Read 60231.p65 text version

GREASE INTERCEPTOR WITH EXTENSION, ANCHOR FLANGE AND CLAMP COLLAR

Z-1170-E-KC

SPECIFICATION SHEET

TAG _____

Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice

Size

100 200 300 400 500 600 700 800

Inlet/ Outlet Size** 2 [50]

Flow Rate G.P.M. [L] 4 7 10 15 20 25 35 50 [15] [26] [38] [57] [76] [94] [132] [189]

Capacity Water Grease Gal. [L] 3 5 6 10 16 21 30 40 Lbs. [kg] [4] [6] [9] [14] [18] [23] [32] [45] [11] 8 [19] 14 [23] 20 [38] 30 [60] 40 [79] 50 [113] 70 [151] 100

Approx. Wt. Lbs. [kg] 42 53 66 83 99 124 151 180

Dimensions in Inches C [254] [286] [298] [340] [381] [432] [476] [546] D/E 7 1/4 8 1/8 8 1/4 9 3/8 11 3/4 12 1/2 14 1/4 16 [184] [206] [210] [238] [298] [318] [362] [406] F 20 3/8 21 3/4 25 1/8 27 1/8 30 32 1/4 34 1/8 36 [518] [552] [638] [689] [762] [819] [867] [914] G 9 7/8 11 7/8 14 16 3/4 17 1/4 19 7/8 22 1/2 24 1/2 [251] [302] [356] [425] [438] [505] [572] [622]

3 [75]

[19] 10 [24] 11 1/4 [30] 11 3/4 [38] 13 3/8 [45] 15 [56] 17 [68] 18 3/4 [82] 21 1/2

ENGINEERING SPECIFICATION: ZURN Z-1170-E-KC Acid Resistant Coated interior and exterior fabricated steel grease interceptor with anchor flange and clamp collar, PDI, rated at ____ GPM and ____ Lbs. grease capacity, with internal air relief by-pass, bronze cleanout plug and visible double wall trap seal with removable combination pressure equalizing/flow diffusing baffle and sediment tray. Gasketed non-skid secured cover complete with Z-1108 flow control fitting. Acid resistant coated interior and exterior fabricated steel extension section (Specify 'C' Dim. required). Regularly furnished with a high inlet and outlet connection. Note: Location of outlet from bottom of interceptor cannot be changed. PREFIXES _____ Z- Acid Resistant Coated Fabricated Steel* _____ ZS- All Type 304 Fabricated Stainless Steel SUFFIXES _____ -K _____ _____ _____ _____ _____ _____ Anchor flange 1 3/4 [44] down from top and 2 [51] wide. A 3 [76] minimum extension height is required when anchor flange (-K) option is specified. (Specify 'C' Dim. height required.) -L Angle type (Z-1108-L) flow control device. -R Recessing receiver for recessed installation is equipped with adjustable support brackets and gasketed non-skid cover with covered recessed lift handle. -RE Recessing receiver enclosed type for recessed installation. Furnished with adjustable support brackets and gasketed non-skid secured cover with covered recessed lift handle. -T Cover recessed for tile/terrazzo. A 3 [76] minimum extension height is required. (Specify 'C' Dim. and required recess depth - 1/8 [3], 3/4 [19], or 1 1/4 [32]). - Y Removable lift out sediment bucket. ** Inlet and outlet sizes shown indicate standard operating sizes and flow control setting. Size #300 will have 3 [76] connections reduced to 2 [51] and sizes #600 thru #800 will have 4 [102] connections reduced to 3 [76] as standard. If changed, flow control must be adjusted accordingly.

REV. A

DATE: 12/4/98

C.N. NO. 81896

*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED

DWG. NO. 60231

PRODUCT NO. Z-1170-E-KC

ZURN INDUSTRIES, INC. ¨ SPECIFICATION DRAINAGE OPERATION ¨ 1801 Pittsburgh Ave. ¨ Erie, PA 16514 Phone: 814\455-0921 ¨ Fax: 814\454-7929 ¨ World Wide Web: www.zurn.com In Canada: ZURN INDUSTRIES LIMITED ¨ 3544 Nashua Drive ¨ Mississauga, Ontario L4V1L2 ¨ Phone: 905\405-8272 Fax: 905\405-1292

Information

60231.p65

1 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

328582


Notice: fwrite(): send of 197 bytes failed with errno=104 Connection reset by peer in /home/readbag.com/web/sphinxapi.php on line 531