durability and Life Prediction of Advanced Materials, ASME-IMECE, Denver Colorado, 2011, Session Chair and Session Organizer: Manufacturing of Composite, ASME-IMECE, Vancouver Canada, 2010, Coordinator: Tuskegee Center for Advanced Materials (T-CAM) Annual Student Seminar 2009& 2010, Tuskegee University, AL 36088, Judge: Second Joint Annual Research Symposium (12th Annual HBCU-UP, 38th Annual Sigma Xi), 2011, Louis Stoke for Minority Participation (LSAMP) and Bridge to Doctorate (BD) Poster Competition. Organizer & Judge: National Mouse Trap Car Competition, SECME, 2008, Tuskegee University, AL 36088, Mentor: High School Students- K12, Agri- Trek, 2008- Present, Tuskegee University, AL 36088. PROFESSIONAL AFFILIATION Member- Society of Experimental Mechanics (SEM), American Society of Composites (ASC), Materials Research Society (MRS), Society for the Advancement of Material and Process Engineering (SAMPE) HONORS AND AWARDS Outstanding Faculty Performance Award for Teaching, College of Engineering and Physical Sciences, Tuskegee University, 2010-2011 Member of Whos Who in North America, 2011/2012 Selected for Biltmore Whos Who Among Executive and Professionals, 2012 Selected for Biltmore Whos Who Member in North America Education Graduate Research Scholars Award, Alabama EPSCoR 2008 Graduate Research Assistantship Award, 2006-2009, 2002- 2005, Tuskegee University First Place Award at Sigma Xi Student Research Symposium, Tuskegee, AL, April 2005

Information

5 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

1136842


You might also be interested in

BETA
Shaik Jeelani, Ph